Bottom Mount Seat Rail?

[nissandr1ft]

I've been searching, but haven't come across anything final. I'm looking for a bottom mount rail that will keep stock to lower than stock driving position. I've seen the bride MO rail, but then I've also seen that people were having modify for a correct seating position. I've seen the Corbeau rails, but everything I've seen shows the seating position being sky high. Other than making custom rails what are my options?

[Dousan_PG]

bride will be the lowest
tahts about it
done.

[BoostedCoupe]

i have a bride mo type and it fits fine in the car. Only problem i had was bolting the seat to the rail(jic magic) but i think since the seat being used the hole for the bolt was bent a little. My jic with the bride rail seats lower than the factory seat. Buy it youll love it.

[nissan240sxkid]

the brides and jic are low but if you could do side mount the nagisa/nams auto super low rails let me sit the bottom of my sparco's on the floor of the car. I have the bride rails (bottom mount) on brides seats in other car, although with the bride rails and brix seats it seems to me that the front of the seat is a bit higher than stock but the back or butt part is as low if not lower....

[blownmotor]

I believe buddy also makes seat rails for S chassis

[BoostedCoupe]

the brides and jic are low but if you could do side mount the nagisa/nams auto super low rails let me sit the bottom of my sparco's on the floor of the car. I have the bride rails (bottom mount) on brides seats in other car, although with the bride rails and brix seats it seems to me that the front of the seat is a bit higher than stock but the back or butt part is as low if not lower....
yup same way as me. The butt part seems like it sets lower. i noticed that when i first set in mine.

[slideways2004]

i made my own.

[EJ253]

nagisa ultralow seatrail seems pretty sick. thats what i just ordered.

i dont think its bottom mount tho, you'd have to check on that

[Koopa Troopa]

My Juran bottom mount with Recaro adapters is so low anyone under 5'10 has problems seeing over the dash.

the seat is a Recaro SR3 and for a general idea of how low it is the top of your head covers the Recaro if you're 5'11

http://i21.photobucket.com/albums/b267/koopatroopa187/Sillbeer%20S14/CRW_0794.jpg
http://i21.photobucket.com/albums/b267/koopatroopa187/Sillbeer%20S14/CRW_0859.jpg
http://farm3.static.flickr.com/2161/2037678618_0a4a620d5c.jpg

[A Spec Products]

bride will be the lowest
tahts about it
done.

Yep

Bride MO

Don't buy any rail other than Bride, Nagisa, or Juran

(Nagisa is pretty much identical to Juran, if not the same manufacturer but rebox)

Bride is the easiest to get and probably what I'd go with