boss hub adapter

[a100pureplayaz]

ok i got a new steering wheel i had a quick disconnect and it had alot of play. so i bought a new steering wheel with a boss hub adapter i installed it. problem 1 when you turn the wheel and let got for it to turn back it stays still not good. problem to theres on wire for the horn that goes to the horn button but two pieces. problem 3 the turn signal stays on instead of shutting off when the wheel turns. any help would be great becuase i need a inspection for the horn and the turn back thing is just unsafe thanks so much guys

[murda-c]

Which steering hub adapter did you get?

Also, do you have an s13 or an s14?

[a100pureplayaz]

i have a s14 and its called a boss hub adapter

[murda-c]

They're all called a boss hub adapter. I mean what brand/model.

The s13 ones have two tabs sticking out for turn signal cancellation, that you usually have to break off for s14s.

Show any pictures you've got.

[a100pureplayaz]

dont have any pics cause its on the car i have the box in front of me though can that help tell which model i have? any idea about the turnback situation?

[JDMClifford]

has it always done that? because thats one of the problems when you have worn out ball joints. and for the horn, you are going to need to wire it up like an aftermarket horn.

[S13Boosts]

im guessing you got that hub off ebay?:rant2:

[Dousan_PG]

get a better hub
get a WB from logan
shits like stock.

[a100pureplayaz]

yea the hub was from ebay and i didnt have the problem with the quick disconnect one and it was from ebay as well um when i put the car on a jack to check the ball joints it turns back fine and also if i switch back to the quick disconnect it works better