PIC REQUEST: s13 w/ widebody fenders, BUT stock bumpers

[Dutchmalmiss]

Yeah since i'm in love with my pignose lip and mudflaps, I'd like to know if anyone's ever gotten any type of widebody front and rear fenders but still retained the stock front and rear bumpers. I know I'd need to mod the mudflaps a bit, it might look ugly, but I just wanna see if anyone's done it. thanks!

[Flybert]

Looks like 30mm fenders molded on there. The 30mm ones don't go all the way down so it wouldn't mess with your mudflaps.

http://i99.photobucket.com/albums/l297/Mathias211/schassis/P1040499.jpg

[Dutchmalmiss]

OOO that looks awesome. front fenders look untouched, though. Thanks for that pic nonetheless.

[steve shadows]

is the above acceptable to all the board members?

I need to make sure my car is visually acceptable to all the board members

just making sure all the board members accept the above visual qualities.

[Dutchmalmiss]

^ I'm lovin your sarcasm. If you're not being sarcastic, then start a poll with a pic of your car titled "like my car?" Otherwise, I asked for pictures, not opinions. But then again there are always people here looking for trouble.

[brokeAs240sx]

is the above acceptable to all the board members?

I need to make sure my car is visually acceptable to all the board members

just making sure all the board members accept the above visual qualities.

I approve!

Need reassurance... like ur 295/40R18 on a 9" rim thread? ;)

[steve shadows]

yes my car actually has enough HP to spin 20s with 295s

[brokeAs240sx]

Good for you, make sure you get the right sidewall height tho, and try not to have too buldgey a sidewall (as I have already mentioned in the other thread).

And back on thread topic, wide front fenders will work fine w/ stock bumper - you'll still need to fit it just like any other fiberglass piece tho.

[JRas]

Looks like 30mm fenders molded on there. The 30mm ones don't go all the way down so it wouldn't mess with your mudflaps.

http://i99.photobucket.com/albums/l297/Mathias211/schassis/P1040499.jpg

:eek2:msg length

[B Love]

I think it will look weird

[macey]

thats an australian car. more pics and all the info from the build up can be found at http://www.sillbeer.com

-macey

[Zemus]

WOW, what an amazing car, if you look at the under chassie its mint.. WTF if they sold s13s like this stock.. I mean.. wtf. fuck areo at that point

[Flybert]

WOW, what an amazing car, if you look at the under chassie its mint.. WTF if they sold s13s like this stock.. I mean.. wtf. fuck areo at that point

Show cars are wack. Look at the frame rail. It's missing. AHAHAHAHAHA

http://www.sillbeer.com/images/underneath/gearbox.jpg

[slideways2004]

lol. its looks like its gonna stay like that and not be fixed. so 1st its australian?? fail. 2nd- show car- fail!!!!!!!:fawk:

[20 til 3]

looks hot as hell

i'm actually looking for similar pics... but i can never find them(i'm doing widebody silforty... no body kits... stock silvia k's bumper) but everyone does a huge body kit normally

[tacotacotaco]

Nice car great daily driver.

[nevaland9]

This car is sickkk, too bad its not level. i want it, lets trade.
http://www.sillbeer.com/sillbeer-sunset-20070720/images/P1040488.jpg

[sr20drifter1]

That car is siiiiiccckkk.Nice job. I love it. What wheels are those? What are the specs on them?

:eek2:msTg length

[ayuaddict]

i dont know who's car this is but:

http://i22.photobucket.com/albums/b342/ayuaddict/img9073sof2-1.jpg

S13, check.
overfenders, check.
stock bumpers, check.

edit: upon closer inspection the front bumper and skirts appear to be fiberglass replicas of the stock pieces...but since the dimensions are the same this should work.

[EJ253]

this thread delivers!
widebody on stock areo = wicked

[bo2o]

more please!

s13 hatch or coupe.
i always thought it would look weird. but it doesnt tho.

[nwmrkt]

the red coupe...his car is my favourite s13 iv seen so far. Also the fenders that are on it are...50mm molded rear, 30mm(i think) molded fronts, the fender vents were deleted.

[nwmrkt]

and the frame rail is missing because it it...came like that from the factory if you look on other 180sx, 200...etc.

[azndoc]

I wouldn't mind my tranny and other parts looking just as clean.

But then I plan on running HTM more and I know that shit would get fucked.

[steve shadows]

and the frame rail is missing because it it...came like that from the factory if you look on other 180sx, 200...etc.

really?

I learned something new.


care to tell us (if you know?) why?

[Flybert]

Why would the jspec cars be missing that?

[nwmrkt]

the rails are missing...because it is, ha. I honestly dont know why, but they do come like that from the factory. Other 180sx owners did confirm also.

[Irukandji]

the rails are missing...because it is, ha. I honestly dont know why, but they do come like that from the factory. Other 180sx owners did confirm also.

Are you retarded?

[steve shadows]

no hes



Join Date: Jul 2007
Location:

no i cant do that

ive been too bad already

seriously though canada has more access to jdm cars

[smelly240]

i see that before too - dont remember where - but i do - and i seeing a peice to connect the frame rails on the uras site but whats it say???

http://uras.co.jp/yokaparts_image/nomunohjako_01.jpg
な ぜか、S13系のクルマには助手席側のフレームがなかとです。ホネなしのフレームほど頼りナイないモンはあ りません。ニッサンに文句を言う前に、よくご覧 下さい。ホラッ、こんな所に「よかモン」があるじゃなかですか。取り付けも簡単！ボルトオン。愛の架け橋的 新発想パーツですバイ。 http://uras.co.jp/setsumei_image/nomuhako.gif http://uras.co.jp/yokaparts_image/nomunohako_02.jpg http://uras.co.jp/yokaparts_image/nomunohjako_01.jpg

[Folken]

it's just a JDM thing to save weight, make you drift better, and I heard it gets you laid when the ladies see your car is made w/o them

[A Spec Products]

That car is siiiiiccckkk.Nice job. I love it. What wheels are those? What are the specs on them?

One of my favorite wheels (in the gangster face only though)

Wedssport TC105N

http://www.weds.co.jp/products/wedssport/tc105n.html

And yes, I can get them, however they require a lot of quantity to bring in

They are over $2k for a set, but have nice gangster fitment

The reason I didn't stock them was because I needed to do 20 pieces of 18x10.5+12 ONLY to bring them in, which was more than I felt would sell

[sr20boostn20]

that red car looks fresh,

if its a show car so be it, its not yours

who cares about the frame rail.

any one got anymore pics?

[Dutchmalmiss]

Damn that black kouki is pretty sick. Does anyone make fenders without any vents?

[nwmrkt]

Are you retarded?no, are you retarded?

[punch]

Is the red car running 18x10.5 +12s in the rear?

[A Spec Products]

Is the red car running 18x10.5 +12s in the rear?

Assuming thats a 30mm, and by the looks of the side pics, I'd guess yes, a 10.5+12

He should've ran a more stretched tire, then lowered + cambered it out for gangster flushness

[OptionZero]

One of my favorite wheels (in the gangster face only though)

Wedssport TC105N

http://www.weds.co.jp/products/wedssport/tc105n.html

And yes, I can get them, however they require a lot of quantity to bring in

They are over $2k for a set, but have nice gangster fitment

The reason I didn't stock them was because I needed to do 20 pieces of 18x10.5+12 ONLY to bring them in, which was more than I felt would sell

Lol, i was talking to CityTireBrian about the same thing today!

They need some better US distribution or somethin

and they need to make all their wheels the maximum concave instead of their 4-5 difference faces

[nwmrkt]

Assuming thats a 30mm, and by the looks of the side pics, I'd guess yes, a 10.5+12

He should've ran a more stretched tire, then lowered + cambered it out for gangster flushness i do believe the rear is 50mm, i had asked him before.

[nwmrkt]

here is his blog for his car if you want to see a real clean (literally) build.
http://www.sillbeer.com/

[punch]

http://www.sillbeer.com/2007/01/wheelstheyre-here.html

[punch]

i do believe the rear is 50mm, i had asked him before.

Where on the site is this listed?

[sillbeer_au]

G'day fellas

Thought I'd clear up a few things on my car. First up, I've been building it over the last 3yrs to be a daily driver. Secondly, it looks so clean because it's all been painted and has only just been registered. The heights are slightly different now, as I needed clearance for said daily driving so it's a little higher. This also means that the alignment can't have crazy camber and stuff especially if it's to be used on the track. The frame rail wasn't there from factory as mentioned by 'nwmrkt' (g'day mate), but I do have one of those URAS extension rails which I'm yet to fit...babysteps.

It's getting an alignment tomorrow and its first tune next week, exciting times ahead as we do the shakedown.

Check out the blog for more info, it's all there...use the search engine too. If you can't find the info, feel free to ask questions.

Cheers
Brendan

[nwmrkt]

G'day fellas

Thought I'd clear up a few things on my car. First up, I've been building it over the last 3yrs to be a daily driver. Secondly, it looks so clean because it's all been painted and has only just been registered. The heights are slightly different now, as I needed clearance for said daily driving so it's a little higher. This also means that the alignment can't have crazy camber and stuff especially if it's to be used on the track. The frame rail wasn't there from factory as mentioned by 'nwmrkt' (g'day mate), but I do have one of those URAS extension rails which I'm yet to fit...babysteps.

It's getting an alignment tomorrow and its first tune next week, exciting times ahead as we do the shakedown.

Check out the blog for more info, it's all there...use the search engine too. If you can't find the info, feel free to ask questions.

Cheers
Brendan
Hey bud, hows it going? You always manage to "stumble" upon a forum where you s13 is bring drooled over :yum:.

Anyways I have to give props again, im going the same direction with my underbody.

[sillbeer_au]

Hahaha, I don't exactly stumble, more like stalk. I check the access logs on the web server host and see where I'm getting the most hits from. That way I can track where people are coming from and clear things up where needed. I've got all sorts of people around the world watching it...it amazes me.

And good to hear I've had an affect on someone elses build...I like to think I can help others raise the bar.

Cheers
Brendan

[jilo]

yea thats stalking, efficient though. sick coupe man

[KA-T_240]

So being that they didnt come on some JDM car more proof of how useless they are! lol!


SILLBEER your car is HAWT!!!!!!!!!!!! and I am not the biggest fan of red red cars.

[sillbeer_au]

Where on the site is this listed?

Was originally listed here back in June 2005:
http://www.sillbeer.com/2005/06/body-moving.html

But the whole spec list is also available:
http://www.sillbeer.com/2004/08/plan.html

Cheers
Brendan

[silvia457]

here's a pic of my coupe Chargespeed front & 50mm rears, C-west sides, & sohc lip. I'm still looking for the rear bumper piece.

http://a248.ac-images.myspacecdn.com/images01/30/l_e986f31e1602941354a73a8369db7caf.jpg

[supad0rk]

i dont know who's car this is but:

http://i22.photobucket.com/albums/b342/ayuaddict/img9073sof2-1.jpg

S13, check.
overfenders, check.
stock bumpers, check.

edit: upon closer inspection the front bumper and skirts appear to be fiberglass replicas of the stock pieces...but since the dimensions are the same this should work.

I think that's Fred's car. Front and side skirts are OEM Kouki

[yokotas13]

Are you retarded?

no really though
mine didnt have it either.

[punch]

here's a pic of my coupe Chargespeed front & 50mm rears, C-west sides, & sohc lip. I'm still looking for the rear bumper piece.

http://a248.ac-images.myspacecdn.com/images01/30/l_e986f31e1602941354a73a8369db7caf.jpg

Any more pics of this car? Does anyone know the wheel size and offset?

[unwed_transient]

the car is unibody, so it's not there's an actualy "frame" anyway.


great looking car brendan.

[ayuaddict]

Any more pics of this car? Does anyone know the wheel size and offset?

silvia457 just stated that it was his car.

[ixfxi]

Show cars are wack. Look at the frame rail. It's missing. AHAHAHAHAHA

http://www.sillbeer.com/images/underneath/gearbox.jpg

that car is complete awesome. you completely suck ass if you think it doesnt

[slideways14]

pics of a s14 with wb fenders and stock or jdm bumpers?

[articdragon192]

the car is unibody, so it's not there's an actualy "frame" anyway.


great looking car brendan.

Truth. My Z actually lacks that section.

[bloodangels13]

mine with widebody and oem bumpers
old pics!
http://i69.photobucket.com/albums/i47/vwyand85/wyandcars009.jpg
http://i69.photobucket.com/albums/i47/vwyand85/wyandcars001.jpg
http://a484.ac-images.myspacecdn.com/images01/85/l_27a5ca4474b709a983e42a8d61fe854b.jpg