FS: Racing Sparco NT-R, 17x9 +15, 5x114.3 w/ Falken tires

[OptionZero]

WHEELS ARE SOLD








Was gonna save these as track wheels, but with school and work I probably won't have time to do it for a while, so I'll put these up for now. Please read the entire post before asking any questions, I hope I have gotten to everything.

-Wheels: Racing Sparco NT-R-
color: bronze
wheel size: 17x9 all around
offset: +15 all around
bolt pattern: 5x114.3 all around
face: face is slightly concave, straight spokes
weight: 17.2 lbs according to this page (http://www.mx6.com/forums/551308-post6.html)
construction: cast

condition:
Wheels have been tracked. Noticeable curbage on two wheels. Right rear wheel (the one with the smudged center cap, pictured below) was slightly bent when I got it and did not balance 100%. I had it professionally repaired; all the wheels were fine when I tracked them. Nothing noticeable when I dailyed on them either; because it is on the rear it doesn't affect alignment or how the car tracks (straight and true). Other surface imperfections are as shown, these wheels have been used, after all.

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1701.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1700.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1699.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1698.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1704.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1705.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1706.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1707.jpg

-Tires: Falken FK-451 GR Beta-
size: 235/40/17 front; 245/40/17 rear

Condition:
Good tread remaining, no real camber wear that i can see

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1712.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1711.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1703.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/DSCN1702.jpg

...
Brake clearance:
Will clear big brakes laterally and spoke-wise. I ran 300zx calipers w/ 350z rotors and there was plenty of room.

Coilover clearance:
Will clear any coilover on either S13 or S14 (or R32/R33), haven't heard of anything that doesn't clear this size.

Fender clearance:
As usual, depends on ride height, camber, and fender mods. Assuming you're not at stock or near-stock height, you'll need to roll your fenders on S13/S14.
My car (white kouki pictured below) ran -3 in front, -3.5 rear; rolled fenders all around, pull in rear. You probably won't need to pull the rears unless you're this low (moderate height, not superlow).

http://img.photobucket.com/albums/v482/OptionAero/Infineon%202-11/IMG_0251.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/IMG_0244.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/IMG_0308.jpg

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/IMG_0252.jpg

...random zenki pic I found, coincidentally had the same color calipers as me. These are not my wheels, someone else's car in Japan...

http://img.photobucket.com/albums/v482/OptionAero/Sparco%20sale/s137.jpg


Random Notes:
- requires narrow lugnuts which are included (Gorilla)
- these wheels are out of production and cost $225 new
- about the best sizing you can get for cast wheels
- look better than lame FN01RC's that everyone has


Price is $800 picked up with tires, but I'll listen to offers. At the moment, will not ship and will not remove tires unless you pay for removal ($10/tires). Please don't low ball me, if you don't have money, just get some MB Motorings or something.

Wheels are located in San Francisco (94122)

FOR S14 KOUKI OWNERS:
If you buy my hood (link in sig) as well, I will give you a fatty discount and love you forever. For real.

PM or hit me on AIM (JetForze)

[wanganwonder]

those shits are the best

i miss mine

[OptionZero]

back to the top

[sideview_180sx]

fucking awesome wheels. i thought no one else had these wheels still. Mine came off the Ks Factory car. Free bump.

[A Spec Products]

These wheels is cool, and hard to find in good fitment

If I had my issue of DT in the 180sx issue there's a clean 180sx featured with these

Has 326 wing

Looks good

[wanganwonder]

they weren't hard to find when discount tire had them on clearance

looks like i wasn't the only one who came up on that

please ignore gay car. i just like dudes, get over it.

http://img.photobucket.com/albums/v281/wanganwonder/max2.jpg

http://img.photobucket.com/albums/v281/wanganwonder/parkin.jpg

[Slidin240Wayz]

Nucking Futs.

These rims just got cooler!

[OptionZero]

Wheels Are Sold