RB26dett for sale

[Ernie]

I am selling an R33 RB26dett long block including turbos and intake manifold. This engine only needs ECU, harness, and ignitor to run. The engine is ideal for a rear-drive setup in that the GTR oil pan has been modified to maintain the structural integrity of the engine. The differential housing has been removed. The engine has ARP head studs installed. I assembled the engine with all new gaskets, seals, and a new timing belt. All bearings, pistons, and cylinders were inspected. I am in a pretty tight place right now so I am only asking $2500 for this setup.
Serious inquries only please.

-Ernie Fixmer
email me at.. [email protected] ([email protected])
__________________

[k's_silvia2.0]

You gotta post pics especially with a motor;)
Trust me no one will believe a brand new member with 0 post.

[SuperiorS14]

its ernie fixmer......................the pro d1 driver........ if you know who he is then you will believe him........

[k's_silvia2.0]

HAHA Oh wait I think ive seen him off of Benson in Chino pulling the Rotora
S13.5 into the Garage.

[exitspeed]

its ernie fixmer......................the pro d1 driver........ if you know who he is then you will believe him........

Oh why didn't he just say so. :rolleyes:

He's gonna need to post pics. No one in their right mind is going to buy a $2500 motor from some on the internet without pics.

[sxe]

^ true story!! very interested!! PICS!!

[xpl2007]

Ernie Fixmer is the man.. X Mckinney motorsports guy.. Long time old G Driver!
He knows his shit!!!
Good deal on a rb26 thats been inspected and moded........
Post some pics of what we all get....
thanks
MY s14 is lonely.... Fresh new paint next week...!!!

[sxe]

^^ X mckinney guy? ive only herd of mack and gary....

[Project3328]

dude ernie does good work and probably doesnt have time to post pics.. if ur serious about it email him and im sure hell get u pictures

[k's_silvia2.0]

^No email for pics.

[Ernie]

My partner Jose took pics I am waiting for him to get them uploaded.


A guy already emailed me with some questions...these are answers you may need.

How many miles? don't know, but can find out. My friend Yee Min pulled it out of his R33gtr from a blown head gasket. I put it together out of a box. The head has been resurfaced and I used ARP head studs with a stock head gasket. I haven't used it for my drift car yet. I am awaiting a sponsor to finish the car. I don't really have the funds to finish the car. I am tight on cash right now so I just need to get rid of it to catch up on bills. I can pick up another one later. Intake manifold is complete with stock injectors and all. It needs a few hoses like one of the fuel lines and one of the turbos needs a return hose. Just a few external pieces needed. I can't do a compression test due to lack of starter. I did inspect all the rings and cleaned the pistons so nothing broken there. Turbos were functioning fine when the engine was removed. They do spin freely and are stock. They were replaced by HKS turbos. My partner is uploading pictures of it today. I did not replace the oil pump or a water pump. I did dissassemble the oil pump and inspect it. It looks great. Water pump seal feels tight. Shipping can be done by Kaizen.

Ernie

[thetopcow]

when you dismantled the oil pump assembly from the engine did you take note weather or not it had the infamous crank collar issue or not?

[mayco_86]

when you dismantled the oil pump assembly from the engine did you take note weather or not it had the infamous crank collar issue or not?

Sorry buddy that infamous crank collar issue was only an issue on the older rb26dett like the ones that came on the R32 model.:fruit:

[Ernie]

http://smg.photobucket.com/albums/v150/onebad7m/Nissan%20parts/?action=view&current=12_31_07006.jpg (http://smg.photobucket.com/albums/v150/onebad7m/Nissan%20parts/?action=view&current=12_31_07006.jpg)

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07008.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07007.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07002.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07001.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07004.jpg

[drifter808]

glws. i met you awhile back on oahu for extreme drift. I was a friend of Steevos visiting. probably dont remember but its all g. good luck.

[drftwerks]

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07007.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07002.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07001.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07004.jpg

http://img.photobucket.com/albums/v150/onebad7m/Nissan%20parts/12_31_07008.jpg

[Ernie]

If anyone in the SoCal area wants to check out the RB. I am located in Walnut less than a mile from Valley and Grand intersection off the 60 and 57 freeways intersect. 3990 e. Valley Blvd, Walnut, CA 91789

Ernie

[drifting.8]

Ernie is the man

Met him in hawaii

Bump for legit guy..!!

[xpl2007]

Ernie if you have this in Feb i will take.. Cant right now moving to busy...
Ill pm you my #!

[Hooorahh!]

doubt it but is rb25 tranny included?

and u said there stock turbos .. but then u said there replaced with hks turbos?????

i know u said u dont have a starter but can u get one? thats kind of a big thing considering the buyer would want to be some what sure the compression is good ...
price firm?

serious buyer btw ...

also please pm me ur number ...

[xpl2007]

I am sure no rb25 tranny or id buy it when he thought about selling it.. Starter.. You can order as many as you like from Japan takes 5 days and shipping is cheap... Or go on a Canadian forum... Cheap all day long... You can also cross refreance them.. Ernie Fixmer is trust worthy.. ask anyone in D1...

[ByeByeSti]

Interested, if my audi sells in the next couple of days id like to try and buy this. how much would shipping be to 03815?

[B Love]

Ef Madness dont F&^k around

[noequalibrium]

somebody needs to jump on this. if i had the money, i would!

[B Love]

Some one buy this thing already

[Gavster]

is this still for sale?

[Arauz]

still for sale?

[ThatGuy]

Thread Starter hasn't posted anything since January.

No need to continue bumping a dead thread.

If he still has this engine to sell, he can start a new thread. I highly doubt that though.

:lockd: