[FS] Killer's Hatchback Tail Lights!

[KiLLeR2001]

Ah yes, finally! After about a month of planning and preparation, I have completed three, yes only THREE sets of my custom made tail lights.

For those of you who have no idea what I'm talking about, view this thread please...

http://www.zilvia.net/f/showthread.php?t=166144

Now onto the sale.

These tail lights come with brand new bulbs and are in mint condition. Asking price is $250 firm (shipped continental US only) and will include USPS tracking number with insurance. I've got plenty of bubble wrap and squiggly things so you won't have to worry about improper packing.

On one of the sets I have, there are some small hairline cracks on the left tail light on the red part. The right tail light is mint. I will let this set go for $225 shipped.

So to make things clear I have the following available:

-1 set with small hairline cracks on the left tail light (right one is fine) for $225 shipped.

-1 set in mint condition will go for $250 shipped.

First three people in this thread to call dibs will receive a PM from me with required paypal information for purchase. Make sure you state in your post whether you want the $225 set or one of the $250 sets. If anyone flakes on the sale then I will pick the next person to call dibs on them, so even if you see three people that already got dibs call it anyways incase they flake out.

PLEASE KEEP IN MIND THESE ARE NOT PERFECT! I DID ALL THE WORK WITH MY KEEN EYE AND STEADY HAND. DO NOT EXPECT PRECISION LASER CUT PATTERNS.

I will not be accepting refunds so do not buy these if you have any doubt with the work I've done but rest assured I spent all my free time in these so they are not poorly crafted.

If you have any other questions ask in this thread so that everyone can see, please no PM's unless its for a justified reason. Thank you.

Now onto the pictures...(I know they suck, all I have is my camera phone)

http://tehl33tsite.com/240sxdd/tails/12-31-07_2107.jpg
Here's a picture of my work area. The tail light in the picture is pretty much done, just need to clean up around the edges.

http://tehl33tsite.com/240sxdd/tails/12-31-07_2109.jpg
This is a set on a random S13 seat. Nice.

http://tehl33tsite.com/240sxdd/tails/12-31-07_2112.jpg
Close up of the corner.

http://tehl33tsite.com/240sxdd/tails/12-31-07_2113.jpg
Close up of the rounded end.

http://tehl33tsite.com/240sxdd/tails/12-31-07_2132.jpg
Another set on the table.

http://tehl33tsite.com/240sxdd/tails/12-31-07_2140.jpg
Brand new bulbs!

edit: 1st set sold to TheTimanator

[S13Boosts]

those are hot man..:bigok:

[exitspeed]

Which ones are mine? I wanna see what they look like. Nice job man!

[KiLLeR2001]

Which ones are mine? I wanna see what they look like. Nice job man!

LOL! No idea man they are all mixed up now lol. :naughtyd:

[fc3s kit]

I haven't decided yet. I'll formulate a price once I make another set. The ones I have on my car now took me two days, but that was because my dremel died after 30 minutes of use, and took 4 hours to recharge.

edit: i promise itll be under $200 shipped to any location :naughtyd:

i will only use mint conditioned OEM tail lights, so they will be like new (no scratches or scuffs) and will include the bulbs!

Aw... $200 shipped sounded a littler nicer. Slick job though. Real nice.

[KiLLeR2001]

Aw... $200 shipped sounded a littler nicer. Slick job though. Real nice.

yeah I know but it took me a little longer and more people wanted it than expected, if you can't go kouki tails id definitely get these.

p.s. the ones on my car arent as good as these 3 sets i made (im sorta jealous!)

[fc3s kit]

I think I'd take these over kouki tails if the turn signal sections were a little darker. But that's just me. Well worth the asking price.

[KiLLeR2001]

you could always smoke them if you want :)

[satal95]

any pics of the one with the hairline crack?

[TheTimanator]

I'll take a set if you still have one of the mint condition sets available. I can send you paypal when I get back in town tommorow afternoon. Let me know....

[KiLLeR2001]

any pics of the one with the hairline crack?

They're so small that my camera won't even pick them up, from a distance it's impossible to tell, only when you look at them up close and personal.

I'll take a set if you still have one of the mint condition sets available. I can send you paypal when I get back in town tommorow afternoon. Let me know....

PM Sent.

[Teddy]

Can you do these for coupes?

[k's_silvia2.0]

^What he said.

[KiLLeR2001]

Can you do these for coupes?

The coupe tail lights bend too dramatically at the end for the pattern to maintain the shape without causing severe stress which would more than likely lead to cracking... maybe if I can get a cheap pair of coupe tails I could try it out, but I doubt it'll work right.

And like I said in my other thread, I hopped a curb (back end first) and slammed sideways into a tree, and my tail lights were unaffected, so they will hold strong. :rawk:

[Teddy]

Thats a shame. These would look so sexy...

[k's_silvia2.0]

^What he said:wtc:

[KiLLeR2001]

Thats a shame. These would look so sexy...

Personally, I'd keep the stock coupe tails how they are. Even if I were to swap out the amber piece with a clear pattern it wouldn't match the stock clear section... unless of course I take out that clear section too... still, it wouldn't work :smash:

Also, I probably won't be making anymore of these. Unless I can find a quicker less time consuming way, this time around was almost too much to bare.

[KiLLeR2001]

*bump*

Didn't think I'd have to, c'mon people I know you want these!

[KiLLeR2001]

Updated original post. As of right now this thread is exclusive to Zilvia. Tomorrow I will venture out onto other forums so don't miss the opportunity!

:duh:

[DOOK]

after i get rid of my hatchback... ahh well...

[Snott Rocket]

www.procarparts.com (http://www.procarparts.com) used to sell some that look just like those for $180 and you got the center piece

[KiLLeR2001]

www.procarparts.com (http://www.procarparts.com) used to sell some that look just like those for $180 and you got the center piece

That's cool and all. This is my own personal customization and time spent, I could care less about other versions of similar designs.

[S13Boosts]

word i would love to see this on a coupe!:x:

[KiLLeR2001]

word i would love to see this on a coupe!:x:

Just retro fit these in place and bondo the empty areas. Durr. :hammer:

[downshift_sideways]

Dude as retarded as this seems.

I had a dream about your taillights last night...lmao.

You gave me a free set ;)

[KiLLeR2001]

Dude as retarded as this seems.

I had a dream about your taillights last night...lmao.

You gave me a free set ;)

LMFAO!!!! Holy shit I almost spit up the water I was drinking after reading that hahahahaha. :bigok:

[low and slow]

(starts saving)

[Drifter Z]

good work man :)

[KiLLeR2001]

I finally got a couple pictures of the one tail light with small hairline cracks... These cracks are actually on the inside of the red part so they wouldn't be affected at all if it were to rain...

http://www.tehl33tsite.com/240sxdd/tails/112-1234_img.jpg

http://www.tehl33tsite.com/240sxdd/tails/112-1235_img.jpg

[[w]hite[r]abbit[x]]

wow those tail lights are amazing! that's what they should've looked like OEM. I wished i had those tail lights if i owned an S13.

[KiLLeR2001]

I'm willing to let the $225 set go for $200 shipped, don't miss out on these you may regret it later down the road.

[Matej]

Could you make full clear ones like this?
http://www.uniqueautosports.com/pricelists/General/Silvia%20Parts/180cleartaillights.jpg

[Ineedparts]

so is that 200 shipped for the ones with the hairline cracks?

[KiLLeR2001]

Could you make full clear ones like this?
http://www.uniqueautosports.com/pricelists/General/Silvia%20Parts/180cleartaillights.jpg

God no, thats ugly as shit.

so is that 200 shipped for the ones with the hairline cracks?

Yes. (these are pending sale right now, however)

[thedecapitator]

Could you make full clear ones like this?
http://www.uniqueautosports.com/pricelists/General/Silvia%20Parts/180cleartaillights.jpg


nice!! that would look clean with a pearl white paintjob and some deep dish rims chrome fucken ballafied

damn the things u can do to a piece of shit 240sx
nice :wiggle:

[LloydXmas]

awesome, the tails look great free bump for you my friend. Might have to see later on if you do any more sets in the future.

[KiLLeR2001]

$225 SET HAS BEEN SOLD!

ONLY ONE SET LEFT! DON'T LET IT GO!

[esmeuskees]

The coupe tail lights bend too dramatically at the end for the pattern to maintain the shape without causing severe stress which would more than likely lead to cracking... maybe if I can get a cheap pair of coupe tails I could try it out, but I doubt it'll work right.

And like I said in my other thread, I hopped a curb (back end first) and slammed sideways into a tree, and my tail lights were unaffected, so they will hold strong. :rawk:

hmm.. i bet u could probably use a heat gun to shape the sharper curve on the coupe tails just an idea for u.

[KiLLeR2001]

I still have the last set, $250 shipped to your doorstep. Includes insurance and tracking number. Don't miss out on these REALLY!

[KiLLeR2001]

$225 shipped to your doorstep w/ tracking number and insurance! doooo it!

I've been holding onto these for too long, someone buy the last set! :bigok:

[sked707]

Damn i wanted to make some like these too but never got around to it.
Glad to see someone else do it. Lookin good man..props to ya.

[happy408]

are there any cracks to the last set?

[sb253]

nice work man. If i had a hatch, id swoop. GLWS

[KiLLeR2001]

are there any cracks to the last set?

Last set is mint condition, baller ass tails.

[happy408]

if some one buys the last set are you going to make more?

[drift into a curb]

stop dilly dallying window shopping etc and just buy the last set. I'm sure he'd be able to work out something, like you pay $125 today and $100 in two weeks.

[LoanShark]

Already sent a pm asking for his paypal... wth

[ClutchKickThatBitch]

Those are nice oh well if only i had a hatch but i have a coupe

:wackit:

[KiLLeR2001]

if some one buys the last set are you going to make more?

Probably not. Unless theres a higher demand.

[KiLLeR2001]

SOLD! :bigok:

[KiLLeR2001]

***** 2 YEAR BUMP *****

If there is a demand for these I might make a few more sets... Let me know guys.

$250 shipped.
$200 shipped if you provide the tails.

[s13bert]

omg ive been wanting to do this to mine, but not sure exactly how to..these look amazing dude, glws.......

[LB240driftr]

Hey do it!!! U got my vote!! Only one thing...
Pretty sure ur idea is mass produced now in led form
http://i8.photobucket.com/albums/a21/carmaster/7c290655.jpg

this time change it up...make em neon green er do sumn to make these lights new once again...with ur quality and creativity I'm sure it won't come out ricer!!!

[racerx2k1]

No commercial sales.