View Full Version : 91 Coupe Speedo Problems
Drift N Dragg
12-12-2007, 07:01 PM
I have read some of the other threads and I have tried what they said.. I have a Digital/Hud Cluster, I swapped it for a Analog and rewired it to everything its suppose to be.. I checked all fuzes (Before swap and after swap) ... I ran a direct line from the VSS to the Cluster.. Nothing..... I Ohm'd out the VSS i was told it should be between 200 - 300.. it ohm'd at 255... I am at a loss.. I have swaped, rewired, multimetered, Ren Direct connects, check fuzes, I do not know what else to do.... Can someone give me any other problems that might cause this?
nissan240sxkid
12-12-2007, 07:08 PM
did you find that some of the wire colors were off because its sould work when you swap cluster and harness cuz signals are the same
Drift N Dragg
12-12-2007, 07:13 PM
Some were off but Not too many.. most were direct swaps...
nissan240sxkid
12-12-2007, 07:18 PM
I dont know what the problem is but I have had problems with the wires being slightly off or a pin was in the wrong place......good luck if I can find a answer before someone else I will contact u
Drift N Dragg
12-12-2007, 07:26 PM
Thanks ... This is getting frustrating.. LOL... cant tell the officer "No Sir, I really dont know how fast I was going" LOL
2ilvia
12-12-2007, 08:02 PM
FYI; you didnt state exactly what the problem is, im guessing it simply doesnt work
since you say everything checks out ok, then the coil could be weirding out on you, or the needles just stuck, try banging on it
Drift N Dragg
12-12-2007, 08:20 PM
Oh sorry, i guess i didnt.. Still no Tach or Speedo.. everything else works
Drift N Dragg
12-12-2007, 09:00 PM
I really need my car speed and tach on or no pass smog.. bump bump
bardabe
12-12-2007, 10:32 PM
why didn;t you just swap the sub harness and call it a day, ive done that shit so many times. its plug and play, take old HUD cluster out with sub harness, put new analog cluster in with sub harness. done.
Drift N Dragg
12-12-2007, 11:40 PM
No complete subharness came with it.. it was cut up ... so I only had what I had..I cant just grow a batch of wires, ya know.. LMAO... but If I can find one I would try it
Drift N Dragg
12-13-2007, 12:43 AM
Does anyone know or have a pic of the difference between the DOHC Cluster and the SOHC cluster?
Drift N Dragg
12-13-2007, 01:08 AM
BUMP for help Bump and a Bump
bardabe
12-13-2007, 10:41 AM
Does anyone know or have a pic of the difference between the DOHC Cluster and the SOHC cluster?
teh diference is that the SOHC cluster redlines @ 6.5K and the DOHC redlines @ 7K then obviously the tach singnal for both is diferent. other than that they are the same pin out and speedo. i would say just go to ure local junk yard and find an S13 with an analog cluster. take the sub harness for it its only 4$ and u will
A) make ure car look allot cleaner
B) save yourself a headache
C) won't have to fix it inn the future
D) wont risk burning anything / shorting anything out because of unproper soldering and wraping skillz
:bigok: OK USA!
burnsauto
12-13-2007, 11:10 AM
teh diference is that the SOHC cluster redlines @ 6.5K and the DOHC redlines @ 7K then obviously the tach singnal for both is diferent. other than that they are the same pin out and speedo. i would say just go to ure local junk yard and find an S13 with an analog cluster. take the sub harness for it its only 4$ and u will
A) make ure car look allot cleaner
B) save yourself a headache
C) won't have to fix it inn the future
D) wont risk burning anything / shorting anything out because of unproper soldering and wraping skillz
:bigok: OK USA!
+1......................
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.