PDA

View Full Version : Request: Pic of KA24DE throttle cable pulley


Neejay
11-26-2007, 02:48 AM
I REALLY need a picture of the KA24DE throttle cable pulley setup. I disassembled mine when taking off my intake manifold (don't ask) and now I can't seem to get it back together correctly. I couldn't find a picture when searching (good and 2 other forums) nor in the FSM.

mugendork
11-26-2007, 03:16 AM
pm sent brotha

Neejay
11-26-2007, 03:20 AM
pm sent brothareplied back. I hope it works, as I am using a unlocked AT&T phone with T-mobile...heh. I've been having some problems with it.

Tommy P
11-26-2007, 03:54 AM
Im pretty sure I have a throttle body for a ka24de I would sell you for like $10+shipping if you end up needing it

Neejay
11-26-2007, 04:03 AM
I don't need a throttle body, I just need the throttle cable pulley diagram. The spring setup.

projectRDM
11-26-2007, 08:01 AM
You can swing by and look at one if you need to, I've got a couple.

Neejay
11-26-2007, 05:55 PM
You can swing by and look at one if you need to, I've got a couple.Looks like I might have to do that. I'll let you know before I do.

In the mean time, no one can take a detailed, up close pic of theirs for me? :(

UNISA JECS
11-26-2007, 05:58 PM
I REALLY need a picture of the KA24DE throttle cable pulley setup. I disassembled mine when taking off my intake manifold (don't ask) and now I can't seem to get it back together correctly. I couldn't find a picture when searching (good and 2 other forums) nor in the FSM.

I just disasembled and put mine back together the other day, lemme see if I can fidn a pic for you.

Pank
11-26-2007, 05:59 PM
if theres not one posted by the time i get home, i'll take a picture of mine for you

UNISA JECS
11-26-2007, 06:03 PM
http://i167.photobucket.com/albums/u159/zilvia_album/KA24DET%20BUILD/PictureorVideo011.jpg

http://i167.photobucket.com/albums/u159/zilvia_album/KA24DET%20BUILD/PictureorVideo011.jpg

burnsauto
11-26-2007, 06:07 PM
http://aycu09.webshots.com/image/35568/2002994971422420924_rs.jpg (http://allyoucanupload.webshots.com/v/2002994971422420924)

UNISA JECS
11-26-2007, 06:11 PM
When you put the two green springs and the stainless spring back pay attention to how one side is hooked in a circle fashion and the other end is not so circular, the circular hooked side goes around the post.

http://i167.photobucket.com/albums/u159/zilvia_album/KA24DET%20BUILD/PictureorVideo014.jpg


http://i167.photobucket.com/albums/u159/zilvia_album/KA24DET%20BUILD/PictureorVideo014.jpg
http://i167.photobucket.com/albums/u159/zilvia_album/KA24DET%20BUILD/PictureorVideo016.jpg

Neejay
11-26-2007, 10:34 PM
UNISA JECS and burnsauto, THANKS A LOT! I brought the intake manifold inside, so I was able to attach it based on both of your pics.

importdude
11-27-2007, 01:41 AM
is that setscrew spose to be completely bottomed out like that to close the TB?

Neejay
11-27-2007, 10:05 PM
is that setscrew spose to be completely bottomed out like that to close the TB?Not sure, I know it has something to do with idle though.

UNISA JECS
11-27-2007, 10:26 PM
That screw has more to do with throttle plate sticking more than anything else, you want taht screw to just barely ever so lightly to keep the throttle plate from sticking inside the bore, somehting like on the order of a hair's width like .01" very very small or else you'll get a shitty idle.

Neejay
11-27-2007, 10:29 PM
That screw has more to do with throttle plate sticking more than anything else, you want taht screw to just barely ever so lightly to keep the throttle plate from sticking inside the bore, somehting like on the order of a hair's width like .01" very very small or else you'll get a shitty idle.
Ah, ok. Thanks for the clarification.