S13 DCC w/o subharness

[tknbkthrsdy4anfg]

Alright guys, I have a problem my DCC didn't come with a subharness (its from a 98.) I dug up all of these threads about doing the JDM Digital Climate control swap into an S13 and none of them have the info I'm looking for. Has anyone does this swap without the subharness? Do you have any pinouts or anything?
Thanks alot. Also, anyone who has done it with the subharness. do you have the colors of the wires coming out of the controller and to the car? Thanks.
http://www.zilvia.net/f/showthread.php?t=154426&highlight=S13+Digital+Climate+control
http://www.ziptied.com/?p=49
http://forums.nicoclub.com/zerothread?id=160285
http://forums.nicoclub.com/zerothread?id=5142
http://forums.nicoclub.com/zerothread?id=94307
http://www.chuonthis.com/cars/s14-dcc/#wire
http://www.nissansilvia.com/forums/index.php?showtopic=1912

[tknbkthrsdy4anfg]

I got it figured out!
I'll post pics and info later! :rawk::boink::naughty:

[tknbkthrsdy4anfg]

Ok so here is all of my stuffs laid out.
http://i48.photobucket.com/albums/f218/tknbkthrsdy4anfg/DSC_0006.jpg
I used to weatherpac (?) 4pin connectors for the smaller gauge stuff.
http://i48.photobucket.com/albums/f218/tknbkthrsdy4anfg/DSC_0007.jpg
And this connector for the larger gauge.
http://i48.photobucket.com/albums/f218/tknbkthrsdy4anfg/DSC_0008.jpg
Its connected to this fan blower-harness, which no longer has the spade connector, its now tied directly into the blower power from the fuse box
http://i48.photobucket.com/albums/f218/tknbkthrsdy4anfg/DSC_0005.jpg
Made another 2-pin weatherpac for the ambient temp sensor.
http://i48.photobucket.com/albums/f218/tknbkthrsdy4anfg/DSC_0009.jpg
And here is my heater motor mount.
http://i48.photobucket.com/albums/f218/tknbkthrsdy4anfg/DSC_0011.jpg
I don't have the A/C figured out... yet.

[noynek]

This is old but did you ever figure out the harness wiring. I have a dcc with a cut subharness and I am trying to splice into to Factory location