$50 spacers: 5mm,10mm, 15mm 4&5 lug

[Nagaremono]

So I got some spacers made for myself, but I had to put in a minimum buy at this machine shop. I have a ton left over and I am selling them to anyone who wants them. They are drilled for 4x114.3 and 5x114.3 so you don't need new ones when you go from 4-lug to 5-lug. I have them in 5mm, and 10mm. Solid aluminum, really nice quality. here they are. PM me if you want a set. Shipping is usually $10/set (two spacers) to the lower 48 states.

http://i14.photobucket.com/albums/a332/Orangejdmsilvia/Products%20to%20move/double.jpg

5mm
http://i14.photobucket.com/albums/a332/Orangejdmsilvia/Products%20to%20move/5mm.jpg

10mm
http://i14.photobucket.com/albums/a332/Orangejdmsilvia/Products%20to%20move/10mm.jpg

15mm
SOLD OUT!!!

To clarify a pair is two spacers.

For orders and questions, PM me. thanks.

[Dustxking]

So if im correct 110$ for 2 sets of the 15 mm spacers? Shipped?.


PM'd

[Nagaremono]

For 2 sets it is $120 shipped, $60 per pair shipped to the lower 48 ($50-spacers $10-s&h).

PM's replied to

[Nagaremono]

all PM's replied to

[Nagaremono]

well a lot of people have been asking, and yes they are hub-centric on 240's

[markyboi]

is it 50 a pair on any size?

[Nagaremono]

you are correct. $50 a pair, any size.

[99maxgtr]

i'll take a pair of the 15mm shipped give me paypal and i give you moneeyz.

[Nagaremono]

i'll take a pair of the 15mm shipped give me paypal and i give you moneeyz.

you've been PM'd

[Nagaremono]

people have been asking about these being hub-centric, so here is a picture of them on some 5-lug hubs for your reference:
http://i124.photobucket.com/albums/p32/elmg0003/spcer002.jpg

[DriftinAndy]

Still Have Some For Sale?..

[LimeLite Racing]

got any 4 lug 15mm left?

[Nagaremono]

DriftinAndy and Limelite, check your PM's

[implayaz9]

how much for 5mm shipped to 32819?

[Nagaremono]

how much for 5mm shipped to 32819?

$60/pair shipped anywhere in the lower 48 states.

[Nagaremono]

All PM's replied to, thanks.

[Nagaremono]

Still have a few in all sizes guys, all PM's have been answered.

[iitywygms]

Money sent. :naughty:

[Nagaremono]

Spacers getting shipped tomorrow. Pm's replied to. I have a TON of 10mm left and plenty of 5mm and 15mm left as well.

[iitywygms]

Thanks! They look great.

[driftage240]

got any 5 lug 15mm left?

[Nagaremono]

yes, still have some left. PM's replied to, thanks!

[Nagaremono]

next set being shipped tomorrow. pm's replied to.

[Nagaremono]

plenty to go around.....
http://i14.photobucket.com/albums/a332/Orangejdmsilvia/Products%20to%20move/spacersfull.jpg

[Nagaremono]

PM's have been replied to.

[minisilvia]

PM sent about spacers.

[Chrisw]

I'll take a set of 15 and a set of 10.... I assume shipping to canada can still be done for $20. Area code: T6W 0C7

[irritatedmax]

do you need longer studs to use the 15mm spacers? how much for two sets shipped to 68526?

[Nagaremono]

Chrisw, shipping to Canada is actually a little more, I'll PM you with the exact amount.

irritatedmax: yes extended studs are needed for the 15mm spacers. for two sets of spacers, it is $120 shipped. $60 per set of spacers shipped.

pm's replied to. Thanks!

[JDM671]

4 lug 10mm spacer???? located socal

[DreamN]

Just curious would the 15mm spacers work on stock lugs lengthwise or would it be best to go with extended lugs?

[Flybert]

Just curious would the 15mm spacers work on stock lugs lengthwise or would it be best to go with extended lugs?

Won't even come close. 5mm is the max you wanna go on stock studs.

[Nagaremono]

4 lug 10mm spacer???? located socal

One pair $60 shipped. PM me for paypal info.

[Nagaremono]

Won't even come close. 5mm is the max you wanna go on stock studs.

yes, exactly, thanks Chris.

[CoasTek240]

these look really good, i may have to pick up a 5mm set from you.
-dave

[veeates36]

stupid question.. Is 5mm enough to really make a difference..? Thanks

[Nagaremono]

stupid question.. Is 5mm enough to really make a difference..? Thanks

sometimes it is all you need to make your wheels clear your coilovers...

All PM's have been replied to

[veeates36]

sometimes it is all you need to make your wheels clear your coilovers...


makes sense, thank you very much

[240sxorty]

Check pmssssssssss

[sloterg]

i wanna know if anyone has gotten these and put them on their car yet to see if everything is flush

[Nagaremono]

i wanna know if anyone has gotten these and put them on their car yet to see if everything is flush

Well the spacers are machined 6061 billet aluminum so they are perfectly straight if that is what you are implying, but if you are talking about wheel fitment, that is all going to depend on your set up. Here is a picture of my car. I am running 17x9.5 +18 in back with these 15mm's and a fender roll, and in front I have Origin over fenders and I am running a 17x9 +22 with these 15mm spacers.

Front
http://i124.photobucket.com/albums/p32/elmg0003/coupewithwheels016.jpg

Rear
http://i124.photobucket.com/albums/p32/elmg0003/coupewithwheels009.jpg

[Nagaremono]

pm's replied to. still have 50 pairs left guys, help me rid of these, thanks!

[khilgers]

free bump for the locals, buy these spacers. Driftline:bigok:

[Nagaremono]

Still have them in all sizes, pm's replied to. 49 pairs left!

[cuddlesthesheep]

This isn't meant to be a dick comment at all.. just curious but you gotta be making bank on this right? I mean it all comes down to supply and demand. And the cost to make them. Do you do your own machining or what? Again not wanting to be a dick at all in fact i'm interested in the 5's

[Nagaremono]

This isn't meant to be a dick comment at all.. just curious but you gotta be making bank on this right? I mean it all comes down to supply and demand. And the cost to make them. Do you do your own machining or what? Again not wanting to be a dick at all in fact i'm interested in the 5's

Actually I am not making bank on these at all. I just went into a machine shop and told them what I wanted and they made it. I wish I could do my own machining, but I can't even weld very good. The idea was to sell them for more, but no one wanted to pay that much so I said screw it and I am selling them to you guys for what I paid. At this point I just want to recover my investment. Thanks for your interest though and PM for my paypal info if you want to pick up a set of 5mm's.

[minisilvia]

Just got my 10mm spacer and they look great! Legit seller!!
Thanks Scott

[99maxgtr]

i think i going to get the 15's...since my miesters finally came in... 9.5+25 offset i think 10+ will look flush right? lol i forget can you get me the extended studs with these if so how much for spacer and studs shipped. pm me thanks.

nvm i looked through my pm's and found the one that answered my question..i'll send you paypal soon.

[Nagaremono]

Just got my 10mm spacer and they look great! Legit seller!!
Thanks Scott

Thanks man, glad you like 'em!

[Nagaremono]

PMs have been answered, shipped a couple more sets.

[s13for_me]

pm sent!!!!!

[ross.cottrill]

ill take a pair of 15mm please send me paypal info!!

[Nagaremono]

PM's replied to. thanks guys!

[Nagaremono]

All PM's have been answered

[99maxgtr]

hey man did you get to ship out my 15mm spacers and extended studs. last time you emailed me you said you were waitng for the extended studs and i todl you to ship them together at the same time. let me know what's up thanks.

[Nagaremono]

hey man did you get to ship out my 15mm spacers and extended studs. last time you emailed me you said you were waitng for the extended studs and i todl you to ship them together at the same time. let me know what's up thanks.

Yup, got them shipped yesterday.

[floodo1]

My situation is this: I have some Volk GT-C's using the stock (volk) hub centric adapters, which is basically just a little aluminum collar.
I need to move my wheels out about 7mm, so I'd use the 10mm spacer....But if I use these on the FRONT hubs, is there still going to be enough hub material sticking out to still use the stock hub centric collar?

All the other 15mm+ hub centric spacers that i've seen have a step on them that sticks out and gives you something to put the hub centric collar on.

Will the 10mm be fine in this situation?

[Nagaremono]

My situation is this: I have some Volk GT-C's using the stock (volk) hub centric adapters, which is basically just a little aluminum collar.
I need to move my wheels out about 7mm, so I'd use the 10mm spacer....But if I use these on the FRONT hubs, is there still going to be enough hub material sticking out to still use the stock hub centric collar?

All the other 15mm+ hub centric spacers that i've seen have a step on them that sticks out and gives you something to put the hub centric collar on.

Will the 10mm be fine in this situation?

Good question. I believe so, but it wouldn't be much if any (maybe 1-4mm). I don't know many people that are running those hub adapter rings to be honest, so I can't say for sure. The hub ring isn't 100% necessary, but if you want to use it, it is up to you. It will be fine with or without it. I have all three sizes still so if you decide it is something you want to do, just let me know. Thanks!

[Nagaremono]

PM's have been replied to. thanks guys.

[Nagaremono]

PM's have been answered.

[irritatedmax]

just got mine yesterday. super fast shipping and they look great. thanks.

[Nagaremono]

just got mine yesterday. super fast shipping and they look great. thanks.

Thanks man! Enjoy!

[5t341tH]

hey can u still get extended studs? i need 10 14mm knurl ones

[Aeroscraper326]

I will take 2 pairs of the 15mm's. I will let you know soon.

-Peter

Need extended studs aswell.

[Nagaremono]

Thanks for the interest; I can get studs. just let me know if you are 5 or 4 lug and s13 or 14 when you PM me.

[Jonnie Fraz]

Looking to get a pair of 10mm...Paypal please.

[WAAPSSH]

Hey there, I might be interested in some spacers. But how much would a set of 4 lug extended studs for an S14 be shipped?

[Gepeto]

Hey ! Two questions: Will any of these fit the rear of a 4lug s14 ? I'm not sure it's the same hub !

Second Q: If yes to the above, PM how much for 15mm shipped to J5R 5S7 in Canada :) Thanks

[Nagaremono]

Hey there, I might be interested in some spacers. But how much would a set of 4 lug extended studs for an S14 be shipped?

Studs are $4/piece so if you need them all the way around, that's $64 +shipping. Just LMK. THanks.

[Nagaremono]

Hey ! Two questions: Will any of these fit the rear of a 4lug s14 ? I'm not sure it's the same hub !

Second Q: If yes to the above, PM how much for 15mm shipped to J5R 5S7 in Canada :) Thanks

Yes they will fit, and yes I will ship to canada. Please check your PM's.

Thanks.

[s13silvia123]

i'll take two pairs of the 15mm just pm me

[Nagaremono]

PM's replied to. thanks for the interest!

[Nagaremono]

All PM's have been replied to. thanks!

[an_orange_s2k]

do u still have more for sale?

[B-Rock]

i'll take 2 pairs of 15mm

[Nagaremono]

do u still have more for sale?

I have lots in all sizes still. $60/pair shipped in which ever size you want: 5mm, 10mm, 15mm!!!

[Nagaremono]

i'll take 2 pairs of 15mm

check your PM's.

[devonkyle77]

hmm, i will keep this in mind for sure!

[Hawaiian240]

you still have 4 lug 15mm spacers and S13 studs? PM sent.

[Nagaremono]

you still have 4 lug 15mm spacers and S13 studs? PM sent.

Yessir, I do. Check your PM's.

Thanks.

[Nagaremono]

all pm's have been replied to.

[hotlavaflow]

I need two pairs of 15mm shipped to 11226. $120 to your paypal on Tuesday. Sorry it'll take till next week but gotta pay rent this week.

[Nagaremono]

I need two pairs of 15mm shipped to 11226. $120 to your paypal on Tuesday. Sorry it'll take till next week but gotta pay rent this week.

sounds good, just let me know! pm's have been answered.
thanks!

[Nagaremono]

All PM's have been replied to, thanks!

[bryce with a y]

weeeeeeeeeee

[Nagaremono]

All PM's have been answered, thanks guys.

[pinkpandaslide]

still got some? if so, i will be buying some really soon after i put on my wheels and see the fitment. let me know. thanks

[brunswick240]

Just pm'd you :D

[Nagaremono]

Still have a bunch left. 15mm's are getting low, about 5 pairs left.... plenty of 10mm's and 5mm's to go around though. PM's answered.

[Hawaiian240]

Just got my spacers and studs. thanks, that was F!#kin fast!!

[Nagaremono]

Just got my spacers and studs. thanks, that was F!#kin fast!!

Glad to hear, Thanks! All pm's have been replied to.

[Nagaremono]

All PM's have been replied to, thanks!

[Phil703]

Have any 15mm left?

[Nagaremono]

Have any 15mm left?

Lots of people asking about them, but still have about 5 pair left.

[Full-Lock]

interested in a set of 10mm for 5x114.3
i didnt read the whole thread but did you use extended studs with these?

lmk

thanks

[Nagaremono]

yes, for a 10mm spacer you would need to run extended studs.

[Nagaremono]

Only 3 pairs of 15mm's left, still have a decent amount of 10mm's and 5mm's left though.

[Nagaremono]

FYI...NO MORE 15MM'S.... ALL GONE.
Still lots of 10mm's and 5mm's though. hit me up if you're interested.

Thanks!
-Scott

[iHeartTheTouge]

pm'dmsdlengthalphabetsoup

[Nagaremono]

all pm's replied to. thanks!

[Nagaremono]

PM's replied to....Thanks.

[skateboard p]

10mm 4x114.3 shipped to 35216 thanks!

[skateboard p]

pm'ed u bro!!!

[Nagaremono]

all PM's answered. thanks.

[codyace]

haven't got any 15's back in stock yet have ya?

[Nagaremono]

haven't got any 15's back in stock yet have ya?

sorry man, not yet. I was thinking about getting some more made, but it would be a couple weeks before they were ready. I'll let you know though. thanks!

[codyace]

Sounds good.

I know how it is to wait on CNC shops!

[Nagaremono]

PM's replied to, thanks.

[Nagaremono]

All PM's replied to, thanks everyone for the interest.

[Nagaremono]

Still have about 15 pairs of 10mm's and 10 pairs of 5mm's left guys. PM me if interested... Thanks!

[dakine240]

ill take a pair of 10mm.

[Nagaremono]

spacers shipped and pm's replied to.

[Nagaremono]

all pm's replied to.

[McCoy]

Got mine... Thanks!

[Nagaremono]

Got mine... Thanks!

Good to hear! Hope you like them!

[exitspeed]

Only 3 pairs of 15mm's left, still have a decent amount of 10mm's and 5mm's left though.

FYI...NO MORE 15MM'S.... ALL GONE.
Still lots of 10mm's and 5mm's though. hit me up if you're interested.

Thanks!
-Scott

all pm's replied to. thanks!

PM's replied to....Thanks.

all PM's answered. thanks.

PM's replied to, thanks.

All PM's replied to, thanks everyone for the interest.

Still have about 15 pairs of 10mm's and 10 pairs of 5mm's left guys. PM me if interested... Thanks!

spacers shipped and pm's replied to.

all pm's replied to.

You get a total of 2 bumps. Please read the rules about what are considered bumps.