FS: R33 brakes, Greddy FMIC, 17x9'sw/RA1s, Ti exhaust n more

[DET Deion]

I posted some of this stuff earlier with no pics, so here are some good pictures. All of the parts have hardly been used, some not at all. Prices are firm, feel free to make serious offers but i'm in no rush to sell the parts.

1.)
R33 Skyline (I think GTS-T) brakes. Front/Rear calipers loaded, rotors, Stainless steel lines, and COMPLETE ebrake setup. 700.00
They were obviously used when I bought them, I never used them on my car (was never running at the time) painted all but one rear caliper with high performance caliper paint as well as the edges and hats of the rotors. surface rust but its to be expected of any rotors that have been sitting for a little bit.
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0113.jpg
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0114.jpg
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0116.jpg
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0117.jpg

2.)
Greddy VSPL front mount with piping S13 SR20DET. Had it for a while so it looks a little worn but hardly any miles on it and its a great setup, not to be confused with the new M spec that is a less efficient core design. 500.00
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0118.jpg
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0120.jpg

3.)
2 5Zignen 17x9 +15 FN01RCs with Toyo RA1s 255/40. Never used them, beautiful R compound (DOT approved) tires. 650.00. I'd consider dismounting the tires for the right price.
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0122.jpg
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0123.jpg

4.)
random - s13 open diff and side shafts - make an offer, nothin special
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0128.jpg

5.)
JIC magic Bullet full titanium exhaust 11lbs! No resonator, it sounds great and fitment was perfect, all slip joints are nice too. 1600.00 silencer included
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0129.jpg

6.)
Sparco seat bracket, slider, and side rails S13 driverside. Fit my Bride ZetaIII nicely and will obviously work with sparco seats (and perhaps some others i'm not sure). Everything you need 150.00
http://i144.photobucket.com/albums/r192/cjdeion/DSCN0140.jpg


I also have alot of other parts that I don't have pictures of yet.

complete motor and tranny with lots of extras
peak performance street 5lug hubs
r33 stock rear 5 lug hubs
apexi downpipe with bung welded in for wideband 02
3" test pipe
apexi AVC-R
Defi oil temp gauge
Defi gauge controller
powder coated and modified suspension arms (some boxed in with poly bushings)
nismo powerbrace
koyo radiator w/fingerchopper fan
apexi super suction kit (for Z32 MAFS)
z32MAFS w/ pigtail
S13 silvia fenders
JUN fiberglass over fenders
walbro fuel pump
apexi turbo timer
plus a rps13 shell thats in good shape
and some other stuff I can't think of

i'm located in South Kingstown, RI
feel free to send me a PM

-Lemmy

[Wangan kid]

bump niceeeee

[cc4usmc]

dont forget to post the offset of the wheels, someone will eventually ask.

[guitarz1]

Where are you located?

[brn2slid]

are the bracket/sliders 150 shipped? i priced them around that new... let me know

[DRFT180]

Is that all four Fn's with tires for $650? And Offsets?

[DET Deion]

Edited the missing info.

-only 2 wheels/tires
-offset +15
-i'm located in South Kingstown, RI
-I had trouble finding prices online for the sparco side brackets but I was comming up with 80.00 for the base and around 50 for the slider, I might be able to do 150.00 shipped depending on where you are.

-Lemmy

[deesz]

how much for the box of land o lakes

[timlush]

Let me know if you are willing to part with the e-brake cables.

[DET Deion]

No, I would rather not sell the ebrake cables separately, I would like to keep everything in tact as a package.

[yusuke1923]

Now Thats A Baller Exhaust!! Denng!!!!

[hunter8411]

If your willing to part with the ebrake assembly and ebrake cables let me know. Thanks.

[DET Deion]

again i do not want to part out the brake setup, sorry.

[DET Deion]

Just to be clear - shipping for the brake setup will obviously be a bit expensive, they are packed well in a decent sized box and the brakes (mainly the rotors) are quite heavy.

[jc_rps13]

any pics of downpipe?

[beavis360]

nice wish i could get the brakes... anyway bump for tiny hands burger king guy

[mosilvia]

$680 shipped for 1) R33 brakes.
Lets me know.

[Slow Poke]

Are there really Skyline rotors or are they Z32? Thanks

[hotlavaflow]

Bump for a gangsta a$$ exhaust.

[DET Deion]

They are really R33 skyline brakes, not GTR (as those were even nicer brembos) but I believe a GTST, I do not remember the dimensions but they are somehow slightly larger than Z32 or R32 rotors.

and yes, I love this exhaust, you can pick it up with a couple fingers, it doesn't corode, and sounds and looks sick. Slip joints make it nice too especially because the muffler is easy to remove to make you seem even more obnoxious on race days!

-Lemmy