S13 owners, who wants some Trust/Greddy DD exhaust?

[Sonic Motor]

Ok, looking for some opinion from all you S13 owners!

Trying to see if it will be worth it to bring back the (discontinued)Trust DD catback exhaust.

Yup, might be able to bring the Trust DD without the Greddy/Trust name.
But still made by Trust, and made in Japan.

Looking at about $500 each (give or take) for brand new catback systems.

So whos interested?


For those who dont know, heres a pic:
http://img231.imageshack.us/img231/6291/73297486ov3.jpg (http://imageshack.us)

[Bushido]

i'd be interested for 200 bucks.

make it like dart izumi. 3in cat back and separate into dual pipes after the axle flange. no need for a muffler.

and who cares if it's made in japan? i mean, its a plus.. but 500 bucks because its made in japan by trust? who cares... its just a few sections of welded pipe...

[Full-Lock]

i think these would really sell.
if i had an s13 i would buy one definatly

[SpuGen]

maybe make it for both S13 and S14, and extend the tips a couple inches?

[Sonic Motor]

i'd be interested for 200 bucks.

make it like dart izumi. 3in cat back and separate into dual pipes after the axle flange. no need for a muffler.

and who cares if it's made in japan? i mean, its a plus.. but 500 bucks because its made in japan by trust? who cares... its just a few sections of welded pipe...

well, i agree its not as aggressive as the dark izumi, but the Trust DD is a great exhaust. It actually has a muffler. When you have the silencer on, its pretty quiet.

[Bushido]

i don't doubt that it isn't a great exhaust, for 500 bucks it should be.

what i'm saying is, you should look into a lower cost alternative...
mufflers make things more expensive (and in my opinion are unnecessary).

240 owners are cheap and not many are going to want to spend 500 on an exhaust, even if its made by a super JDM brand.
Lower that price by 300 and you have expanded your potential market exponentially.

[emersonLP]

Count me in if theres one for an s14

[Sonic Motor]

240 owners are cheap and not many are going to want to spend 500 on an exhaust, even if its made by a super JDM brand.
Lower that price by 300 and you have expanded your potential market exponentially.

Well, bring back a discontinued exhaust isnt going to be cheap.

I know exactly what you mean by the people unwilling to pay the premium price.

IF this exhaust is going to be bring back to life, it will be very limited I suppose, and of course, very exclusive.

If people want cheap exhaust, there are plenty of alternative such as the buddy club(pretty much just a pipe, stupid loud, bad for streets), or cheap ebay knock offs :)

[driftjunky]

you can count me in.

[PoorMans180SX]

If I had the money I'd buy one, haha.

I think it's a good idea though, if it's made by Trust, at least it'll fit right (unlike e-bay knockoffs).

[McRussellPants]

Mild steel draggin.


DD is crap, drags all over the place like apex-i and probably weighs like 500lbs.

[ZX88]

i really like the way it looks but i cant justify spending 500 on an exhaust and watching it get destroyed.but the clearance looks ok.

[s13hybrid]

COunt me in if I end up with a s13! How loud are these? You said earlier they are quiet, but what exactly is quiet? Is it going to be quieter than apexi GT, Blitz nur, etc?

I would definitly buy one if it is!

Also is there anyway I can get instant notification when/if this happens so I can be on board if they are limited quantity?

[Blackparade]

im in, im sure it will make my RB sound fucking amazing!!!!!!!!!

[japslapsilvia]

if it was all stainless it would be sweet!!!!

[andmattsayd]

i'd be interested for 200 bucks.

make it like dart izumi. 3in cat back and separate into dual pipes after the axle flange. no need for a muffler.

and who cares if it's made in japan? i mean, its a plus.. but 500 bucks because its made in japan by trust? who cares... its just a few sections of welded pipe...


amen!!

:bigok::bigok::bigok:

[95KA-Turbo]

Mild steel draggin.


DD is crap, drags all over the place like apex-i and probably weighs like 500lbs.

Mine sits really close to the body of the car and doesn't weigh much at all...like 25-30lbs at the very most.

[Sonic Motor]

COunt me in if I end up with a s13! How loud are these? You said earlier they are quiet, but what exactly is quiet? Is it going to be quieter than apexi GT, Blitz nur, etc?

I would definitly buy one if it is!

Also is there anyway I can get instant notification when/if this happens so I can be on board if they are limited quantity?

It has a muffler, and comes with 2 silencers. Its pretty quite with stock SR.
Its way more quiet apexi GT and nur spec. Those 2 are canister type exhaust, so yeah....

The Trust DD actually resonate sound, and dual exit helps with noise reduction. And it looks bitchin' hahah

If I decide to sell it, I'll start a group buy on zilvia. So you wont miss it ;)

[yokotas13]

noone but a small handful will pay for it
Hell im in japan andi wont pay the used price for one

Dart Izumi > DD
I did pay the price for a Dart

[s13hybrid]

It has a muffler, and comes with 2 silencers. Its pretty quite with stock SR.
Its way more quiet apexi GT and nur spec. Those 2 are canister type exhaust, so yeah....

The Trust DD actually resonate sound, and dual exit helps with noise reduction. And it looks bitchin' hahah

If I decide to sell it, I'll start a group buy on zilvia. So you wont miss it ;)


Cool, I will definitly pick one up. This is exactly what I am looking for. When do you think this would happen?

[Irukandji]

Thats so cheap.

I got a used/ banged up one for $450

[Sonic Motor]

Cool, I will definitly pick one up. This is exactly what I am looking for. When do you think this would happen?

I hope soon, waiting for ppl oversea, and S13 owners on this forum :)

Thats so cheap.

I got a used/ banged up one for $450


Yeeeah! thats why I think its such a good deal too!

Cant even find used ones if you wanted one.

[yokotas13]

liar
i found 3....5 minutes ago on upgarage

[k's_silvia2.0]

Just get me another Blitz nur-spec R:D

[Sonic Motor]

liar
i found 3....5 minutes ago on upgarage

hahaha, I meant in the US.

[markyboi]

Yup, might be able to bring the Trust DD without the Greddy/Trust name.
But still made by Trust, and made in Japan.


just a thought...

if it's not going to have the greddy/trust name, how is it going to be guaranteed that it is actually made by trust?

[Sonic Motor]

just a thought...

if it's not going to have the greddy/trust name, how is it going to be guaranteed that it is actually made by trust?
im sure they will come in a trust box, and still have the JASMA stamp on them.
It will still be exported from japan, and marked "made in japan"

There are many ways to show that its made by trust. Just trying to see who would be interested.



Also for the people who think $500 is too much, what do you guys a reasonable price would be?

[Full-Lock]

if they were priced in the buddy club spec II range i think they would do very well.

that range is what? 350-400

[FaLKoN240]

if they were priced in the buddy club spec II range i think they would do very well.

that range is what? 350-400

I agree.

It's really hard to sell anything to S-Chassis guys brand new, unless it's cheap.

Because most of the new kids are cheap asses, and most of the old school guys have either:

A) Done cars

B) Big plans and don't roll with the fads.

The cheaper that you make it, the more people will buy it. That's obvious I know, but it's the rule of thumb when it comes to selling to the S-Chassis guys until they get real jobs.

I know I'm done tryin to make money off selling stuff to these kids now.

[S13SilviaGirl]

out of curiosity, how are you bringing back a discontinued exhaust? Are you paying to have them re-make them?

[!Zar!]

Shit.

Chances are the op is going to sell Reinhard exhaust or some random ass fencepipes.

Yup, might be able to bring the Trust DD without the Greddy/Trust name.
But still made by Trust, and made in Japan.
You're contradicting yourself.

How could it be stamped as made by them yet not made by them?

[ALEXTHESUS*PECT]

i know you won't have a back bumper fitment problem, but when they come in let me know. i can come down and take some test pics for ya!

[Sonic Motor]

out of curiosity, how are you bringing back a discontinued exhaust? Are you paying to have them re-make them?

They are discontinued because I guess its not worth it for them to keep selling it? In order to get them to start making it again, gotta ask the person in charge, and purchase them in bulk? Havent worked out the fine details yet. But word from Trust is....its doable, they still have the equipment to make it.


You're contradicting yourself.

How could it be stamped as made by them yet not made by them?

Its gonna have a JASMA stamp, and i never said its gonna be stamped as made by them. It might be stamped somewhere...like i said, havent worked out the fine details of it. But its gonna be legit.

[Nikeboy355]

if they were priced in the buddy club spec II range i think they would do very well.
Agreed... $500 puts you right in competition with all the other exhausts...

[sweet89s13]

if i sell my apexi n1 im in.

[Agent_S13]

They are discontinued because I guess its not worth it for them to keep selling it? In order to get them to start making it again, gotta ask the person in charge, and purchase them in bulk? Havent worked out the fine details yet. But word from Trust is....its doable, they still have the equipment to make it.

I remember reading about this somewhere too, I think it was on the Club4ag boards.

Trust said they would manufacture it again if they got a minimum # of orders. I believe it something that's been "known" or at least referenced here on this board a few times also -- they can make it, if they get a large enough order (My memory is bad, but it could be as few as 20, maybe even just 10, to get them to produce an order).

I also understand your concern about getting interest in an exhaust and deposits so you don't waste your time or money with extra exhausts that no one will pay for.

$500 seems like a good price, but I think Scott (240FaLKoN) covered it pretty well regarding most S-Chassis owners. I'd like to think I'm part of the "older crowd" as I've purchased my exhaust and "finished" my car --- I've got to focus my finances on something else now. I'm happy with my current exhaust and really have no plans to "upgrade", even if it was $200.

I recommend you search out those "WTB - Greddy DD" posts on here as there are a few people who would pay that, and with the interest you have in the thread now -- you should be able to fill the required order.

Good luck!

On a personal note, I think it would be great to show the vendors that we like their product and that they is/always will be a market for 240sx parts in the US.

-Aaron
'91 240sx coupe

[Sonic Motor]

yeah, someone is selling the trust DD for the AE86s. I forgot the name of their company.

thanks for your input Agent_S13.

[joshchewuhh]

Im down to get one :D

[Sonic Motor]

Im down to get one :D

awesome!

Anyone else interested?

[YoungGun]

Yes, like others have said buddy club pricing. I would get it if priced at $350.

[Sonic Motor]

Yes, like others have said buddy club pricing. I would get it if priced at $350.

I think the buddy club price is going to go up in the $400 area in 2008.

[kensreliableb18b]

man i remember when everyone was trying to get this exhaust. now people be talking crap about it, saying its expensive and a pos.

carparthookup - before you make an attempt to make an order, i advise that you remember your own interest; make sure its worth while for you because with all this shit talking now, u'll be in it for the long haul if these high expecatations are not met. (saw this opportunity for the DDs a few years ago and it just wasnt worth it)

regardless, GL with everything!

[Full-Lock]

yea the buddy club has a price increase like jan 16th i think it is maybe.

still 400 for this would be cool, but i dont think id go any higher

[civilized_drifter]

^im with full-lock on this one
but i'll take one

[brndck]

i got a used one a few months ago and i really like it. it does hang a lil low, but the sound is really nice, very deep. and yeah, i remember a few months ago there was talk of a reproduction run on club4ag. i think they had to get a min. order of 10. anyhow, for $500 most people would probably get blastpipes instead.

[SexPanda]

id buy it... but id go 400 max, unless it came in solid platinum and was made by midgets.

[overb0ost]

probably the main reason why it'll be so expensive is because of shipping costs

shipping something like an exhaust will probably be 1/4 of the tag price

the exhaust sounds awesome on my stock KA and it does hang a bit low because of the resonator.

trust dd > dart

anyone can make a dart. its a simple straight pipe.....they sound like shit compared to the DD because they are made with stainless all around while the DD is mild steel. Mild steel resonates a lot better giving that deep tone while the dart sounds raspy and shit

my boy has a dart on his s13 and he would trade it for a DD any day

[240trainee]

Didn't know that about mild steel v. stainless.

Throw a glasspack on the dart, good to go. I plan on making my own with a cherry bomb and aspec blast pipes.

gonna be sick.

[supers0nic]

probably the main reason why it'll be so expensive is because of shipping costs

shipping something like an exhaust will probably be 1/4 of the tag price

the exhaust sounds awesome on my stock KA and it does hang a bit low because of the resonator.

trust dd > dart

anyone can make a dart. its a simple straight pipe.....they sound like shit compared to the DD because they are made with stainless all around while the DD is mild steel. Mild steel resonates a lot better giving that deep tone while the dart sounds raspy and shit

my boy has a dart on his s13 and he would trade it for a DD any day

the part about shipping isnt true. most likely what will happen is that Trust JPN will make the exhaust and throw it on their containers to GReddy. So shipping would be no different.

[xplicit240]

i know how. it takes a certain amount to be ordered for them to get made. Greddy will not just make like ten. you would have to order like 50 or so.

[S.Milone]

I have a DD it is a great exhaust and has a good sound. Gives you extra clearance under the diff as well. I have been offered alot for it, so there are def people out there that still want it. Good luck with the sale.

[DailyDrift]

Also for the people who think $500 is too much, what do you guys a reasonable price would be?


I had a DD on my ae86 and you could hear me comming from 3 blocks away but it was still a bad ass catback... $400 shipped and ill take one. PM me.

[kuruptR]

i'd be interested for 200 bucks.

make it like dart izumi. 3in cat back and separate into dual pipes after the axle flange. no need for a muffler.

and who cares if it's made in japan? i mean, its a plus.. but 500 bucks because its made in japan by trust? who cares... its just a few sections of welded pipe...

Not to mention the dart is gay as fuck, Ill get a hillbilly to make one for me, if i ever wanted a nascar pipe.

[Sonic Motor]

i know how. it takes a certain amount to be ordered for them to get made. Greddy will not just make like ten. you would have to order like 50 or so.

Yup, it would have to be more than 10.

We are dealing with a manufacturer, not a small little shop that makes everything by hand.


Just wanna make sure this point gets across...
Trust DD is a discontinued exhaust.
Its an exhaust that is made for street and track.
Muffler that resonates sound, and silencer for the streets.

Dart Izumi and the other mufflers that were mention does not even compare...because those things are soooo loud, its not streetable here in LA.

Especially when cops are cracking down on people with modified exhausts.

ALSO ALSO ALSO....keep in mind that this is a service to the 240sx community...Gotta let us make SOME money right?

But thank you everyone for your interests, comments, and suggestions!

[EroGori]

$500 is too much. $400 and I would be interested.

[xplicit240]

DD is a nice ass exhaust man.

[Yuri]

If you managed to get this in production again, I would sell my Apex'i GTspec.

[jdFKNmVRT]

count me in...
let me know the details.

[916S14]

If you can get one for an ae86 i'll be interested, not for 500 though.

[weagle]

I'm one of those cheap ass s13 owners. I was wondering if I could get some more pictures. Especially of a car running it and that doesn't happen to be on a lift.

[Sonic Motor]

If you can get one for an ae86 i'll be interested, not for 500 though.


someone else already brought the 86 one back. Try go low ballin them on club4ag.

THIS IS ZILVIAAAA

[Sonic Motor]

I'm one of those cheap ass s13 owners. I was wondering if I could get some more pictures. Especially of a car running it and that doesn't happen to be on a lift.

i would...if I could.

Lets kindly ask one of these Trust DD owners on this forum to help us out shall we?

To all the nice people with a Trust DD on their S13, could you please help us take a video of your car with the exhaust on? Much rep and respect will be given to ya :)

[916S14]

someone else already brought the 86 one back. Try go low ballin them on club4ag.

THIS IS ZILVIAAAA

Way ahead of you. Seems no one really has one.

[ziptiedae86]

Way ahead of you. Seems no one really has one.
I got in on the last Club4AG groupbuy of the Trust DD two years ago. We had 50 buyers IIRC. I just sold my last new in box DD on Club4AG today.

Oh and we didn't get them for less than $500 brand new.

[overb0ost]

To all the nice people with a Trust DD on their S13, could you please help us take a video of your car with the exhaust on? Much rep and respect will be given to ya :)

i know you asked for an s13 vid but since no replies yet, heres mine on my s14.

completely stock KA

http://video.tinypic.com/player.php?v=2qv5lp0

[zavala]

i have a S13 and the Trust DD was the exhaust i wanted the most for the car. but it was so rare at the time and no one could get one that i ended up getting a blitz nur-spec. now don't get me wrong i love my blitz:rawk: i've had it on a few other cars in the past and it's always a good choice. i just really love the look of the sleek twin pipes and it just looks smaller in general compared to my nur-spec. if the price was decent and i could hear a sound clip of one on a modded SR, i might want to switch. just depends on the overall price i guess.

[916S14]

I got in on the last Club4AG groupbuy of the Trust DD two years ago. We had 50 buyers IIRC. I just sold my last new in box DD on Club4AG today.

Oh and we didn't get them for less than $500 brand new.

Awww alright thanks man. I googled some today and got knockoff ones for like 300. Probably rattles like a can though.

[daredevildoug]

I agree.

It's really hard to sell anything to S-Chassis guys brand new, unless it's cheap.

Because most of the new kids are cheap asses, and most of the old school guys have either:

A) Done cars

B) Big plans and don't roll with the fads.

The cheaper that you make it, the more people will buy it. That's obvious I know, but it's the rule of thumb when it comes to selling to the S-Chassis guys until they get real jobs.

I know I'm done tryin to make money off selling stuff to these kids now.


i second that... most new kids on the block are paying cheap to play the game. even over here we have so many low ballers. i consider that to be a reasonable price for a good exhaust system. i'd hit that up twice for my forty's.


-de

[Sonic Motor]

i know you asked for an s13 vid but since no replies yet, heres mine on my s14.

completely stock KA

http://video.tinypic.com/player.php?v=2qv5lp0

Sounds pretty good on KA! Thanks for the vid.

I heard it on my friend's hatch S13 before with SR.
ITs reeeeally quiet with the silencers on. And had a deep rumble like that S14.

I love the exhaust. :)

[xplicit240]

If you can get one for an ae86 i'll be interested, not for 500 though.

thats gonna be harder. greddy had them a few months ago. maybe Elite auto in NJ still has some. they bought alot of greddy parts for the 86 specially the coils.

[jrocslider]

if anything its this or a rein hard comin next summer

if u make it... you should be able to sell... to the people that are willin to pay

[Sonic Motor]

if anything its this or a rein hard comin next summer

if u make it... you should be able to sell... to the people that are willin to pay

im try to see who are those ppl that are willing to pay. So far, theres a few, but I'd like to see more.

[Kuzumi]

if they would be made without the muffler tip in the middle then i would buy them

[Full-Lock]

have you tried advertising this on some other sites?
people that arent on zilvia will also be interested

[Sonic Motor]

have you tried advertising this on some other sites?
people that arent on zilvia will also be interested

there are a hand full of 240 owners on zilvia. This place is probably the biggest S chassis owner's forum in the world.

If things dont get the thumbs up here, its probably not worth it to ask anywhere else.

[qt_240]

Man i remember when this was the exhaust everyone wanted...(including me) If you get the right people to rock these, the fanboys will follow. A buddy of mine had this exhaust back in the day, and it's def a nice sounding exhaust. Especially for the peeps that have to drive their cars everyday.

[swayray]

If you managed to get this in production again, I would sell my Apex'i GTspec.

darn... if I would've known you wanted a DD... i would've given you mine still in great condition for your yuri style cerberus wheels + cash you already sold... :-/

[240cracker]

out of curiosity, how are you bringing back a discontinued exhaust? Are you paying to have them re-make them?

ya seriously?

i dont care how u do it. i want one. PM sent.

[andmattsayd]

yeeah that price seems a little retarted
sorry no ones gonna buy a DD for 500
i can go get the same thing made for 150
sorrry just my own opinion

[boogerlovers]

it sounded really good on that KA...id buy one...:D

[origin_s135]

i would love to get my hands on the DD exhaust. that or the super made. :)

[Sonic Motor]

ya seriously?

i dont care how u do it. i want one. PM sent.

I got your PM, I dont have a trust DD, im trying to see how many ppl are interested so I can bring it. pretty funny how you really want one, and try to low ball me for something i dont have hahah...

[rps13 SR]

Ok, looking for some opinion from all you S13 owners!

Trying to see if it will be worth it to bring back the (discontinued)Trust DD catback exhaust.

Yup, might be able to bring the Trust DD without the Greddy/Trust name.
But still made by Trust, and made in Japan.

Looking at about $500 each (give or take) for brand new catback systems.

So whos interested?


For those who dont know, heres a pic:
http://img231.imageshack.us/img231/6291/73297486ov3.jpg (http://imageshack.us)

haha thats my friends car in the first pic.. his car is hot man I live that exhaust of his.
does he know your using his pic?

[Sonic Motor]

i googled it. No idea where it came from or whom to ask.

[s14kouki416]

if you bring it back for the s14, i will definitely buy one.

[Marc E Lawrence]

Have not seen a system I like so I just had a 3 inch system built with Magnaflow high flow cat and muffler with dual stainless tips, installed with tax $410 out the door. Love it. Not mandrel bent, aluminized pipe and muffler. Looks great, sounds and performs very well. Pacific Muffler, Stockton, Ca. - Thanks guys great work.

[Sonic Motor]

Have not seen a system I like so I just had a 3 inch system built with Magnaflow high flow cat and muffler with dual stainless tips, installed with tax $410 out the door. Love it. Not mandrel bent, aluminized pipe and muffler. Looks great, sounds and performs very well. Pacific Muffler, Stockton, Ca. - Thanks guys great work.

yeah, ive seen a similar setup locally on someone's RHD sil80. It was hella loud though. I guess he didnt have a muffler.

Wow $410? thats expensive.

See you guys? Even if you try to build your own, its gonna cost more than $400.
For $500, its already a GREAT deal.

Now whos interested?

[Phlip]

Have not seen a system I like so I just had a 3 inch system built with Magnaflow high flow cat and muffler with dual stainless tips, installed with tax $410 out the door. Love it. Not mandrel bent, aluminized pipe and muffler. Looks great, sounds and performs very well. Pacific Muffler, Stockton, Ca. - Thanks guys great work.

It is funny you titled your post "exhaust system ripoffs," then described a crush-bent system that you paid over $400.00 for.
In this case, YOU are the one who got ripped off.

[Marc E Lawrence]

No cat, no installation, just a muffler and some pipe for $500 - Probably will cost a $100 to have it installed. Maybe I'm missing something here? Good luck hope you sell alot of your systems.

[Phlip]

No cat, no installation, just a muffler and some pipe for $500 - Probably will cost a $100 to have it installed. Maybe I'm missing something here? Good luck hope you sell alot of your systems.

For a mandrel bent system made of stainless and not muffler shop mild steel?
And why on earth would someone need "installation" for a bolt-on exhaust system?
Including a cat (or test pipe), welding and all that goodness, $410 for a custom exhaust is a ripoff.
I will thank you to stop shitting on this man's thread now.

I am not asking.

[DOOK]

410 for a "custom" exhaust shop special is complete garbage... shouldn't pay more than 200 including the price of a muffler and new flex pipe... this exhaust is well worth 500 if you're serious and wanting good stuff. I'm out of the S chassis game for a while though.

[ROUGE180]

Id rock it for sure. Sounds nice on the KA. I did a crazy search on Japanese search engines, Australian search engines and UK search engines cuz US sites kept giving me the same links. There isn't much information listed. Just a couple people who have them on their cars but no vids or pics installed on an s13. There a couple vids including the one on the KA. I found a skyline and a hachi.

The skyline vid is cool though.. Nice and angry barry white sounding lol well if he tried to sound hi pitched lol

http://www.youtube.com/watch?v=G4Y1SDSKmsA

The Trust DD sounds more throaty than the Apex dual N1 imo

http://www.youtube.com/watch?v=gT7-K0_kRPA


RMS
http://www.rmsmotorparts.com.au/images/Brands/TRUST/exhaust/tr_dd/dd_Muff340.jpg (http://www.rmsmotorparts.com.au/images/Brands/TRUST/exhaust/tr_dd/dd_Muff340.jpg)

http://www.rmsmotorparts.com.au/images/Brands/TRUST/exhaust/tr_dd/dd_im.jpg
^^^^
This is all rms had to say about it. I think its a bad Japanese to English translation:
"
Substantial improvement of exhaust efficiency 90 phi, the large aperture pipe 102 phi dual conversion, it guarantees exhaust flows. In addition, it corresponds to the sport scene of circuit travelling and drift travelling etc., the silencer with the tail guarantees the road clearance of arrangement and the machine rear section to the center section immediately after the catalyst.
::It guarantees the roadspace (90mm) of safety standards
::The silencer to the tail pipe - by installing, it guarantees safety standards (below approach noise 103db)
::Tail silencer"

Not sure what "phi" means.

From what I could see even for used Trust DD the prices were between $680 to $550 so to get it on here brand new in a box for $500 is pretty good. Maybe if it was around $450 more people would want to purchase? I dunno Not all Zilvians are low ballers and cheapies. Quality versus low cost. You get what you pay for.

[djj067]

count me in.

[Sonic Motor]

thanks for posting all that Rouge180

[nwmrkt]

hmmm, is this still might be going on? Im interested in s14.

[bziggers13]

hm.. buddy club is almost the same thing, isn't it?

or does the greddy have a resonator??

[nwmrkt]

the trust dd has a muffler if im correct. Its in line down furthur. You can see it in the picture, first post.

[forrory]

I'd buy one.

[DavidC]

so any one in maryland want a DD exhaust right now? i've got one in my basement
silencers and all
good condition
$500 come and get it.
i do not want to ship

[kouness]

i think if you first offered the exhaust priced at $600. everyone would lowball you and offer $500. thats when you say that you have to work it out with trust.. and with a couple days of making them wait.. you can say you worked out a deal and got $500, but need xx amount of orders.. thats when everyone will begging at your feet to let them in on it... hahaha.. just a thought

[Sonic Motor]

it doesnt look like its happening.

Not enough interest....sigh.

[emersonLP]

Did you start a group buy? Maybe you could get together enough people that way. So you have people confirmed and committed to actually following through. Also, do the s14 DD... I want!

[nwmrkt]

im interested, I don't even mind the price either.

[hey808]

it doesnt look like its happening.

Not enough interest....sigh.

Seriously? I'm down for one at $500 if it's possible. Man, what a cool exhaust...

[4DOOR_LIFE]

I would be interested in one for an s13. My girl has been wanting one for her 240 since she saw it on my ae86 a couple of years ago. So have you checked exactly how many people would be interested??

[Timeattack]

That looks very nice but a little bit pricy

[vodka2]

so many cheap fucks on here.. 500$ for a well made exhaust is great...
if you put buddy club and trust in the same category ... your smoking crack.
if you get the s13 group buy im in.

[nwmrkt]

so many cheap fucks on here.. 500$ for a well made exhaust is great...
if you put buddy club and trust in the same category ... your smoking crack.
if you get the s13 group buy im in.
yeah but s14 for me

[DohcKA]

i want some dd's for my coupe... i want dd's for my ae86 tooo... wassup with it

[trogdor]

3/4 of these people who say they're going to buy one, aren't.

cool exhaust but it's a waste of money in my opinion just to be exclusive.

[DohcKA]

i'd pay 500 for an exhaust anyday... i dont mess with the fake shit... you get what you pay for....BRING EM BACK

[JohnD1079]

Why dont you start up a list of people who are seriously interested?

Have like 3 sections in the list like :serious, maybe, and people who would get it for a lower price. How many do you need in order to get them produced? Not like im going to get it, im just throwing the idea out there.

Even with the people on the list, half are going to be flakers.