code 32 problems with new EGR setup.

[ZenkiKid]

so lately ive been having peek a boo CEL problems when id be going around 70-75 at 3k rpm, even with a new EGR. i finally pulled the ECU to find out it was code 32.. EGR function, and now ive been having idle problems since the transducer was replaced, what can i do to fix this?

[ma71supraturbo]

I'm right there with ya. Will be going through this today: http://www.240sx.org/faq/articles/ecm_code_32.htm

[deesz]

same problem ended up being two things.
1. the hose that connects the transducer was cracked so every once in a while it was leaking.
2. the charcoal canaster had a glog going to the egr witch through a egr code...

i fixed it by blowing out the lines and replacing the hose the. the hose that connects from the transducer to the metal tubing is only about 2 inch's long and is right under the transducer..
if you want to make sure if your egr is getting vacuum turn your car on, put your hand under the egr you should be able to feel the diaphram. rev the engine and feel if it moves..if it dosnt you know its not your problem

[redZENKI]

Somewhat related: can a code 77 (rear o2) set off a code 32?