PDA

View Full Version : Where to get bush socket and wave washer


cronux
11-30-2007, 07:28 AM
http://www.pdm-racing.com/installs/sshifterhelp/img008.jpg

so anyways, the bush socket and the wave washer werent included with my transmission, and i neeed them to install a c's style shifter... soo, where in the world could i get one, (closest nissan dealership is litteraly 2 hours away. ) and i havent had any luck online.

UNISA JECS
11-30-2007, 07:39 AM
Unless found on hereI think the dealership is gonna be your best bet, I can give you the part number to the parts you need;

32870-V5003 -Control Lever Socket Asssembly

It consist of the following:
1)Control Lever Spring (wave washer)
2)Control Arm and pin (bush socket)

***does your shifter still have the little white bushing on the end of it becasue you need that also, if not lmk I'll give you the part number for it.

cronux
11-30-2007, 07:40 AM
still have the white bushing, so thats all good. i just needed a lead on the bush socket and wave washer, thanks very much.

unicoladron
11-30-2007, 07:40 AM
you may want to look into the 300zx parts, i'm not saying it's the same shit, but it'll be worth looking into given your situation.

UNISA JECS
11-30-2007, 07:48 AM
You can find these same exact parts in the following vehicles:

S12 200SX ALL
S13 240SX ALL
S14 240SX ALL
Z31 300Z 05-86 - thru
D21 Hardbody
D22 Frontier
R50 Pathfinder
WD21 Pathfinder 07/86 - 08/89
WD22 Xterra

I just listed a few models and years not all but in any of those above cars/trucks you can find what you need.

UNISA JECS
11-30-2007, 07:49 AM
you may want to look into the 300zx parts, i'm not saying it's the same shit, but it'll be worth looking into given your situation.

I just checked Z32 300ZX does not crossover but the Z31 300Z does for ALL years for the above parts.

cronux
11-30-2007, 07:56 AM
so if i hit up a junkyard for a manual transmission of any of the above listed cars, and rob it, it'l fit right in?

UNISA JECS
11-30-2007, 08:08 AM
so if i hit up a junkyard for a manual transmission of any of the above listed cars, and rob it, it'l fit right in?

Any of these listed below has teh same exact part:

http://i167.photobucket.com/albums/u159/zilvia_album/SP32-20071130-070502.gif

http://i167.photobucket.com/albums/u159/zilvia_album/SP32-20071130-070510.gif

unicoladron
11-30-2007, 08:14 AM
I just checked Z32 300ZX does not crossover but the Z31 300Z does for ALL years for the above parts.

shit...it was a good guess tho, only one generation off. thanks for correcting instead of flaming lol

bloodangels13
11-30-2007, 08:51 AM
my suggestion is sell the c's shifter and go and order a B&M short shifter ... i had a C's and the B&M is soooo much nicer C's would pull out of the trans on real hard driving... with it properly installed... plus B&M has a lifetime warrenty nuff said

projectRDM
11-30-2007, 09:26 AM
I've got all those pieces you need but I can't ship until Monday. PM me if you're interested.

cronux
11-30-2007, 09:43 AM
imma hit up the local junkyard, bound to have one there, no 240s, but chances are somethign is there. i'll let you know later if i need it, thanks tho,