View Full Version : KA SOHC rebuilt but won't start......help
the3SecondJerk
10-06-2002, 04:32 PM
I just finished rebuilding my KA24e. Everything seemed fine. The car will only turn over however. Its getting spark for sure. So we figure its the injectors not firing because the plugs are dry and the fuel is getting into the fuel rail. Does anyone have an idea of what can be the problem?
mrdirty
10-06-2002, 06:44 PM
sure u got firing order correct?
transient
10-06-2002, 09:41 PM
firing order would just make it run like shit, it would at least try to start. You could always pull an injector and put it into a container and then try to start the engine. That would defintately tell you if it was firing or not.
LexusRules
10-06-2002, 10:10 PM
did you check that your ecu is connected proporly? if some pins are not connecting that would not let your injectors fire or even not deliver spark. Check it out <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>
the3SecondJerk
10-07-2002, 01:54 PM
well the ecu was never removed so it should be fine
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.