stock vlsd clunking?

[importdude]

i have a 95 zenki with stock lsd,

i just got the car running (first 240 with lsd)
when i move out of 1st gear the rear end clunks alittle, feels like running over little rocks...

is this normal?
friend told me there was a bushing or something that cuases that (he read it on here)

thx

[fliprayzin240sx]

subframe bushings...get some collars and install them...

[swiftdrift]

subframe bushings...get some collars and install them...

spoken for the truff.... same thing happened when i had my old 14

idk bout collars, but def replace the bushings

[!Zar!]

Get the subframe collars from splparts.com

[OMGYO]

I have that in my 300zx, even with the solid subframe bushings and solid tranny bushings in. Im just guessing that because its a vlsd, the oil is cold or something...causing the vlsd to slip all wierd in the beginning
i may be pulling it out of my ass, but thats what i think LOL

[Ninjabread]

I get a clunk when I'm at low rpm's if i give it a quick shot of gas and let off, feels like its rocking back and forth clunking.

Think my diff is just typical 150k diff. Old and worn.

*edit: oh and i have solid subframe bushings. so its not that. I jacked up the car and the play is IN the diff.

[sik.infinity]

yup thats the subframe clunking...........time to get some collars

[importdude]

already have spl subframe collers

[buzzfast]

check your tranny mount

[importdude]

will do, suppositly it was new,

i was thinking mabe it was the clutch
spec stag 3 6puck solid,

when i slip it with more rpm, it doesnt do it

[Ninjabread]

check your tranny mount


Yea mine is toast... I have a nismo to replace it.

[importdude]

:(
i noticed when/if i rev higher and then slip it
there is no clunk/wobble
gonna check it tomaro:(

[importdude]

found out there was one loose subframe bolt

tightend that up and thought i would be clunk free

but its still there
little less, but still there!