PDA

View Full Version : Really really hard to find Skyline parts...

opponheimer
12-10-2007, 06:26 PM
I need to know if any parts below are interchangeable with any USDM parts, and/or if anyone has a connection/hookup and may be able to help me find someone who can locate the following parts.

I don't think this has been touched on, but this thread may be useful for people down the road in the archives..

Doing a R34 GTT Neo Rb25DET swap in an s13 fastback. The drive train utilizes a PULL-Type clutch. My friend bought the motor from drift freaq who supposedly got the motor from a front clip... Surprisingly a few key parts are missing which are disabling us from completing the swap.

- The pin/C-clip combo that holds the clutch fork on the inside of the bell housing for clutch engage/disengagement.
(this would mean that the transmission was removed, and the pin taken off, and I guess lost, by drift freaq or whoever had worked on the engine set.)

- Clutch slave cylinder for the same transmission.

- OEM rb25det shifter.


If anyone can help, I'd greatly, greatly appreciate it, have been looking for a month now, not much luck, a lot of dead leads.
worangejuice
12-10-2007, 06:30 PM
rbmotoring.com
rbmotorsports.com
LB.Motoring
12-10-2007, 06:31 PM
I believe the shifter is the same as, Ka, Sr etc.
opponheimer
12-10-2007, 06:37 PM
I believe the shifter is the same as, Ka, Sr etc.

Some aussies on skylineaustralia said it wasn't but it may be same as a 300zx..

possi rep to you and worangejuice, thanks for the quick replies

Just searched through two skyline fsms, found nothing.

Parts are from an 1998-2000 Skyline GTT ER34 Neo
syline
12-10-2007, 08:01 PM
try rhdjapan.com give em a call they can usually find stuff.
Lith
12-10-2007, 08:07 PM
www.jdmspeedshop.com
Contact Daryl ([email protected]) and ask him to ship you the part. That's how I got my R33 GTS-T e-brake lines that I needed for my S14 and the 300zx e-brake assembly.

If you know the exact part number, then it would be very easy to order. He's a Skyline fan, and I'm sure he will be happy to help :)
opponheimer
12-10-2007, 08:13 PM
www.jdmspeedshop.com (http://www.jdmspeedshop.com)
Contact Daryl ([email protected]) and ask him to ship you the part. That's how I got my R33 GTS-T e-brake lines that I needed for my S14 and the 300zx e-brake assembly.

If you know the exact part number, then it would be very easy to order. He's a Skyline fan, and I'm sure he will be happy to help :)

I just emailed him, thanks +1 to you
Slammed180
12-10-2007, 08:30 PM
http://theskylineshop.com/

You can try them, too.
opponheimer
12-11-2007, 07:23 PM
There was no luck from any of the above. :/
heychris
12-11-2007, 07:41 PM
try www.driftwerks.co.uk (http://www.driftwerks.co.uk) or www.powervehicles.com (http://www.powervehicles.com)
lotsa skyline drifters and or links there...
bardabe
12-11-2007, 07:58 PM
shifter is RB25 - 26 only u can't use a 300ZX one sorry, the slave cylinder is pretty much RB26 compatible. so any RB26 tranny slave will work. R33 RB26 use Pull Type clutches so im sure u can get TOB kit for that u'll be gravy. try contacting mynismoshop.com or COurtesyparts.com
opponheimer
12-13-2007, 01:29 PM
I think the clutch slave is for an altima glx, just orderd one from advanced, we'll see. Anyone know of anyone else i could contact?
DOOK
12-13-2007, 01:32 PM
how about any of our supporting members in japan who can pull parts from a donor over there or hit up a parts store... have you tried that?