Exhaust tranny mount bracket

[spirit]

Looking to get one, really hate going to a stealership. Any way to know which part is for my car? (1990 240sx sohc M/T)

http://www.courtesyparts.com/betasite/kb_search_result.php?chassis_id=9&keywords=exhaust+tube+mounting+bracket&Submit_Button=Go&cat=1

Would be one of these, but no idea which one...

20711-S13001
20712-S13001
20713-S13001

[Matej]

Give them a call, Courtesy Parts are pretty cool people. I took that bracket off haha.

[KA-T_240]

^Have you started to have problems with studs breaking on your turbo/ other parts of exhaust?

My buddys car doesnt have that bracket and he has SOOOO many problems with stuff coming apart it isn't even funny.

[Matej]

Well I'm running an SR downpipe on a KA-T, so my exhaust tucks way higher than before. I struggled for half an hour to try and make the cat line up with the bracket, and when I finally did it there was so much pressure that it bent the bolts, so I just took the bracket off. No problems so far but I'll keep checking up on it.

[racepar1]

Dude I JUST bought one. It only lists for like $20 so why not just get a brand new one?

[98koukile]

I don't have that bracket. After my MT sway it didn't fit anymore so I tossed it, to no ill affect (knock on wood)

[burnsauto]

i called up my dealership awhile back about the same problem (bolts were vibrating off the turbo extension/studs snapping/etc)

its actually like...two or three parts (not including the hardware) and nissan LOVES to make you pay for each individual part. the total between the parts was between 50-100 bucks.

[projectRDM]

Two pieces of flat stock, some hardware, and an angle grinder can make any bracket you need for less than $10.

I'd strongly suggest using something, it's a well known fact that a swinging exhaust system will eventually destroy the manifold and/or studs.

[WERDdabuilder]

brace everything guys. get one. i need to make a run to the junkyard and if i get lucky again ill find another. every 240 there that i look at the bracket is cut or smashed by the forklifts.