MELLO*SOS
11-15-2007, 02:12 PM
Edit: Mando hooked it up with the infos! Future searchers and 5 lug converters, here you go:
Rear Piston Caliper Pad Pins - 41217-43P00
Rear Pad Pin Clip - 41218-43P00
Rear spring -41090-43P00
Got some rebuilt rear z32 calipers in, but one caliper is missing the two retaining pins, wire clip and caliper spring bracket for the pads. No big deal, I got the PNs for the retaining pins and the spring bracket -- but I need a PN for the little wire clip that holds the pins and bracket in. Anyone have this number handy?
Rear calipers pic:
http://i12.ebayimg.com/01/i/000/c3/de/ba0f_1.JPG
Just for other Z32 brake swap searchers, here's the PNs for the pins and bracket, CourtesyParts.com sells the stuff cheap:
http://www.courtesyparts.com/Merchant2/graphics/00000001/z32/41090-Z32ALL_t.jpg
Rear Caliper Spring $4 from courtesy nissan
http://www.courtesyparts.com/Merchant2/graphics/00000001/z32/41217-Z32NA_t.jpg
Rear caliper retaining pin $7 from Courtesy
They also list a "Rear Brake Hardware Kit (complete rear) - 1990-1996 300ZX - 44080-00001", but from looking at the picture it doesn't include the wire clips.. Haven't seen a PN for the clips mentioned on any of the z32 brake swap threads I've read.
Thanks for reading...
Rear Piston Caliper Pad Pins - 41217-43P00
Rear Pad Pin Clip - 41218-43P00
Rear spring -41090-43P00
Got some rebuilt rear z32 calipers in, but one caliper is missing the two retaining pins, wire clip and caliper spring bracket for the pads. No big deal, I got the PNs for the retaining pins and the spring bracket -- but I need a PN for the little wire clip that holds the pins and bracket in. Anyone have this number handy?
Rear calipers pic:
http://i12.ebayimg.com/01/i/000/c3/de/ba0f_1.JPG
Just for other Z32 brake swap searchers, here's the PNs for the pins and bracket, CourtesyParts.com sells the stuff cheap:
http://www.courtesyparts.com/Merchant2/graphics/00000001/z32/41090-Z32ALL_t.jpg
Rear Caliper Spring $4 from courtesy nissan
http://www.courtesyparts.com/Merchant2/graphics/00000001/z32/41217-Z32NA_t.jpg
Rear caliper retaining pin $7 from Courtesy
They also list a "Rear Brake Hardware Kit (complete rear) - 1990-1996 300ZX - 44080-00001", but from looking at the picture it doesn't include the wire clips.. Haven't seen a PN for the clips mentioned on any of the z32 brake swap threads I've read.
Thanks for reading...