sblack13
01-08-2008, 09:10 PM
Ok i'm trying to get rid of some stuff I no longer need, so here is what i'm getting rid of.
Z32 N/A Rear Brakes, complete with spindle, 5 lug hubs that are needed for 5lug conversion, rotors, calipers. $150
2X Stock S13 91-94 "SE wheels" brand new all seasons. $50
Tanabe Sustec Strut bar for S13/S14/S15, slight scratches etc the usual $60 ($100 brand new)
1 LHD Black Dash - No Defects - $100
1 LHD Black Dash- small hole drilled to secure an afc2 to it. Very very unnoticable. Comes with Black Center console, Power Window Door Panels, Glovebox and Black Carpet. (Basically everything you need to convert your front to black expect the pillers) - $150
1 SAFC2- Blue barelly used for about 2000 miles. Comes with original box and instruction - $200
1 "NA" ecu for a Kouki S14 SR20DET (buy this and send it off to get a tune)- works great $100
1 S15 JDM ECU tuned by Mines- unsure if it works, never had a chance to try. Was taken apart to look inside at the chip. I ran the number its some unknown year (one of those remanufactured S15 ECU'S, and will not work on Austrialian/European Harness's) - $50 If it works will work with S14 Chuki/Kouki SR Harness as well. (white ecu plug)
1 S14 SR20DET engine harness (missing F8, F10, Instrument Cluster Plug, CAS Plug, Both ECCS Relays, and MAF Plug) was wired up for a S13, so abs and wiper wiring aren't there. I switched to a Zenki SR20 harness. Great for peeps who have a S14 SR20DE and want to switch to a Power FC.
$60
4 370CC Injectors from a S14 SR20DET. All are in working condition, and were running in my car less than a week ago. Straight bolt/plug on/in for ka-t people.- $100
1 T28 S15 Turbo (needs actuator still works but only does like 4-5psi) $200+ your GOOD sr t25.
1 Pink "Dildo" (those long clear shift knobs) needs extra fitting to thread into a Nissan. $20
1 Stock SR20DET S13/S14 oem flywheel and exedy stage 1 clutch (flywheel was just resurfaced for $50 and clutch has 90% life left I paid $130, $180 all together
take both for $50
1 running KA24E needs timing chain, other than that it's clean. and missing an oil pan because some idiot took it off.
$100
91-94 Chuki Bumper- black- rough rough condition cut for front mount. Picture can be sent. $35
1 Stock SR20DET S13 but will work with S14 hotpipe complete with couplers and new clamps - $20
1 Nardi Steering wheel ripped near the top and leather is wearing quite considerably. Comes with a hub $50
1 S14 KA24DE AEM Intake - $180 brand new
$50 used
1 Stock OEM S13 Fastback rear bumper- painted GTR Metallic Grey (has chipped paint near the license plate and is missing the bumper support). $50
1 Set of 4 Lug S13 Hubs- $15 front and rear.
Z32 N/A Rear Brakes, complete with spindle, 5 lug hubs that are needed for 5lug conversion, rotors, calipers. $150
2X Stock S13 91-94 "SE wheels" brand new all seasons. $50
Tanabe Sustec Strut bar for S13/S14/S15, slight scratches etc the usual $60 ($100 brand new)
1 LHD Black Dash - No Defects - $100
1 LHD Black Dash- small hole drilled to secure an afc2 to it. Very very unnoticable. Comes with Black Center console, Power Window Door Panels, Glovebox and Black Carpet. (Basically everything you need to convert your front to black expect the pillers) - $150
1 SAFC2- Blue barelly used for about 2000 miles. Comes with original box and instruction - $200
1 "NA" ecu for a Kouki S14 SR20DET (buy this and send it off to get a tune)- works great $100
1 S15 JDM ECU tuned by Mines- unsure if it works, never had a chance to try. Was taken apart to look inside at the chip. I ran the number its some unknown year (one of those remanufactured S15 ECU'S, and will not work on Austrialian/European Harness's) - $50 If it works will work with S14 Chuki/Kouki SR Harness as well. (white ecu plug)
1 S14 SR20DET engine harness (missing F8, F10, Instrument Cluster Plug, CAS Plug, Both ECCS Relays, and MAF Plug) was wired up for a S13, so abs and wiper wiring aren't there. I switched to a Zenki SR20 harness. Great for peeps who have a S14 SR20DE and want to switch to a Power FC.
$60
4 370CC Injectors from a S14 SR20DET. All are in working condition, and were running in my car less than a week ago. Straight bolt/plug on/in for ka-t people.- $100
1 T28 S15 Turbo (needs actuator still works but only does like 4-5psi) $200+ your GOOD sr t25.
1 Pink "Dildo" (those long clear shift knobs) needs extra fitting to thread into a Nissan. $20
1 Stock SR20DET S13/S14 oem flywheel and exedy stage 1 clutch (flywheel was just resurfaced for $50 and clutch has 90% life left I paid $130, $180 all together
take both for $50
1 running KA24E needs timing chain, other than that it's clean. and missing an oil pan because some idiot took it off.
$100
91-94 Chuki Bumper- black- rough rough condition cut for front mount. Picture can be sent. $35
1 Stock SR20DET S13 but will work with S14 hotpipe complete with couplers and new clamps - $20
1 Nardi Steering wheel ripped near the top and leather is wearing quite considerably. Comes with a hub $50
1 S14 KA24DE AEM Intake - $180 brand new
$50 used
1 Stock OEM S13 Fastback rear bumper- painted GTR Metallic Grey (has chipped paint near the license plate and is missing the bumper support). $50
1 Set of 4 Lug S13 Hubs- $15 front and rear.