PDA

View Full Version : The NEW 240sx Bible (Vol. 2, Unifinished)


hijack3d
11-21-2007, 06:48 PM
So, I’ve been a member of Zilvia (on other screen names that I’ve managed to lock myself out of) for years and have never really bothered to post anything until now-ish. But I’ve been collecting information and crap I thought was interesting for years… I did a “select all” for my bookmarked links and found out I have over 500 links related to aftermarket mods and Nissan stuff. So I decided that I’m going to organize them a little, and contribute my “findings” to Zilvia and the rest of the world…

Added 12/03/07:
I know this is a lot! So to help you search for whatever you need (assuming you weren't brought here by a search engine!), you can pres CTRL+F and type in ONE KEY WORD related to what you're searching for. Then click "Find next." For example, if you're looking for an RB20 X-reference list, just hit CTRL+F and type in RB20...I know you may have to hit Find Next a lot, but at least (hopefully) you'll find what you're looking for! This is the same shortcut for Mozilla Firefox and Internet Explorer.

I know that there’s already The Ultimate 240sx Bible Volume 1 (http://www.240sxforums.com/forums/showthread.php?t=85222) out there, so I figured this could kind-of be an expansion that. “The New Testament/Vol 2.”

Please feel free to contribute! I will update this post as frequently as I can! Also, I know some of these links can be put under different categories… This is just how most of them are categorized on my computer. I’m also obviously not listing every link I have… just the ones I think might be of interest. If there’s something you absolutely can’t find, I’ll see if I have a link on it.

Factory Service Manuals/ ECU Pinouts/ Noob Links
Torque Specs? Wondering how those hoses route? How to take something apart?
Nicoclub.com’s Factory Service Manuals (http://www.nicoclub.com/FSM/)
ECU Pinout Database (http://www.plxdevices.com/ecudatabase.htm)
KA ECU Glossary (http://eccs.hybridka.com/viewtopic.php?t=207)
ECU Reset, Location, and Codes (http://www.zilvia.net/f/showthread.php?t=10007)
Chassis Codes, USDM/Europe (http://www.240sxforums.com/forums/showthread.php?t=57038)
240sx/180sx/Silvia Recognition (http://www.240sxforums.com/forums/showthread.php?t=1931)
Standard Tire Size 240sx (http://forums2.freshalloy.com/showthread.php?t=26460)
Intro to the 240sx (http://forums.nicoclub.com/zerothread/183490)

Suspension Definitions, Some Specs, & Tuning Theories
What’s an anti-roll/sway bar? (http://www.turnfast.com/tech_handling/handling_antiroll.shtml)
Sway my Way (http://www.whiteline.com.au/articles/ZM_92_Swaybars_1.htm)
Basics on sway bar designs and sway bar “tuning”
Handling Tuning Table (http://www.turnfast.com/tech_handling/handling_tuningtable.shtml)
Getting into Coilovers (http://www.whiteline.com.au/articles/coilover_H4s_2000a.htm)
“The pros and cons of height adjustable spring and shock systems” – Taken from Whiteline (http://www.whiteline.com.au)
Lowering Springs – “How low can you go?” (http://www.whiteline.com.au/articles/skidmarks4a.htm)
Suspension Sense (http://www.whiteline.com.au/articles/skidmarks1a.htm)
What’s good handling?
Is a Strut Bar Really Needed? (http://e30m3performance.com/myths/Strutbar_Theory/strut_bar_theory.htm)
Suspension Mods – Value for the Money Equation (http://www.whiteline.com.au/default.asp?page=/reviews03.htm)****
Suspension Definitions (http://www.nicoclub.com/articles.php?id=168586)
Zilvia’s Suspension FAQ (http://www.zilvia.net/f/showthread.php?t=115916)*****
Spring Rate Archive (http://www.zilvia.net/f/showthread.php?t=7590)
Defining Camber, Caster, Toe, and Understeer/Oversteer (http://www.240sxforums.com/forums/showthread.php?t=69666)
Suspension Setup 101 (http://www.zilvia.net/f/showthread.php?t=8469)
All you ever wanted to know about Differentials (http://forums.nicoclub.com/zerothread/160237)
How Differentials Work (http://auto.howstuffworks.com/differential.htm)
Wiki Differential (http://en.wikipedia.org/wiki/Differential_%28mechanical_device%29)
1-way, 1.5-way, 2-way…What does it mean? (http://www.club4ag.com/faq%20and%20tech_pages/limited_slips_differential_101.htm)
Differential Definitions and Diff Fluid (http://www.musclecarclub.com/library/tech/differential.shtml)
HybridZ’s Diff FAQ (http://forums.hybridz.org/showthread.php?p=700184) *****
LSD types Info (http://www.zilvia.net/f/showthread.php?t=38598)
Alignment Basics (http://www.discounttiredirect.com/direct/brochure/info/tmpInfoAlignment.jsp)
Ziptied’s Alignment for Dummies (http://www.ziptied.com/?cat=2)

Sport Compact Car’s Specs on Nissan 240sx pulling 1G on the skid pad:

Front:
6kg/mm (335lb/in) JIC FLT-A2, setting #2
27mm Whiteline full stiff
-2.5 degrees camber/ 0 toe
225/45ZR-17 Falken Azenis Sport 34 psi
Rear:
5kg/mm (279 lb/in) JIC FLT-A2, setting #2
20mm Whiteline, full soft
-1.5 degrees camber/ 1/8-inch toe in
225/45ZR-17 Falken Azenis Sport 37psi

Tires & Wheels
Discount Tire Explains Tire Pressure (http://www.discounttiredirect.com/direct/brochure/info/tmpInfoAirPressure.jsp;jsessionid=sqhLHCyX1j1Y1kG2 PKLwhHhFQ9bxH8zvwyB9b10HTRTDpzTQWLQHNJhPx9QRwkgxbm PRcXgfhTkYgWhgbZ7TpJChkZpBWvhV4J2J2td1p4KFLvThwp1T nTTXmZFsT3z7%21-1995652644%211674760677)
SCC’s Tire Pressure Guide (http://www.sportcompactcarweb.com/tech/0208scc_tire_pressure_guide/index.html) (Also includes how to read a sidewall)
Balancing Tires (http://www.discounttiredirect.com/direct/brochure/info/tmpInfoBalancing.jsp)
How tires are measured/rated (http://www.zilvia.net/f/showthread.php?t=11794)
Tire Size Calculator (http://www.zilvia.net/f/showthread.php?t=16468)
Discount Tire’s Tech Section (http://www.discounttiredirect.com/direct/brochure/info/tmpInfoCenter.jsp?)
Offset (http://www.zilvia.net/f/showthread.php?t=8338)
Tires and Drifting (http://www.nissanperformancemag.com/july06/drift_angle/)*****
Tire Pressure Setting, Drifting Theories (http://www.jdm-option.com/eng/feature/05_08/evolution.html)
What kind of Wheels do you Have? (http://forums2.freshalloy.com/showthread.php?t=26587)
Wheels that Clear Z Brakes (http://forums.nicoclub.com/zerothread/223218)****

Chassis (Suspension, Brakes, and Drivetrain) Mods for your Nissan
Springs and Shocks Install (http://www.nissanperformancemag.com/february02/240suspension.shtml)
Tie Rod (Inner/Outer) Install (http://www.ziptied.com/?p=22)
Traction and Toe Arms Install (http://www.ziptied.com/?p=18)
T/C Rods Install (http://www.ziptied.com/?p=17)
What’s included in the stock Damper Systems? (http://forums2.freshalloy.com/showthread.php?t=26619)
Coilover Install in S14 (http://www.nicoclub.com/articles.php?id=225219)
Instailling Z32 Uprights (http://www.nicoclub.com/articles.php?id=231941)
Aftermarket Diff Install (http://www.nicoclub.com/articles.php?id=217546)
S13 Diff Options (http://www.zilvia.net/f/showthread.php?t=53768)
S15 Diff Install (http://www.nicoclub.com/articles.php?id=245575)
Diff Swaps for the 240sx (http://www.nicoclub.com/articles.php?id=168561) Wiki Suspension & Brake Modification (http://en.wikibooks.org/wiki/Nissan_240SX_Performance_Modification#Suspension_a nd_Brake_Modification)
5-lug conversion/Z32 Brake Swap Ultimate! Includes E-Brake Install (http://importnut.net/300zxbrakeswap.htm#5-lug)*****
Rebuild Z32 Rear Calipers (http://forums2.freshalloy.com/showthread.php?t=120108)
About Brake Bias and Big Brakes (http://forums2.freshalloy.com/showthread.php?t=94734)
Everything you could want to know about Brake Upgrades (http://en.wikibooks.org/wiki/Nissan_240SX_Performance_Modification/Brakes)*****
How to Bleed Brakes (http://www.zilvia.net/f/showthread.php?t=17662)
Weight Reduction (http://en.wikibooks.org/wiki/Nissan_240SX_Performance_Modification/Weight_Reduction)
Clutch/Flywheel Install Checklist (http://www.zilvia.net/f/showthread.php?t=97080&highlight=flywheel)
How do you know when your clutch is going? (http://www.zilvia.net/f/showthread.php?t=7202)
Aluminum Flywheel? (http://www.zilvia.net/f/showthread.php?t=31741&highlight=flywheel)
White Bunny Clutch Set Up (http://forums.nicoclub.com/zerothread/227129)
How a Lightweight Flywheel Works (http://www.uucmotorwerks.com/flywheel/how_a_lightweight_flywheel_works.htm)
Effects of a lightweight flywheel (http://www.zilvia.net/f/showthread.php?t=8339)
KA24DE vs KA24E flywheel (http://forums2.freshalloy.com/showthread.php?t=26600)
Chassis Stiffening Foam Result (http://forums2.freshalloy.com/showthread.php?t=162693)
Driveshaft Lengths (http://forums2.freshalloy.com/showthread.php?t=52055)
Driveshaft Differences (http://forums2.freshalloy.com/showthread.php?t=49477)
Auto to Manual Conversion S13 (http://www.nicoclub.com/articles.php?id=183606)
Auto to Manual Conversion S14 (http://www.zilvia.net/f/showthread.php?t=154480)
Slave Cylinder Problems (http://forums2.freshalloy.com/showthread.php?t=26608)

BRAKE BREAKTHROUGH:!!!!

FOR YOU GUYS WANTING TO UPGRADE YOUR BRAKES, I HAVE FOUND A NEW SETUP THAT IS EXTREMELY CHEAP AND WORKS GREAT!!!

We all know about J-30 front rotors and calipers. Big woop. IBut what about the rear???? Nope, nope, dont go to the junkyard and buy the entire spindle from a 300Z only to add weight to your car for a parking brake, I have a way to fit the J30 rear rotors to the 240SX and still retain the stock parking brake system.

The story is, I purchased the J30 front calipers and rotors last week for my 240 (to the new guys, this is another car, not the one with the VQ). I redrilled the rotors for the 4 lug pattern and installed them to my car......cool. But the rears needed upgrading as well. So back to the junkyard I go.
I wanted to use the J30 rear rotors because they are vented and about 2" larger than the stock 240sx solid rear rotors. I know that the rear caliper bracket bolts directly to the 240sx and has the correct offest for the J30 rotor. What I didnt like was the loss of use of my parking brake cable....most people swap the entire rear 300z/J30 setup to get the drum style parking brake. This weighs too much and though it does lock better, its overkill for what Im building. So here I sit, in Pull-A-Part with a 240 (1990) infront of me, three of the four lugs knocked out, the 5 lug rotor on the 240 (from the J), the caliper bracket from the J30 and no caliper to use that has the parking brake function. I rumaged through the parts yard for 3 HOURS looking at different calipers and finaly came up with a combination that works.

Rear J30 Rotors drilled to a 4 lug pattern
Rear J30 Caliper Brackets
Rear 1991 Maxima Calipers
Rear 1989 Maxima Parking Brake Cable Cam (spring loaded on caliper)
Rear J30 Brake Linings (Pads)

To make it all work, I drilled out the slide pin runs on the J30 caliper brackets with a 25/64 drill bit (I think, I may be wrong...10.5mm is the target here). This allowed for the slide pins from the 240sx caliper brackets to be used (the 240sx/maxima uses two 14mm bolts, bolting through the caliper to the slide pins where the J30 uses a slide pin that threads into the caliper...just trust me, they arent compatible). After that was done, the calipers (MAX) need to be correct for the parking brake cable. The origional parking brake cable cam is positioned the wrong way on the caliper. I replaced those with the ones from the older max that can be used with our cables (the newer ones use a eyelet style were ares attach like a throttle cable). By changing that cam, I can hook up our cable to the caliper. The left rear Max caliper is used on the right rear of the 240 and the left rear 240sx parking brake cable bracket (protruding from the caliper) is used on the now right rear caliper (max). The cable wraps around the parking brake cam after its all installed, but its doesnt affect operation much. Now that you have your Maxima calipers on your J30 caliper brackets with the older style Maxima parking brake cams, you can bolt all this to the spindle of the 240sx and WHALAH, big brake upgrade for the rear of your 240 and still maintain the stock cable system.

--Original Thread Here: VQ35DE in S13 (http://forums.nicoclub.com/zerothread?id=207033)

Electrical/Stereo
Altima Fan Wiring Guide (http://forums2.freshalloy.com/showthread.php?t=155414)
Altima Fan Install (http://forums.nicoclub.com/zerothread?id=219127)
DIY Grounding Kit (http://www.nicoclub.com/articles.php?id=216236)
Checking the Ground (http://www.nicoclub.com/articles.php?id=159907)
Understanding Relays (http://www.autoshop101.com/forms/hweb2.pdf)
Auto Relays 101 (http://www.the12volt.com/relays/relays.asp)
Wiring Guide (http://www.skingco.com/portable_power/wiring_size_chart.htm)
Wire tuck when lowered (http://www.ohiodrifting.com/forum/viewtopic.php?p=80202&sid=1d636db33c6e0b2cdf1e020d50924e5b)
Repairing Power Window Amp
(http://forums.nicoclub.com/zerothread/245266)Power Window Tutorial (http://forums.nicoclub.com/zerothread/256110)
Using Quest Alternator; 80amp to 110amp (http://forums.nicoclub.com/zerothread?id=131961)
Rear Factory Amp Bypass S13 (http://forums.nicoclub.com/zerothread?id=52883)
Bypassing factory amps S14 (http://www.240sx.org/faq/articles/stereo_bypass_amps.htm)

Exterior
S14B to S14A or S15 Conversion (http://www.240sxforums.com/forums/showthread.php?t=560)
95/96 to 97/98 (http://www.240sxforums.com/forums/showthread.php?t=5406)
Better Silvia Headlights (http://forums2.freshalloy.com/showthread.php?t=71884)
About Sideskirts (http://www.zilvia.net/f/showthread.php?t=133688)
Sealing leaky tail lamps (http://www.zilvia.net/f/showthread.php?t=103050)
Home depot lip (http://www.zilvia.net/f/showthread.php?t=165108)
Body Kits (http://www.zilvia.net/f/showthread.php?t=8923)
S14A Refurb. (http://www.sxoc.com/vbb/showthread.php?t=283826)*****
How to: Rust Removal (http://www.floridacarclub.com/showthread.php?t=3133) (Pics don't work)
SEM Rust Mort Tech Sheet (http://www.sem.ws/tech_sheet/RM%20TDS.pdf)

Interior
Door Panel Cover Removal (http://forums.nicoclub.com/zerothread/253736)
Car interior budget restoration (http://www.allpar.com/fix/holler/inside-secrets.html)
Cleaning a dirty headliner (http://www.allpar.com/fix/holler/headliner.html)
Installing Digital Climate Control (http://www.240sxforums.com/forums/showthread.php?t=5068)
Converting 180km/h speedo to 180mph (http://forums2.freshalloy.com/showthread.php?t=111713)
Fix Busted HUD (http://www.ziptied.com/?p=14)
Installing Quick Release Hub (http://www.zilvia.net/f/showthread.php?t=121127)
Bypassing Factory Amps (http://www.zilvia.net/f/showthread.php?t=10025)
Fixing Sunroof Whistle (http://www.zilvia.net/f/showpost.php?p=374809&postcount=5)
Aftermarket Seats for S13 (http://forums2.freshalloy.com/showthread.php?t=26269)
Modifying S13 Seats (http://www.240sx.org/links/installs/gripseat/seats.htm)
Dash Removal (http://forums.nicoclub.com/zerothread/228752)
Custom Fiberglass (http://forums.nicoclub.com/zerothread?id=52048)
Custom Center Console (http://www.zilvia.net/f/showthread.php?p=1638584#post1638584)



Turbos and Turbocharging Theories
Bar to PSI (http://www.240sxforums.com/forums/showthread.php?t=48280)
Selecting a Turbocharger (http://www.bentleypublishers.com/gallery.htm?code=GTUR&galleryId=805)
What’s Needed to Turbocharge? (http://www.nissanperformancemag.com/columns/nerds/)*****
Understanding turbos/twin turbos (http://forums.gtrcanada.com/showthread.php?t=13657)
Turbo Rebirth (Shows Porting Wastegate to prevent boost creep) (http://www.allpar.com/fix/holler/turbo-rebirth.html) *****


Engine & Engine Bay Mods
Recirc. Blitz BOV (http://www.zilvia.net/f/showthread.php?t=27596)
Exhaust Pipe Diameter (http://forums2.freshalloy.com/showthread.php?t=26266)
S14 Electric Fan Install (http://www.240sx.org/links/installs/efans/index.html)
Throttle Tightening (http://www.zilvia.net/f/showthread.php?t=17903)
S13 Cam Alignment (http://forums.nicoclub.com/zerothread/62997)
Headwork 101 (http://www.nissanperformancemag.com/december03/nerds/)
Headwork 102 (http://www.nissanperformancemag.com/december02/nerds/)
Timing Chain Rattle? (http://www.nicoclub.com/articles.php?id=105618)
Replacing Timing Chain (http://www.nicoclub.com/articles.php?id=161703)
Fuel & Engine Bible (http://www.carbibles.com/fuel_engine_bible.html)
Engine Oils (http://www.dirtroadmagazine.com/oil2.htm)
The Bottom End Tech (http://www.nissanperformancemag.com/february04/nerds/)
Setting/Adusting Idle (http://forums.nicoclub.com/zerothread/254123)
Stalling at Stop Lights (http://forums.nicoclub.com/zerothread?id=254278)


(Air/)Fuel & Performance Theories
How does a bigger MAF make sense? (http://forums2.freshalloy.com/showthread.php?t=78132)
MAF to MAP (http://eccs.hybridka.com/viewtopic.php?t=358)****
Cleaning the MAF (http://forums.gtrcanada.com/showthread.php?t=16570)
Fuel Filter Replacement (http://forums.nicoclub.com/zerothread/160213)
Fuel Pressure Regulator (http://forums.nicoclub.com/zerothread/160216)
Fuel Pump Kill switch (http://forums.nicoclub.com/zerothread/215861)
S14 fuel pump install (http://www.turbo240.com/forums/viewtopic.php?t=507)
S13 Fuel Pump Install (http://www.turbo240.com/forums/viewtopic.php?t=508)
Injector Resistor Pack Install (http://www.turbo240.com/forums/viewtopic.php?t=510)
Head work, is it worth it? (http://forums2.freshalloy.com/showthread.php?t=26634)
Basic EFI Theory (http://sdsefi.com/techtheo.htm)***** (LONG)
Exhaust Theory (http://www.geocities.com/MotorCity/7177/exhausttheory.html)
How Headers Work Part I (http://www.nissanperformancemag.com/november02/nerds/)
How Headers Work Part II (http://www.nissanperformancemag.com/december02/nerds/)
Tuning for E85 (http://eccs.hybridka.com/viewtopic.php?t=78)


Tuning
Tuning for Newbies (http://www.ka-t.org/forums/viewtopic.php?t=29139)
GReddy Profec B (http://forums2.freshalloy.com/showthread.php?t=86895)
Ultimate SAFC guide (http://www.ka-t.org/forums/viewtopic.php?t=8089)
How SAFC works part one (http://www.turbo240.com/forums/viewtopic.php?t=18)
How SAFC works part two (http://www.turbo240.com/forums/viewtopic.php?t=31)
Calum/Calum RT Discussion (http://www.ka-t.org/forums/viewtopic.php?t=26876)
Tuning Nissan’s ECU’s Tutorial (http://eccs.hybridka.com/viewtopic.php?t=47)
Basics of Engine Management (http://eccs.hybridka.com/viewtopic.php?t=152)
Tuning Made Simple (http://eccs.hybridka.com/viewtopic.php?t=131)

Swaps/Engine SpecificProblems
All Engine Swap Information (http://www.240sxforums.com/forums/showthread.php?t=55363)


KA
Engine Idle Problem (http://forums2.freshalloy.com/showthread.php?t=26606)
SOHC repair/tune up guidelines (http://forums2.freshalloy.com/showthread.php?t=26632)
What can my KA-T Handle in Stock Form? (http://forums.nicoclub.com/zerothread/226410)
DOHC for dummies (http://www.ka-t.org/forums/viewtopic.php?t=6263)
6 Speed KA Project (http://www.ka-t.org/forums/viewtopic.php?t=27570)
KA-T Huge List of Everything You Need to Know (http://forums.nicoclub.com/zerothread/99647)
Running CBR Coils (http://www.ka-t.org/forums/viewtopic.php?t=23985)
OBD1 KA Tunes Hosted (http://www.ka-t.org/forums/viewtopic.php?t=28671)
Running LS1 Coils (http://www.ka-t.org/forums/viewtopic.php?t=26234)
ARP Main Studs and Head Studs Install (http://www.jgsturbo.com/arptrq.html)
Oil Drain Instructions (http://www.jgsturbo.com/dlinst.jpg)
Oil Feed Instructions (http://www.jgsturbo.com/Backup_of_oillineinstructions.jpg)


RB
RB25 Swap Instructions (http://forums.nicoclub.com/zerothread?id=74575)
GTR Basics (http://forums.gtrcanada.com/showthread.php?t=11578)
GTR Info (awesome) (http://tyndago.googlepages.com/)
Racebread’s Files (http://www.racebread.com/old/files.html)
Collected info on RB20 into S13 (http://forums.nicoclub.com/zerothread?id=92829)
RB ECU Diagnostics (http://forums.racebread.com/index.php?topic=245.msg1654#msg1654)
800 page R32 Service Manual (http://forums.gtrcanada.com/showthread.php?t=11462)
Crankshaft collar/Oil Pump Drive Issues (http://forums.racebread.com/index.php?topic=1585.0)
Why get an adjustable FPR (http://www.240sxforums.com/forums/showthread.php?t=35902)
Skyline fault codes (http://forums.gtrcanada.com/showthread.php?t=14107)
Report that Engine Failure (http://www.skylinesaustralia.com/forums/Report-engine-failure-t46581.html)
Fix your Hesitation (RB series) (http://forums.gtrcanada.com/showthread.php?t=26010)
The RB 4000-5000+rpm bog and sputter problem (http://forums.racebread.com/index.php?topic=636.0) <==Excellent Diagnosis!
Red dust on your coils? (http://forums.gtrcanada.com/showthread.php?t=16535)
Cleaning/Repairing the Coils (http://forums.gtrcanada.com/showthread.php?t=16618)
Z32 MAF on GTST (http://forums.gtrcanada.com/showthread.php?t=14976)
RB20 Part Numbers and X-References (http://forums.racebread.com/index.php?topic=255.0)
Compatible Parts List for GTS-T/Type M (http://forums.gtrcanada.com/showthread.php?t=16813)
RB25 Belt Numbers (http://forums.nicoclub.com/zerothread?id=119087)
RB Series Replacement Part Numbers (http://forums.nicoclub.com/zerothread?id=34102)
B&M Install on RB20 (http://forums.nicoclub.com/zerothread?id=112010)
RB FAQ (http://forums.nicoclub.com/zerothread/110509)
ARP PNs for Main, Rod, and Head Studs (http://www.240sxforums.com/forums/showthread.php?t=80390)
Retrofit J30 Ignitor for RB20 (http://forums.nicoclub.com/zerothread?id=116502)
Cambelt change for R33 GTS-t (http://www.skylinegts.co.uk/Cambelt.htm)
Unit Converter kW to Hp (http://www.locost7.info/converter.php)*****
RB20 Turbo Upgrade; Dyno Results (http://www.skylinesaustralia.com/forums/Rb20-Turbo-Upgrade-Dyno-t103095.html)
RB25 Turbo Upgrade; Dyno Results (http://www.skylinesaustralia.com/forums/Rb25-Turbo-Upgrade-Dyno-t55845.html)
RB26 Turbo Upgrade; Dyno Results (http://www.skylinesaustralia.com/forums/Rb26-Turbo-Upgrade-Dyno-t93880.html)
GTR Injectors in RB20 (http://www.skylinesaustralia.com/forums/lofiversion/index.php/t62674.html)
Injectors/Resistor Image (http://i54.photobucket.com/albums/g102/Annie907/RB20/injectors.jpg)
Complete teardown of RB20 Tranny (http://forums.gtrcanada.com/showthread.php?t=16346)


SR
SR Swap on a Budget (http://www.240sxforums.com/forums/showthread.php?t=2262)
SR Swap step by step (http://www.240sxforums.com/forums/showthread.php?t=12454)
Hicas Pump with SR (http://www.240sxforums.com/forums/showthread.php?t=48280)
SR Fault Codes (http://www.240sxforums.com/forums/showthread.php?t=434)
Hiding Wires: SR (http://forums.nicoclub.com/zerothread/228716)
SR Cross References (http://www.240sxforums.com/forums/showthread.php?t=435)
Suzuki Sidekick Igniter for SR (http://forums2.freshalloy.com/showthread.php?t=115079)
SR Camshaft Mega Thread (http://forums.nicoclub.com/zerothread/210484)
SR FAQ (http://forums.nicoclub.com/zerothread/145184)
SR FAQ X2 (http://srownersclub.com/faq/)


CA
Driftopia! (http://www.driftopia.com/tech-and-how-tos/) - Has swap guide, troubleshooting, references and more.
Lowering the CA18 (http://www.driftopia.com/2007/07/01/hockey-puck-motor-mounts/)- Liked this.
CA18DET Links List (http://forums.nicoclub.com/zerothread/136061) - Has wiring instructions on fitting different MAFS, fitting DSM resistors, standalone installs how to...

I'd like to hear people's response to this, and any way they think I should modify it... Like different categories, how I should arrange things (alphabetical, order of interest)... I did a couple stars next to the ones I thought were really interesting, and if you guys have ratings to other links that'd be nice to know too...

Added 12/03/07:
Thanks to you guys and a couple others, I do have some CA links that I'll post when I get home later today. For now, while I'm at work, I added almost 50 more links.

Added 12/29/07:
Sorry, still not a lot of CA links, but I'm sure the sites listed will be a good start for anyone looking just for general info.

tunerzimage
11-21-2007, 07:02 PM
<3

Awesomeness. Ill add a couple now and more later when i get home.

http://www.jgsturbo.com/arptrq.html - KA24DE Head & Main Stud install
http://twinturbo.net/net/viewmsg.aspx?forum=general&msg_id=2079707 - Vast collection of everything nissan

84GTSR5
11-21-2007, 07:08 PM
Wow Great Job +Rep for you Sir

Antihero983
11-21-2007, 07:08 PM
alot of CA stuff you can find on Australian forums, in all my searching, most of info has come from them...


but good so far!

downshift_sideways
11-21-2007, 07:11 PM
very nice,

thread has been subscribed, posi rep ;)

hijack3d
11-21-2007, 07:14 PM
Thanks guys... Sorry no CA stuff yet, I will look in Aussie forums for the next update... just never swapped in a CA or worked on one before so never had the need to look up stuff on it... but that's not to say there's no love there! :P

lflkajfj12123
11-21-2007, 08:17 PM
saweet

half the links in 240sx bible vol 1 are down anyways

DreamN
11-21-2007, 08:23 PM
posi rep for you.

definitely a great post.

Lordrandall
11-21-2007, 08:48 PM
Damn, nice post. +1

S13SilviaGirl
11-21-2007, 08:49 PM
Great post.

Plus rep for you!!!

tdub377
11-21-2007, 09:06 PM
WOW!!! This is so usefull. I think this should be a sticky.

+1 for you!!!

808_Drift
11-21-2007, 09:41 PM
YES STICKY!!!
great thread!
posi rep for you!

Subzeroqc
11-21-2007, 09:45 PM
Wish I could give you rep..... fcking awesome thread!

Syncade
11-21-2007, 10:03 PM
sticky for sure, very helpful :hsdance:

2f2fLOL
11-21-2007, 10:21 PM
Awesome thread! +1 rep

diomedes
11-22-2007, 12:33 AM
For sure for sure gotta sticky this!

+1 for you my good man.

SW20Racer
11-22-2007, 12:47 AM
another vote for the sticky and + for youse

BoostinGST
11-22-2007, 09:00 AM
thanks... Repped.

pinkarrowsnow
11-22-2007, 10:45 AM
vote to sticky and +rep thanks

k0uki
11-22-2007, 05:39 PM
sticky it. +

Antihero983
11-22-2007, 05:47 PM
sticky that shit!

Folken
11-22-2007, 06:25 PM
I agree I think this HAS to be sticky'd... if it's not i'll probly bite off my foot and i don't wanna do that

tt99ol
11-22-2007, 07:20 PM
good stuff, i love threads like this

snappy
11-27-2007, 01:46 PM
subscribed

msglent

Unholy S14
11-27-2007, 01:48 PM
one of the best threads on any 240 forum

repped

skylindrftr
11-27-2007, 01:52 PM
damn nice of you to do so =)

Okinawandrifter87
11-27-2007, 01:56 PM
dummy rep for you my friend!!! Great job!! =0)

Landers
11-27-2007, 02:24 PM
Excellent job sir posi reppin' alll thaaa wayyy!!:D :D

hijack3d
12-03-2007, 04:34 PM
Alright, so I'm not all the way done.. haha.. but I do have a .doc file that has all of these links, that's typed with the html-thingy that the forum recognizes for easy copy-paste to other 240sx forums. I don't know how to host the file so if anyone does, please let me know. I can also email you the file if you PM me!

Antihero983
12-03-2007, 05:22 PM
hey i hope that CA info link i sent helped!!!

turtle m3th
12-03-2007, 06:49 PM
http://www.ka-t.org/forums/viewtopic.php?t=14589&highlight=350z+clutch
This might be a good addition to your drivetrain section. Awsome write-up by the way!

ka-turbo
12-12-2007, 07:06 PM
i didnt see anything on rust removal or repair......you should put alot detail info seeing how alot of ppl have rust problems.

wonkuuzenki
12-12-2007, 07:28 PM
You fucking rock my world.
It's great to see someone compile information like that.

hijack3d
12-29-2007, 04:12 PM
i didnt see anything on rust removal or repair......you should put alot detail info seeing how alot of ppl have rust problems.

The S14A Refurb (http://www.sxoc.com/vbb/showthread.php?t=283826) I put up has a section on Rust Removal (he links to it on the first page). OP even did an "experiment" to see which products worked best for rust prevention (I know he also has a post about it on Zilvia, but can't find it). But I also just included 2 links in this latest update w/ a "how to" and SEM Rust Mort (my favorite products) tech sheet that includes the "how to" on how to use it.

Everyone...thanks for the rep/good vibes. I'm just hoping to minimize redundant newb questions and help people out... I know it took me a while to get the whole searching thing down to an art.

steve_o1989
01-04-2008, 09:16 PM
Nice post! Why isn't this stickied though? This shit is gold.

fawkyoolayz
03-31-2008, 01:52 PM
great write, helped a lot

project_s13
04-09-2008, 11:05 PM
i checked the ecu pinout and lots of it was wrong. so i wipped out my nissan manual and corrected it between it and mitchell on demand im sure its right ;P so i re-did it and reposted it. and FYI the PLX one the site lists is messed. here the link http://www.zilvia.net/f/showthread.php?t=186529 thats my new master copy and ill make ones for rest of the s chassis if people want them


PS also found this in my pinout search to hook my my neo and CAMP http://www.tunerfriends.com/forums/showthread.php?t=5496 pretty much same deal few different links.. enjoy all

project_s13
04-09-2008, 11:10 PM
http://i28.tinypic.com/311ngqx.jpg

carbonx240
04-10-2008, 12:24 AM
great write up. this is the first time i have said this :+rep
.
now i can start to read every link and start to study till i become pro :blah: but thank :angel:

D1S13
04-10-2008, 02:10 AM
sticky for sure :)

Dutchmalmiss
04-10-2008, 10:47 AM
Can I request that you include production numbers for the S-chassis?

Also, because I can't find it, does any one have the numbers produced in each color? I'd just like to know how many others own a metallic grey S13 like me haha.

KiLLaS13
04-15-2008, 12:53 PM
:bigok: GOOD JOB!

an_orange_s2k
04-15-2008, 01:15 PM
this is great +rep for you!

MELLO*SOS
05-23-2008, 02:35 PM
Really useful post I just re-stumbled across

Here's something I made that you could integrate into the RB section, might help someone.. RB20 Ecu Wiring Harness Color Pinout

http://img.photobucket.com/albums/v180/mello88/A31R32RB20DETECUWIRECOLORHARNESSPIN.gif

WoolyS14DET
06-14-2008, 05:38 PM
Great thread !!!! Very usefull !!

touge monster
06-15-2008, 02:10 AM
+1! x infinity <333

justaKAiswear
06-15-2008, 08:08 AM
+love for absolute pure amazing goodness! Im already using it!

cgtdream
06-16-2008, 12:11 AM
I agree I think this HAS to be sticky'd... if it's not i'll probly bite off my foot and i don't wanna do that

+2 Sticky Please for a great thread !!!!!!!

s13 @ fullboost
06-16-2008, 12:58 PM
you are a very brilliant man keep up the great work sir =]

Phaze*2_Mizzark
06-25-2008, 03:14 AM
great thread

DALAZ_68
06-28-2008, 12:51 PM
great threadits its [email protected]!!!!!!!!!!!

tgxlayzie
07-16-2008, 07:30 AM
have any thing on how to take apart and rebuild a rb25 head

illvialuver
07-17-2008, 04:05 PM
thanks alot for staying with the forum even though you have ha to change names so you could bring us this..

punxva
07-17-2008, 04:19 PM
yes my suspension thread is now a part of 240sx biblical history!!!

turbocrazy07
07-18-2008, 05:15 PM
awesome collection

Om1kron
08-08-2008, 12:16 PM
the 6 speed ka project is dead in the water. May want to take that one down. Some people have been doing z32 transmission swaps but I don't believe those are 6 gears.

Om1kron
08-08-2008, 05:44 PM
Biggamehit's Write-ups and Installs (http://240sxdrifter.tripod.com/writeups/writeupindex.html)

ttLOVEjh s13
09-07-2008, 01:06 PM
wow thats nice

onevia drift
09-07-2008, 04:51 PM
Here is a guy i know who has a bit of stuff up on the CA's..
Driftopia Tech Blog ยป News (http://www.driftopia.com/)

.Smitty.
09-08-2008, 09:26 AM
Bookmarked and subscribed! This is awesome!

Fonix36
09-08-2008, 09:59 PM
intense you have done good props

Pho Man
09-08-2008, 10:18 PM
Definitely a nice thread. I'm subscribing to this thread!

Wake
09-19-2010, 11:51 PM
subscribed.

hacknik
09-19-2010, 11:57 PM
ditto^^^^^

LimeLite Racing
01-14-2011, 07:20 PM
Years later I still refer to this thread from time to time. Thought I'd bump for all of you searchers who don't even know what to search for... yet. Has a lot of preventative maintenance. Don't know why this never got stickied.

Playosio
09-23-2013, 12:01 AM
My fellow S13 drivers, I need some help. None of the lights on my car work except for when I step on the brake and turn signals. Does anyone have any idea how to fix this?

PandahZ650
09-23-2013, 01:49 AM
My fellow S13 drivers, I need some help. None of the lights on my car work except for when I step on the brake and turn signals. Does anyone have any idea how to fix this?

did you check the fuses? for any shorts? or any blown bulbs?


wish some of the links in here still worked.

zerodameaon
09-23-2013, 02:02 AM
did you check the fuses? for any shorts? or any blown bulbs?


wish some of the links in here still worked.

Really you are going to respond to him? Bumping a three year old thread with something completely unrelated.