[180sx] M2 hanbai in 17x9.5 ET30

[redman]

Hi , I want to buy M2 hanbai wheels for my 180sx , this model ,

NC-10R :

http://img293.imageshack.us/img293/9324/img3647gb4.jpg (http://imageshack.us)
http://img156.imageshack.us/img156/3428/img3648jv1.jpg (http://imageshack.us)

I want to know if you have pics on 180sx and if the 4 wheels in 17x9.5 ET30 can put on my car with any modifications ( spacers ? rolling fender or other )

Thanks a lot and sorry if my language isn't perfect ( i'm french :bowrofl: )

Yann

[Quail]

This is the pic request thread:

http://www.zilvia.net/f/showthread.php?t=169628

Post it in there :)

[ZenkiKid]

prepare to pay more or at about the same price of the rim for shipping.

[Quail]

I assume he can get the wheels where he is, but he wants to know about fitment issues, and if anyone has pics of them fitted.

[redman]

I assume he can get the wheels where he is, but he wants to know about fitment issues, and if anyone has pics of them fitted.


Exactly :bigok:

[Slidin240Wayz]

it'll look sunken.

get +20 or +15 if you can

[naed240sx]

Going to Need at least 15mm spacers to even clear the suspension, and you will need to roll and possibly pull depending on tire size and camber.

[DOOK]

it'll look sunken.

get +20 or +15 if you can

I agree... +15 at the minimum.

[CrimsonRockett]

I agree... +15 at the minimum.

Second this.

My 17x9 +20 is starting to look a bit sunken to me even though it's completely flush with the fenders.

17x9 +15 ftw.

[Bushido]

copied from the other thread:

redman,
to run those wheels on the front of your 180sx you're going to need at the very least a 15mm spacer, so that you don't hit the coilover. It depends on the model coilover you have, but I know that 9.5 +15 will clear Part Shop Max and Stance coilovers.
I run 18x9.5+15 with a 225/40 and I have less than 2mm clearance, about a credit card width.

Megan and K sport and i'm sure some others I have heard will not clear and thus, require a thicker spacer. As for modifications for the front... the usual fender lip rolling, harness relocation, and wheel well hammering is going to be required.

for the rear you should get 15mm spacers as well to make the wheels flush with the body. you'll only need to do a minor 2-3mm pull, without adjustments to camber.

BTW, where are you getting those wheels? multispoke is apparently the 2008 hotness, i'd like a pair.

[Ca_laurier]

BTW, where are you getting those wheels? multispoke is apparently the 2008 hotness, i'd like a pair.

rhd japan sell them. they $1000 shipped i believe

for the money i would just bump up to work emotions or something with better sizes

[2iv0 sx]

I thought 17x9 only came in +20 offset?...

Check out Daryl's thread
http://www.zilvia.net/f/showthread.php?t=137708

I love the cancave on these wheels