Ecu

[trevor34]

Hi, I have a question might be stupid but I cant find anything on it, i have a 96 s14, witch is a OBD2 and i was wonder if it is possible to put a s13 or and OBD1 ECU in place of my current ECU, thanks for any info.

[DALAZ_68]

no

the male end on ur OBDII harness is different from the female plug on the OBDI ECU

[hijack3d]

They do make an "adapter" harness for the S14 to use an S13 ECU...Although the only place I've seen it is w/ flashed ECUs...

[DALAZ_68]

They do make an "adapter" harness for the S14 to use an S13 ECU...Although the only place I've seen it is w/ flashed ECUs...


well if u go the technical route then yeah thats true


i thought he was asking just straight plug and play...

but there are was...adapter ahrness as stated above...

or cutting the male end of the s13 hasness and integrating it to the s14 harness

but thats some serious work and u gotta know wiring and which wire is which,

so in asense, there are ways

[stinky_180]

but thats some serious work and u gotta know wiring and which wire is which,

thats what the factory service manuals are for.

[DALAZ_68]

thats what the factory service manuals are for.

agreed

but how serious and how dedicated is he to put the work in :bow:

[trevor34]

Well ya i wasnt 4 sure if the ends r the same and thats what i was going to do is cut the ends off and wire it wire for wire, but the adapter things sounds good could u point me in the right direction, thanks again guys for the help.