RB25DET Project and motor Partout!

[Coolwhip]

For Sale. All Parts are located in Central Florida. I accept PayPal (will also take money orders).

I can supply pictures of any and all the parts. I will ship items but prefer local pick up on the larger items. Shipping is within the continental US (48). I'm pretty firm on the pricing as well. If you don't see what your looking for then email me (however, individual parts that may cause other parts to not be sold will end up more costly).

Here is the list:

Aftermarket parts:

New RB25DET CP Piston set 86.5mm, 8.5:1 = SOLD

New RB25DET Greddy Intake Manifold with Q45 Throttle body, stock injectors, IACV, etc. (assembled) = SOLD

New RB25DET SYKO mount kit = SOLD

New RB25DET SYKO Turbo Outlet Elbow = SOLD

New RB25DET Driveshaft Shop S13 Steel Driveshaft = $310 shipped (PENDING)

New RB25DET Nissan Engine Gasket Kit = SOLD

New RB25DET ACL Race Rod and Main Bearing set = SOLD

New RB25/26 ARP Rod bolts = SOLD

New RB25/20 Hybrid Intercooler FMIC kit, includes polished piping, 2 sets of couplers black and blue, TBolt clamps, and S13 mounting hardware but can be used for an S14 = SOLD

New S13 KA/RB Koyo Radiator = SOLD

New Turbo XS RFL Type H BOV = SOLD

New HKS Q45 large honey comb filter = SOLD

Slightly used Greddy RB Timing belt (Never on a running engine) = SOLD

Used Apexi AVC-R Boost Controller = SOLD

Used Greddy Turbo Timer (w/ S13 harness) = SOLD

RB25DET Engine Part out: (used)

RB25DET 5spd. Transmission = SOLD

RB25DET Engine Harness = SOLD

RB25DET 5spd ECU = SOLD

RB25DET Turbo = SOLD

RB25DET Complete head w/ cosmetic work :) = SOLD

RB25DET Valve Covers, wrinkle can gray, -10AN fittings = SOLD

RB25DET Bare block, girdle = $200 + shipping

RB25DET Crossmember w/ steering rack, etc. = SOLD

RB25DET downpipe = $100 shipped

RB25DET Rods = $100 shipped

RB25DET CAS = $160 shipped

RB25DET Starter = SOLD

RB25DET Alternator and Bracket = SOLD

RB25DET Powersteering pump and bracket = SOLD

ARC style coil cover = SOLD

RB25DET Coil packs and harness = SOLD

RB25DET OEM Clutch (still has life) = $100 shipped (PENDING)

RB25DET OEM Flywheel (surface rust) = SOLD

RB25DET Harmonic Balancer = SOLD

RB25DET A/C compressor, bracket, and lines (WILL PART) = $320 shipped (PENDING, LINES HAVE BEEN SOLD)

RB25DET Oil pan, had to knock out some dents and crap = $60 shipped

RB25DET Oil pump = $85 shipped

RB25DET Water pump = $65 shipped

RB25DET Belt Tensioner and Idler pulley = SOLD

ALL THE MISC PARTS YOU CAN THINK OF I WILL HAVE.

Best form of contact would be email:

Coolwhip (at) tmail (dot) com

[kouki_s14]

how much for the (manual im assuming) flywheel bolts? pm me price shipped please

[Bushido]

do you have a price for everything picked up? looks to me that theres all the parts for a complete swap, just needs assembly, right?

[mayco_86]

Thats a good price on those Syko mounts. Gl with the sale bro.

[Coolwhip]

RB25 Alternator, Starter, coils, etc. as well.

On the flywheel bolts i sent you a reply as well as the parts being picked up.

I do accept paypal as it is the same as my emailing address and I am verified.

All other PM's are replied to!

and thanks Mayco

[tdub377]

Very interested in these.
Slightly used Greddy RB Timing belt (Never on a running engine (http://www.zilvia.net/f/showthread.php?t=163375#))
New S13 KA/RB Koyo Radiator
$350 for everything shipped?

[Coolwhip]

Very interested in these.
Slightly used Greddy RB Timing belt (Never on a running engine (http://www.zilvia.net/f/showthread.php?t=163375#))
New S13 KA/RB Koyo Radiator
$350 for everything shipped?

$370 shipped since I could plug the timing belt in the same box.

Let me know, Thanks

[tdub377]

Can you post some Pics???

[Coolwhip]

Sorry for the crappy pictures, can't find the digital.

http://img461.imageshack.us/img461/2451/img00075my9.jpg
http://img451.imageshack.us/img451/1395/img00076mj0.jpg
http://img208.imageshack.us/img208/6161/img00077lt6.jpg
http://img451.imageshack.us/img451/2844/img00078kz5.jpg
http://img258.imageshack.us/img258/5986/img00079ny2.jpg
http://img406.imageshack.us/img406/1690/img00080cr2.jpg
http://img406.imageshack.us/img406/1402/img00081kb8.jpg
http://img406.imageshack.us/img406/8479/img00082ss9.jpg
http://img91.imageshack.us/img91/6292/img00083aj8.jpg
http://img204.imageshack.us/img204/5160/img00084ub1.jpg
http://img204.imageshack.us/img204/4282/img00085fx2.jpg
http://img150.imageshack.us/img150/4003/img00086mh7.jpg
http://img480.imageshack.us/img480/9606/img00087rm3.jpg
http://img440.imageshack.us/img440/1898/img00088bn8.jpg
http://img239.imageshack.us/img239/2825/img00089vc9.jpg
http://img440.imageshack.us/img440/6607/img00090jn3.jpg
http://img457.imageshack.us/img457/241/img00091pn4.jpg

There are alot more misc parts I did not capture in these pictures as well...

[Coolwhip]

Quality pictures, including misc. stuff for sale. List was updated.

http://img219.imageshack.us/img219/1664/img0020dj2.jpg
http://img229.imageshack.us/img229/5153/img0021vd4.jpg
http://img70.imageshack.us/img70/24/img0022cm8.jpg
http://img87.imageshack.us/img87/5919/img0023uo2.jpg
http://img87.imageshack.us/img87/2295/img0024qh1.jpg
http://img87.imageshack.us/img87/7027/img0025op6.jpg
http://img160.imageshack.us/img160/3318/img0026hi0.jpg
http://img160.imageshack.us/img160/274/img0027rf1.jpg
http://img57.imageshack.us/img57/1327/img0028vc1.jpg
http://img111.imageshack.us/img111/2753/img0029qs7.jpg
http://img89.imageshack.us/img89/4449/img0030tz3.jpg
http://img143.imageshack.us/img143/1928/img0031et5.jpg
http://img49.imageshack.us/img49/6986/img0032ch2.jpg
http://img143.imageshack.us/img143/8569/img0033ki3.jpg
http://img131.imageshack.us/img131/7029/img0034eb4.jpg
http://img140.imageshack.us/img140/5017/img0036oi7.jpg
http://img141.imageshack.us/img141/8976/img0037le1.jpg
http://img140.imageshack.us/img140/387/img0038gu6.jpg
http://img140.imageshack.us/img140/7281/img0039ya3.jpg
http://img260.imageshack.us/img260/1241/img0040qc0.jpg
http://img77.imageshack.us/img77/2316/img0041fo4.jpg
http://img235.imageshack.us/img235/7716/img0042iv3.jpg
http://img138.imageshack.us/img138/9338/img0043dl6.jpg

[GoodOl'S13]

New RB25DET SYKO mount kit = $560 shipped (PENDING)

Let me know if that falls through, ill pay pal ASAP

[Coolwhip]

Other items are on a pending mode (waiting on payment). As well as few have been SOLD over the weekend.

GoodOl, sorry man they been sold, however the elbow is still available so you may bolt up a SR downipe to your RB.

Let me know

[imotion s14]

uh.. doesn't the SYKO kit come with the elbow??

[Coolwhip]

uh.. doesn't the SYKO kit come with the elbow??

In fact it does. However the person that bought the mounts had no use for the elbow so I parted the kit and sold the mounts to him seperatly.

So in other words the elbow is still available. And the mounts and hardware is sold.

[KlanjacOFF]

Would like to buy your oil pan pending on how beat up it is and also, engine/tranny braces and clutch slave cylinder if you have it. PM me a price

[Coolwhip]

Let me see if I can get you those brackets.

And I don't have a slave available to sale :(

I'll get pics of everything for ya as well.

[KlanjacOFF]

alright thanks, do you still have the crank pulley and stock coil pack cover/ornament available?

[Coolwhip]

The ARC style cover is sold, the crank pulley is sold, however, I do have a RB26 pulley laying around as well for sale.

[KlanjacOFF]

sorry I meant the stock ornament(edited it too late). Will the RB26 pulley work on a 25?

[motronic]

How much of the oem oil cooler, pressure sensor unit here
http://img49.imageshack.us/img49/6986/img0032ch2.jpg

[Coolwhip]

OEM RB25 Coil Pack cover = $30 shipped

Oil Pressure sending unit housing with cooler = $70 shipped

The RB26 harmonic balancer will bolt on but it will need to use different belts, as well as it is alittle deeper than a rb25 pulley, so if its going into a tight fit S-Chassis then you might have clearance issues.

I got pics of the tranny brakets, just email me at Coolwhip(at)tmail(dot)com and I'll reply with the pics.