PDA

View Full Version : KA24E parts 4 sale


nismobeast
10-03-2002, 09:45 PM
Doing an SR swap so ive got tons of stuff from my KA24E (sohc).   Several are new items

Injen intake with CAE (everything included except for MAF adapter and filter)
new PS pump and pressure line
4 slightly new injectors (used for 100 miles)
new fuel pressure regulator
new vehicle speed sensor
new 5th gear sensor
new coolant and engine temp sensors
2 TPS sensors (one origional and one with about 1000miles on it)
and EVERYTHING else except the oil pump.

Motor ran great but bent 2 valves on the head.  lower block dosnt look so great, but if bored out would be fine.  Head has no visible cracks but has no compression in back 2 cylinders.  Intake maifold and valve cover have been painted dark metallic blue with the raised letter parts shaved to bare metal.

Everything must go.

Matt T

s13cruzer
10-03-2002, 09:58 PM
hey man , what's up? how about your coolant reservoir tank , and any spare bolts you can throw at me(a lot of mine are broken off from driving and what not , i.e my right headlight jiggles when hits bumps) and i need all the relays for the up and down headlight action , 3 of them i think , if you need more details about that i can get more into it when i check? wanna shoot me a price , (240sxone discount , remeber?lol) , i can also pick up someday if shipping outways a pick-up , thanks man

you can also e-mail me if you want i'm pretty sure it's in my profile

BTW , are those stock new injectors or aftermarket?

91CRXsiR
10-04-2002, 02:33 PM
how much for the intake shipped to 91744( LA )

nismobeast
10-04-2002, 11:39 PM
injectors are remanufactured stock injectors from Python.  bolts from the motor ill have, but I didnt buy a front clip, so i still need the overflow and items needed for the SR.  As for the intake.  I was looking for $150 with the CAE since im going to be keeping hte MAF adaptor.  Ill find out shipping tomorrow.

nismobeast
10-09-2002, 05:18 PM
well, if you are still interested in the intake ill sell it for 150 shipped.  I still have enverything else too.

MAF
throttle body and all sensors
Tranny isnt too bad, no leaks(5 speed), it needs gears and synchro replacement on 1-3, but i have them as well, so if i sell the tranny ill sell the gears and synchros w/ it.

Any questions e-mail me at [email protected]

91CRXsiR
10-10-2002, 03:31 AM
so it comes w/ a injen intake w/ the CAE and all the tubes,brackets and filter complete system minus the AFM adapter?..

how big is the piping i have a adapter on hand..

nismobeast
10-12-2002, 02:00 PM
piping is 3inch (standars air filter size).  the CAE will fit in the hole where the resonator box used to be.  I have the boot that goes to the MAF adapter, but i just need the adapter itself for my SR.  Sorry for the late replay, but ive been busy trying to get his whole SR swap thing taken care of.