View Full Version : WILL BE PARTING OUT A FULL KADE with BLOWN BLOCK **SOCAL**
SiI40sx
01-10-2008, 11:31 PM
Up for sale are misc. KADE parts. Dizzy, plug wires, coilpack, valve cover, intake, cams, manifold, exhaust mani, etc. All parts have 98k miles on them and were in good working condition.
**Currently looking for interested buyers, will post prices and pictures of everything later when the SR swap begins**
WILLING TO SHIP
PM me with a list of parts your interested in, this was a full stock kade running car, only thing that seems bad so far is the block.
SCato
01-11-2008, 01:32 AM
shipped price for the temp sensors? ecu and dash
SiI40sx
01-11-2008, 09:33 AM
Sorry but the harness is not being sold, its needed to complete my SR swap wiring harness. Everything else that I dont need is up for grabs!!
Viet-Tam
01-11-2008, 09:43 AM
I might be interested in the rear oil seal retainer with bolts,and oil block with all the bolts that go with it. Also will need the two screws that hold the distributor to the upper front cover. How much for these shipped to 38834?
thagremlin
01-11-2008, 09:45 AM
hey how much for dizzy and coil.. shipped to 93955
SiI40sx
01-11-2008, 10:47 AM
shipped price for the temp sensors? ecu and dash
Hows $70 for ecu and temp sensors with shipping included?? (Uhhmm... Im not selling a dash :) just engine parts)
I might be interested in the rear oil seal retainer with bolts,and oil block with all the bolts that go with it. Also will need the two screws that hold the distributor to the upper front cover. How much for these shipped to 38834?
I can get you everything except the dizzy bolts (dont really want to part that out) ummm not too sure what the parts your asking for go for so make me an offer???
hey how much for dizzy and coil.. shipped to 93955
Hows $75 for both with shipping included???
SiI40sx
01-11-2008, 07:39 PM
the following parts are pending local sale:
distributor, stock intake pipe, airbox and maf. charcoal canister with vacuum lines. piping from after the downpipe to exhaust.
the following parts are pending sale shipped:
ecu, temp sensor
S13Boosts
01-11-2008, 07:47 PM
where you located?
CrimsonRockett
01-11-2008, 07:51 PM
He's in Monterrey Park. Like, right across the street from ELAC.
Hey whore, you still doing your SR swap this weekend?!
SiI40sx
01-11-2008, 08:02 PM
He's in Monterrey Park. Like, right across the street from ELAC.
Hey whore, you still doing your SR swap this weekend?!
Im doing it next weekend..... hehehehehe oh man....
grnappletree14
01-12-2008, 01:02 AM
do u have the following let me know pm me
14 p/s pump
s14 ka alt
s14 ka distruibter and cap
s14 ka start
s14 ka manual ecu 3c
s14 ka engine harness
s14 lower harness manual
dipstick
IcedOutSoulja13
01-12-2008, 02:06 AM
pm'd u about head assembly...lmk
SiI40sx
01-12-2008, 02:54 AM
all PM's responded too.
*Update*
THIS MOTOR WILL START TO BE TAKEN APART THIS WEEKEND
For asap response, PM me, Ill be checking my PMs often.
the following parts are pending local sale:
distributor
stock intake pipe
airbox and maf
charcoal canister with vacuum lines
piping from after the downpipe to exhaust
complete head assembly
s13for_me
01-12-2008, 05:24 PM
u got a 5spd transmission?
SiI40sx
01-12-2008, 09:48 PM
I do but its not for sale.
KA IS OFFICIALLY OUT AND READY TO BE PARTED, LET THE PART ORDERS BEGIN!!
SiI40sx
01-13-2008, 02:07 PM
bumpy bumppppp
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.