PDA

View Full Version : Complete R32 GTR Front & R34 Rear Calipers & Rotors; Optional SS Lines & R33 Cables


Slidin240Wayz
11-12-2007, 11:50 PM
ITEM: Complete R32 GTR Front & R34 Rear Calipers & Rotors
PRICE: SOLD
SHIPPING:
DESCRIPTION: R32 Front GTR Calipers are larger than the 300ZX 30mm calipers. The rotor on the GTR setup is a 295x32, while the Z32 setup is a 280x28.

The front rotors are from Nismo and have plenty of life on them.

"The Skyline GT-R (R32) brake system will improve the ultimate braking performance of the 300ZX by increasing the brake pad swept area by 6.8% and internal cooling capacity by 82% over the OE front brakes.
NOTE: A significantly greater improvement in internal cooling capacity (136%) will be obtained on early (up to 7/90) non-turbo models as these were equipped with the "small" 26mm brake rotors.
These early cars will also require the longer 116mm (vs 112mm) brake pad retaining pins (1 per wheel) (part# 41217-Z32TT).
CAUTION: Some grinding may be necessary to obtain proper wheel/caliper clearance.
Cross-drilled rotors will increase brake pad wear.<www.courtesyparts.com>"


The R34 rear calipers and rotors are the same as the ones found on the R and Z32 chassis.

The pads have plenty of life on them and I believe they are from Project Mu.

This setup brand new would cost $1,200+.

http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=CP&Category_Code=240sx_nms_gtrbrake

All you would need for the rear would be the e-brake assembly which you can find used or from Nissan. If you have a S13, Z32 2+2 (I think) cables would do the trick.

Optional:

SPL SS Teflon coated lines; $75

R33 E-brake Cables for a Z32 Rear setup on the S14 Chassis; $140

PICTURES:

http://i7.photobucket.com/albums/y264/Cdoria/DSC00020.jpg

http://i7.photobucket.com/albums/y264/Cdoria/DSC00025.jpg

http://i7.photobucket.com/albums/y264/Cdoria/100_6264.jpg

http://i7.photobucket.com/albums/y264/Cdoria/DSC00731.jpg

http://i7.photobucket.com/albums/y264/Cdoria/Drift%20S14/DSC01844.jpg

http://i7.photobucket.com/albums/y264/Cdoria/DSC03924.jpg


CONTACT INFORMATION:
LOCATION: NJ
EMAIL: C doria (at) comcast .net
AIM: carlos11 84 (1 word)
PHONE: 908-265-2578
PAYMENT OPTIONS: Paypal, Certified USPS Money Order, Check, and/or cash; first three payments have to clear in order for me to send the item out.
FEEDBACK: http://myworld.ebay.com/carlos1184/
http://www.importfanatix.com/Forums/showthread.php?t=1438
http://www.zilvia.net/f/showthread.php?t=95530

Wishing you all the best,
Carlos Doria

Slidin240Wayz
11-14-2007, 03:32 PM
Bump Number 1

brn2slid
11-14-2007, 03:58 PM
where did you find rotors to work for these calipers?

Slidin240Wayz
11-14-2007, 09:12 PM
where did you find rotors to work for these calipers?


I purchased them with the calipers.

I posted a link for brand new items through courtesy parts.com

Slidin240Wayz
11-20-2007, 05:50 PM
Bump Number 1