PDA

View Full Version : need help!!


bigjake
12-22-2007, 07:15 PM
i have a 1993 240sx, and its an auto, and i found a good 5 speed from a 1990 single cam 240sx, and was wondering if it would be a direct replacement, i need to know whether or not i should buy it

g6civcx
12-22-2007, 07:18 PM
i have a 1993 240sx, and its an auto, and i found a good 5 speed from a 1990 single cam 240sx, and was wondering if it would be a direct replacement, i need to know whether or not i should buy it

Considering you have an auto and that's a 5-speed, it won't be "a direct replacement".

Now if you want to do a 5-speed swap then you need to search.

Please close thread.

Turtle
12-22-2007, 07:28 PM
So you want to make you car manual? Simple. Buy a clutch kit. Resurface the old flywheel.

You need to drill the holes for the clutch pedal which is the only modification you have to do to the car. The rest is the way you took it off is the way you put it back on. I did it myself when I was 14. GL!

g6civcx
12-22-2007, 07:35 PM
Resurface the old flywheel.


You should check to see if the flywheel is reusable or not.

Phlip
12-22-2007, 07:50 PM
The (vague) questions presented have been answered (thanks Ken), and could have very much been answered with a search, as can any remaining questions.
I will close this now.