TW: 210 BAR/ 3045 PSI High Press. Power Steering Line(s)

[AzNCmB]

hey guys,

For sale, high pressure power steering lines. Unlike the factory line that leak over time, these lines would never break if installed correctly! Great for any type of driving/racing. I have a few of them and would sell them for $75 shipped or picked up each.

Features:
210 bar/3045psi High press. Eaton Aeroquip hosing
fittings and o-rings
factory replacment
all hardware included for installation

Benefits:
Withstands way more pressure than what stock ps can produce, meaning more full lock to full lock counter steering action!
No more leaks
same price as oem lines from napa, pretty sure they are cheaper than oem nissan
long lasting
eliminate the long loop of stock line, which gives better clearance if you're using e-fans such as altima or want a cleaner less cluttering engine bay.


right now, all i have is lines for dohc ka24de which is also compatible with sr20det motors.

http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/DSC01211.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/DSC01210.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/DSC01208.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/DSC01209.jpg



disclaimer: these are for offroad use only, i am not liable for product failure wich includes but is not limited to mis use or improper installation. Also, these eliminate the factory ps pressure sensor.

reply here, or pm me if interested...
location: new orleans, La
thanks in advance


payment method:
paypal or money order via snail mail or cash in hand(in person transaction)
paypal address will be up once i get someone interested...

installed pictures and installation below...

[ctm_motortrends]

Can I get a pic of it installed ? Dibs on one.

[AzNCmB]

Can I get a pic of it installed ? Dibs on one.

yes, i will get a few pics of it installed on my s14 tomorrow when there's daylight. I will also include a short install instructions too.

thanks for your interest.

[AzNCmB]

heres installed pictures: (no flash)


http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01270.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01266.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01267.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01268.jpg

(flash)
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01265.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01263.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01262.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01264.jpg



http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01208.jpg
^^ basic instructions^^


these come 17inches long, which imo is just about enough in length, but I can get them longer or shorter if you guys need it to clear more stuff.

When ordering, please specify custom length if needed, if you don't, then you would get the standard 17inch.

lmk

[sean350z]

I may take one...what's the fitting/thread pitch size on the rack for the low pressure line?

Thanks,
Sean.

[AzNCmB]

I may take one...what's the fitting/thread pitch size on the rack for the low pressure line?

Thanks,
Sean.


i'm not %100 sure whats the size/thread pitch, since i reused the stock fitting and just bought new hoses...



judging from the picture, it looks similar to the high press. side that goes into the rack, so who know's, they both may be the same 14x1.25.

hope that helped...

bump!

[Sir]

its 16mm, same as used for pump.

[vutony]

from the pics, the line looks stretched
interested if you have have it coupel inches longer

[AzNCmB]

its not stretched at all, as much as you can try, physically, you cant stretched these lines...

and yes, i can get them longer if u need, just let me know the length, as stated in the previous post, these are perfect for me, no stretch or anything, clears the crossmember fine

[AzNCmB]

http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01273.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01273.jpg
http://img.photobucket.com/albums/v695/azncmb/motor%207-14-07/Hi%20Press%20ps%20line/DSC01275.jpg

pics of what i have so far...
i can get more to0...

bump, lmk!!! ready to ship!
paypal address is [email protected]

[AzNCmB]

bump, paypal address up!

[vutony]

how long is it?
is it the same length as stock

intersted in any trades?
http://www.zilvia.net/f/showthread.php?t=165039

[sean350z]

Bump paypal sent.

[statik]

interesting, though I thought those double loop lines in the front were for some sort of cooling?

[AzNCmB]

how long is it?
is it the same length as stock

intersted in any trades?
http://www.zilvia.net/f/showthread.php?t=165039

it is not the same length as stock, its around 16 or 17inchs long. The lines eliminate the stock loop that goes from the pump to the front(near the radiator) and then to the rack.

This line is straight point A to point B, Ps pump-----> steering rack, no loops, a small S bend, thats it.


the only thing im interested in your thread to trade is the nismo 740cc injectors, but Im sure u want cash+trade, right now I cant do that, but I'll let you know when I have funds available.



Bump paypal sent.

thanks! will be shipped ups today! i'll get u a tracking number...


interesting, though I thought those double loop lines in the front were for some sort of cooling?

hmmm...
i dont think so because the oem cooler is on the low pressure side, its a bunch of aluminum tubes that go from the driverside to the pass. side along the cross member.

[Skullavera]

Will the price be the same if the line is 20" long? I think that length would be perfect for me.

[grnappletree14]

can u tell me the fitting sizez i have a aircraft place by my house that can make them lmk thanks

[AzNCmB]

^^bump^^bump^^^^bump^^^^

[AzNCmB]

bump!!bump!!bump!!bump!!

[vutony]

the only thing im interested in your thread to trade is the nismo 740cc injectors, but Im sure u want cash+trade, right now I cant do that, but I'll let you know when I have funds available.

ill take one line plsu cash for the 740cc whenver ur ready
i need line to be an inch or so longer

[Bushido]

can you make a hose for the low pressure side too?

[AzNCmB]

can you make a hose for the low pressure side too?

no,
i'd rather not, because the low pressure is fine with the stock line or a stock replacement hose...it doesnt seee much pressure, hence "low pressure"

[lbsam]

you still have some of these left? I can't purchase until next friday.. (pay day.). JW if you still have some because im needing one.

[AzNCmB]

yes, i have like 4 more left...
lmk

[dops13]

I sent you money. This is way cheap!!!

[AzNCmB]

thanks guys, payments recieved...
will ship out 2morrow...

expect usps priority

[D.Bo]

BUUMP!! just bought my second line for my other 240. ive had it on my s13 for over a year now and ive just got another one for my other s13. great product good seller