Tennessee-1993 240SX SE w/ CA18DET engine

[Matt300ZXT]

I'm selling my 93 240 hatch. It has a CA18DET that runs fine. Maybe loud right now since I have the turbo elbow off and might not run efficiently because the O2 of course isn't hooked up. The only mods are a Walbro 255, Blitz BOV, and conical air filter. Everything else is stock. The pics will tell the body side so no need for me to type all that. I have a brand new O2 at the parts store that I'll be picking up today. Depending on which way it sells (with or without new Megan exhaust) I'll have the stock elbow installed back, or the Megan Racing one with the brand new o2. Anywho, the primer is a crappy primer job and the paint underneath shows, you could probably just wetsand the primer off and buff the paint and have a nice looking car. The car needs a fuel level sender installed. It's easy to swap the Walbro 255 over to another fuel pump carrier that has a working fuel level sender, shouldn't take anymore than 20 minutes from start to stop. I've priced the sender units at like $35 bucks or so from a parts car.

The car was the previous owners daily driver and starts up just fine, I just can't drive it locally because it has to pass emissions to tag it. I finally have all the parts now, but if someone wants to buy it before I do the work and save some money, that's fine because I found another car I want and wouldn't mind giving this one up. I'm asking $2500 cash as it sits with stock parts, or $3000 with the Megan turbo back parts. I'm in Chattanooga, TN so it wouldn't be hard at all for someone from Nashville, Birmingham, Atlanta, Knoxville, etc to come pick it up and take it home.

http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX/IMG_0161-1.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX/IMG_0160.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX/IMG_0158-1.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX/IMG_0157-1.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX/IMG_0156.jpg

I'm sure I've left out some sort of info, so if you have any specific questions, feel free to email me at [email protected] or PM me here. Thanks for looking.

[Matt300ZXT]

bump back to the top

[yota man]

what needs to be done to it?

[s15meecrob]

any frame rail pics?

[Matt300ZXT]

To make it run, nothing really Yota. Just bolt up the exhaust and go. It could have some things done to freshen it up, like a new windshield or wetsanding the cheap primer off and other things, but as far as running and driving it, just bolt up the exhaust so it won't be so damn loud.

I don't have any S15, but I'll see if I can get some if it ever stops raining outside.

[s15meecrob]

still waiting on the rail pics

[posdrift240]

I Live in Springcity! About an hour from ya! PM me your number. I might can help you sell it locally! I have a few buddies that live in Chatt that would like to come check it out.

[Project_RaceBreed]

are u interested in trades

[aaronbaird]

is this still for sale?
i'm very interested.

[Matt300ZXT]

Here are some pics of the frame rails. Not a speck of rust, just some dirt in the factory undercoating and a little has scraped off in spots from hitting speed bumps or something I guess, and you can see the factory red paint underneath it.

http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture010.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture009.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture008.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture007.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture006.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture005.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture004.jpg
http://i50.photobucket.com/albums/f311/Matt300ZXT/240SX%20frame%20rails/Picture003.jpg

[Matt300ZXT]

back to the top