What are you guys using as a air intake hose? Pipe?

[Captain_Ron80]

SR20 is installed. I have no stock piece to go between the MAF and the turbo inlet. So I need some "S" shape hose or pipe. Please give me your experience on what you did. Links would be good! Thanks a mil!
Captain Ron

[JDMClifford]

used my stock one... you could always buy one. i have a cupple luying around. or you could use 3 inch tubing.

[zaquanh]

go u to auto zone they have have a wierd one , get that for the time being

[Captain_Ron80]

Some one posted this link on another forum. It is exactly what I was looking for. Just thought that I would post it in case someone else had the same question. Thanks for you input!

http://pipingpro.com/shop/prod...d=150 (http://pipingpro.com/shop/prod...d=150)

Captain Ron

[max_POWER]

good luck dealing with those idiots.
ive sent at least 4 emails for prices/orders and not one response!

[unicoladron]

go u to auto zone they have have a wierd one , get that for the time being

umm if one were to go to autozone to purchase a part that you can find only on JDM engine, how would one go about doing so?

[Captain_Ron80]

good luck dealing with those idiots.
ive sent at least 4 emails for prices/orders and not one response!

You tried calling?

Actually... couldn't find a phone # on their site.

Captain Ron

[Z U L8R]

4" alumineeyumized steal + tig welds ftw!

actually at lowes....there's this shit kinda like dryer hose....except tougher...there's 2 kinds. there's kind that you can cut with a razor blade, and there's kinds you can't cut unless you use a ziz wheel. the latter is better but the first kind ain't too shabby if you keep it bunched up
gl
Dave =]

[max_POWER]

You tried calling?

Actually... couldn't find a phone # on their site.

Captain Ron
ya if i could have found a phone number i would have just called them, but i guess it wasnt meant to be.
I dont understand how finding something so stupid like an intake is so freakin hard for these motors.
you either spend $200+ on some BS aluminum pipe with a brand name on it or use the stock rubber crap.

LAME

[statik]

my first intake i just bought a CAI for some eclipse off ebay for like $20 that had the right bends in it and cut it up, worked good but i wanted a bung for the valve cover so i got one from piping pro back when he was still selling them, im pretty sure they are too busy to handle any orders right now.

[EAS13]

Some one posted this link on another forum. It is exactly what I was looking for. Just thought that I would post it in case someone else had the same question. Thanks for you input!

http://pipingpro.com/shop/prod...d=150 (http://pipingpro.com/shop/prod...d=150)

Captain Ron


Here, fixed your link

http://pipingpro.com/shop/product_info.php?cPath=21_30&products_id=150

Also, confirm with them if it comes with couplers (probably not).

[Pepperoni]

Yes it comes with couplers/clamps.

max_POWER u have PM

EDIT:
And just so you fellow Zilvians know, there is going to be a group buy for these very soon. I think it will be for T25 intakes and for the GT2871R intakes. And as far as I know, once the GB is up, there is absolutely no fabrication wait time.

[Captain_Ron80]

Yes it comes with couplers/clamps.

max_POWER u have PM

EDIT:
And just so you fellow Zilvians know, there is going to be a group buy for these very soon. I think it will be for T25 intakes and for the GT2871R intakes. And as far as I know, once the GB is up, there is absolutely no fabrication wait time.

How soon Mr. Pepperoni? I am going to be ordering this soon for this is my final part to install.

Captain Ron

[max_POWER]

pepperoni FTW!
thanks for the PM man!

[Captain_Ron80]

Is pepperoni a piping pro rep?

[statik]

Is pepperoni a piping pro rep?

he basically is piping pro haha

[Pepperoni]

Lol, its not just me anymore :wiggle: although we need more people we can trust :rant:

You got PM captain :bow:

[hayai_240]

Are you going to be offering a special for those w/ a T28 turbo also? If so, i'd purchase one. I'd also like to add the catch can flange and recirc-flange.

[Pepperoni]

Are you going to be offering a special for those w/ a T28 turbo also? If so, i'd purchase one. I'd also like to add the catch can flange and recirc-flange.

T28 idea is still up in the air. Certainly can include them in the Group Buy if there's enough demand. As it stands, theres way more people asking for T25 intakes than T28. However, the group buy will most likely only have intakes with catch can bung on them, no BOV bung. The focus is to have all intakes ready to ship with 0 wait time once the GB is up, since that is the top concern from most people.

And to answer the previous question, group buy will probably be posted in about a week. You can PM me if you want me to let you know it's up so you dont miss it.

O and hayai_240, u have a PM :)

[Captain_Ron80]

Please update when you can Pepperoni.

Captain Ron