FS: S13/S14 cup holder arm rest (NICE)

[happy240]

READ CAREFULLY

PAY PAL VERIFIED !
https://www.paypal.com/us/verified/pal=le_ryan007%40yahoo%2ecom
PM me for Purchasing info.

DO NOT SEND ME MONEY UNLESS I APPROVE OF IT !!



Send me your lid, and its $40shipped for S13 and $45 for S14

Prices are :

- S13 padded cup holder lid $40+shipping

- S13 padded lid (no cups) $35+shipping



NO MORE S14 LIDS, I DONT LIKE MAKING THEM




For serious buyers PM me or, E-mail me [email protected]

.
.
.
How their made : http://www.zilvia.net/f/showthread.php?t=175941
.


I just orded these new cup holders : http://www.txpokersupply.com/table_hardware.htm the ones labled
Regular Plastic
Drop In Cup Holder
3" Width, 2.25" Depth

and my paypal wont clear till the 21st, so they wont be available until a few days after then .
.
.


Heres a padded Dual cup holder
http://img209.imageshack.us/img209/4561/stuff002uk3.jpg

http://img170.imageshack.us/img170/9242/stuff004ja9.jpg

Im not condoning these drinks in the car .....
http://img293.imageshack.us/img293/5761/paddedduallid008wh1.jpg (http://imageshack.us)

http://img261.imageshack.us/img261/8720/paddedduallid003jc9.jpg (http://imageshack.us)



Softer is better .......
http://img525.imageshack.us/img525/8899/paddedduallid005to5.jpg (http://imageshack.us)



even fits a grande Taco bell cup !!
http://img516.imageshack.us/img516/3085/paddedduallid001mi5.jpg (http://imageshack.us)


S14 lid

http://img136.imageshack.us/img136/9712/s14lid001hg5.jpg (http://imageshack.us)

http://img186.imageshack.us/img186/1639/s14lid002yj3.jpg (http://imageshack.us)

http://img155.imageshack.us/img155/8394/s14lid002rg2.jpg (http://imageshack.us)

http://img170.imageshack.us/img170/6135/small20cupholdermy7.jpg (http://imageshack.us)


http://img106.imageshack.us/img106/4011/1000603kt2.jpg (http://imageshack.us)




Heres a Padded S13 lid.
http://img174.imageshack.us/img174/7/122307003wn1.jpg (http://imageshack.us)

http://img174.imageshack.us/img174/8650/122307004mh4.jpg (http://imageshack.us)

http://img179.imageshack.us/img179/9813/122307006ka3.jpg (http://imageshack.us)


http://img530.imageshack.us/img530/7799/112007007zl6.jpg (http://imageshack.us)

[FaLKoN240]

Damn, that S13 interior is so clean, I forgot what kinda car I was looking at.

[shawn240sx]

Hey nice interior. how did you get the silver paint to look so clean. Any specific brands? I have been lookin gto do this as my interior needs an update...any info much appreciated. Nice interior glws.

[happy240]

well the paint i used is duplicolor wheel paint (gunmetal), and yes, its good, even 2 years later, no cracks chips or fade.
I know your supposed to use interior paint, but it seems to work fine for me.

[happy240]

bump for updated info

Also i have 2 made, ready to be bought shipped, roughly $35.oo shipped.

[StaticX27]

You have any other payment options by chance? Why no paypal, it seems to be the standard currency for online sales like this ><1

[happy240]

well i HAD paypal, then i forgot the password, and the security question, so when i tryed to make another, i couldnt (" this account number already exists") and when i contacted my bank to try and disconect the paypal from it, they said " they dont know how " so from there i said screw it, ....
and iv just never bought/sold anything with out using my credit card


ill try and look into it some more, it appears ill be needing it .

[happy240]

bump, cause i made an S24 lid with 2 cup holders

[happy240]

and an S13 lid with 1 cup holder.

[Mister.E]

dude those covers are nice! do you have any that fit on a RHD console?

[90KAcoupe]

how much for a s13 one with 1 cup holder.. i'll send u mine. shipped to 37122??

[s13pignose]

check pm msg lth

[happy240]

dude those covers are nice! do you have any that fit on a RHD console?

i could modify the RHD one if i had one, send it to me, ill fix it up.


how much for a s13 one with 1 cup holder.. i'll send u mine. shipped to 37122??

shipping is roughly $10 in the US, so for the single cup holder, ill let it go for $40 shipped .


check pm msg lth
PMed


KEEP IN MIND, I HAVE NO PAY PAL, sorry.
money orders are good .
PM me for ready buyers.

[happy240]

:bigok: ...............................................

[Mister.E]

i could modify the RHD one if i had one, send it to me, ill fix it up.

cool man. if i can find an extra one anytime around this damn place ill be sure to hit you up.

[happy240]

your in Japan ?

[Mister.E]

yessir

msglngth

[Dutchmalmiss]

Do you have any padded S13 glovebox's available? If so, how much shipped to 90041 please.

[StaticX27]

Please do get something like paypal. Personally I don't like just sending out money orders with no possible recourse if you skirt. I think you can also call in and work it out with paypal over the phone, and they can either reset your password or something along those lines.

I'm not questioning your integrity, its just me being (overly?)-cautious with my money. I need that false sense of security from using something like paypal. I want to order one though, so it wouldn't be wasted effort :)

[5t341tH]

wow those cupholders are cool. ^^ im with him, if u took paypal, u'd get more serious buyers

[DrftKingIII]

Bump for Ryan, Ive seen his work in person and is very good at what he does.

Helllllllllllllllaz reputable in our area for his interior.

[happy240]

$35.oo
http://img151.imageshack.us/img151/8778/paddedduallid010co7.jpg
http://img516.imageshack.us/img516/3085/paddedduallid001mi5.jpg
http://img293.imageshack.us/img293/5761/paddedduallid008wh1.jpg

[happy240]

Ill work on Pay pal tomorrow for sure guys .

Thanx MIKE !!

[happy240]

Do you have any padded S13 glovebox's available? If so, how much shipped to 90041 please.


not at the moment, the one pictured isnt padded, just covered in vinyl.

[Dutchmalmiss]

not at the moment, the one pictured isnt padded, just covered in vinyl.

Will you be selling any of those at all in the future? Consider me a buyer if you are!

[happy240]

i could make one and hit you up when im done, their usually harder and take more material and time ... Prolly $45+shipping .

[DreamN]

quote for s13 armrest with two cup holders please. would also like to know what is the turn around time?

quick note, my current armrest is cracked on top. would that make a difference?

[happy240]

quote for s13 armrest with two cup holders please. would also like to know what is the turn around time?

quick note, my current armrest is cracked on top. would that make a difference?

$35.oo if you send me your old one.

I can make one of these in about an hour and a half, and im gathering more materials and lids to have them ready to be bought shipped.

Once i get a request, i start building one, and once i receive payment, i ship it out.

As for the crack, i would suggest a new one, drilling two 3inch holes kinda takes a bit of the structural integrity out as it is ..

[BusBOy]

this should be on the fabrication thread..
bump!!

[!Zar!]

Glad to see you have your own hustle.

Props.

[StaticX27]

I appreciate working on the paypal!

If ya get that or any other payment service type things worked out I'll be sending you money instantly :)

[Dutchmalmiss]

i could make one and hit you up when im done, their usually harder and take more material and time ... Prolly $45+shipping .

Let me know. I'll buy it.

[happy240]

Updated inventory in first post

http://img340.imageshack.us/img340/5705/s13liddualki8.jpg (http://imageshack.us)

[cxlo8331]

paypal yet?
once set up, i will deff consider picking up one for the s13.

[happy240]

Im working on pay pal now, I created another pay pal account, and am trying to cancel my old account, to activate this one.
Ill post up when it all done.

- Ryan

[happy240]

PAY PAL VERIFIED

https://www.paypal.com/us/verified/pal=le_ryan007%40yahoo%2ecom

[satal95]

interested in the s13 dual cup holder. So basically i send you my lid and you send it back with the holders or do u sell them pre made already lmk very interested

[markyboi]

interested in the s13 dual cup holder. So basically i send you my lid and you send it back with the holders or do u sell them pre made already lmk very interested

same question.

[happy240]

Yeah, im out of pre made dual cup holders, so basically, send me yours and ill fix it up, and ship it back .

here are the options


- S13 padded, Dual holder lid - $35+shipping

- S13 padded, single, forward mounted, holder lid - $30+shipping

- S13 padded, single, rear mounted, holder lid - $30+shipping

- S13 padded lid $25+shipping


- S14 padded, dual holder lid - $35+shipping

- S14 padded, single, foward mounted, holder lid - $35+shipping

- S14 padded, single, rear mounted, holder lid - $35+shipping

- S14 padded lid - $30+shipping


- Ryan

[KA-T_240]

How much for the glove box thing for a s13? Shit, ill go for the arm rest also with no cupholders. paypal ready.

edit:

pm me pricing. I can ship you stock ones if you need them.

[satal95]

So which one is this one?
1 - S13 padded, Dual holder lid - $35+shipping

[happy240]

So which one is this one?
1 - S13 padded, Dual holder lid - $35+shipping

the one that will go to the first buyer that sends me their lid.

[240truk]

how bout for brown interior???? Interested in a single cup one for my s13

[happy240]

i dont have any brown vinyl .. I could check the fabric store, see if i can find a good match .

[happy240]

http://img209.imageshack.us/img209/4561/stuff002uk3.jpg (http://imageshack.us)
http://img120.imageshack.us/img120/7452/stuff003hf5.jpg (http://imageshack.us)
http://img170.imageshack.us/img170/9242/stuff004ja9.jpg (http://imageshack.us)

[happy240]

ready to be shipped

http://img444.imageshack.us/img444/6138/stuffdr8.jpg (http://imageshack.us)

[happy240]

Mods, please change my title to : "FS: S13/S14 center counsil cup holders (NICE)"

[YoungRookie]

I want an s13 one with single rear mount cup holder. I can send money order out to you on friday. Do you have any of the rear mount one holder s13 lids already? Because ifor sure 100% am sending you payment on friday, these things are badass

[happy240]

unfortunatly i dont have any rear mounted ones ready, i need more arm rests sent in, If you send yours, i can fix it up and ship it back.

- Ryan

[apex]

lets go guys buy his arm rest shit is sick
good seller has alot of rep on nico too

[cheapscheisst]

great guy and great stuff. i've seen one of his s14 cupholder armrests in person. looks awesome.

[YoungRookie]

I will be sending you my spare arm rest, would i get a better price if i send you 2 arm rests?

[happy240]

I will be sending you my spare arm rest, would i get a better price if i send you 2 arm rests?

Well, i can knock $5.oo off and pay the shipping there ?

really cant do much more than that, these could actually be sold for much more, trust me, they are NICE, im not just saying that cause i made them, i really surprised myself.

cheapscheisst - Thanx man, Ill be getting that lid from you shortly, im running low, need more lol


apex - your a good man, thanx alot .

[happy240]

Updated prices, all i have left is Dual S13 cup holders
everyone who has bought one has loved it, and im sure they'll post up soon.

SEND ME LIDS TO SAVE MONEY !!!!

[2fast4y0u]

were about in illinois are you located?

[happy240]

4 hours south of Chicago, near St. louis MO.

[2fast4y0u]

doh. im an hour west of chicago. i was hoping i could drop off/pick up. guess ill have to ship
Thanks

[happy240]

I have no more pre made lids ATM, I need lids .

[happy240]

Mods, please change my title to : "FS: S13/S14 center council cup holders (NICE)"

Also, if anyone is wondering how these are made
http://www.zilvia.net/f/showthread.php?t=175941

[happy240]

Alright, Im out of lids right now, so if anyone wants one made, ill need you to ship it out.

Ryan

[happy240]

Just made another S14 lid that someone has sent me.



http://img206.imageshack.us/img206/5586/thomaslids14002ia1.jpg

http://img159.imageshack.us/img159/61/thomaslids14003gw2.jpg

[happy240]

prices updated
Sorry, i had to raise the prices, I wasnt making but $10-$15 off them, it wasnt worth the amount of work that goes into them.
Hope you guys understand.
http://www.zilvia.net/f/showthread.php?t=175941

[happy240]

heres an S14 lid that i did, if the guy would have cut the bottom out of the front holder, the cup would sit alot lower.


http://img106.imageshack.us/img106/4011/1000603kt2.jpg (http://imageshack.us)

[DALAZ_68]

SICK!!!...lemme know when i can do this and quote me to 90031 :bigok:

[happy240]

I just orded these new cup holders : http://www.txpokersupply.com/table_hardware.htm the ones labled
Regular Plastic
Drop In Cup Holder
3" Width, 2.25" Depth

and my paypal wont clear till the 21st, so they wont be available until a few days after the 21st some time .

[happy240]

http://img170.imageshack.us/img170/6135/small20cupholdermy7.jpg (http://imageshack.us)

[DALAZ_68]

are the far apart that i could put 2 big hug drinks next to each other without them leaning on one another :goyou:

[happy240]

if they are huge, i would say yes, but the top rim of them would prolly almost touch .

These cup holders a 3 inches in diameter, most fountain drinks are 2.5 at the bottom, and get bigger.

[LimeLite Racing]

That is just straight baller.....I'm impressed.. pm sent

[happy240]

http://img297.imageshack.us/img297/5241/progress003ui1.jpg (http://imageshack.us)