Map sensor location.

[drftmark]

Where is everyone who runs a standalone with a map sensor putting the map sensor and running the vacuum line to?

[jspaeth]

Um manifold..............?

I feel like this is rhetorical

[the head]

Running Haltech E6X with 4bar Gm map sensor

My MAP is mounted to the firewall on the passenger side above the pinch weld right next to my UEGO translator box tapped hole in manifold for pressure reading

[Koopa Troopa]

http://i21.photobucket.com/albums/b267/koopatroopa187/Sillbeer%20S14/CRW_0822.jpg

My MAP is in the sub injector hole in the cold pipe... No vacuum line is going to it as the sensor is electronic.

[MA JasonG]

Running Apexi PFC and its in the Greddy Manifold.

[drftmark]

Um manifold..............?

I feel like this is rhetorical

Well ya the manifold... I meant WHERE on the manifold. Sorry for the confusion.

[jspaeth]

Oh I simply assumed that one should run a vacuum line off the intake mani to the sensor, but I guess it depends what kind of sensor it is.

[drftmark]

Ya sorry its a haltech e8.

[fakts13]

if your map sensor has a nipple for a vacuum line use any available vacuum port on the manifold and mount the sensor where you have room.