AP SS lines into r32 caliper?

[5t341tH]

hey guys i just bought some Agency Power SS brake lines for my calipers
it was made for 240sx to 300zx conversions
my calipers are r32 gtst, would that matter?
i put the lines into my calipers but there is still threads left and it feels like it has already bottomed out into the caliper.
heres pics
http://img205.imageshack.us/img205/6250/spa0044cp7.jpg
http://img223.imageshack.us/img223/9500/spa0045ow3.jpg
will this still work fine? or not?
thanks

[projectRDM]

R32 caliper is the same as Z32. It's bottomed out, meaning it's seated.

[5t341tH]

oh quick reply. thank you sir!
so it will work fine and not leak?
thanks again

[projectRDM]

Works beautiful. The extra threaded portion is nothing to worry about.

[Koopa Troopa]

I am convinced all Nissan brake lines are the same... Considering I used my 180 lines on my 33 GTR Brembo's.....

[5t341tH]

dats great :) thanks for your help.
EDIT:
oh i have another question; the bleeder screw on the caliper is rock hard.
i know from experience that when i turn the screw, it opens and i can bleed.
but on my new calipers, when i use my wrench on the bleeder screw it doesnt budge. do i need bigger muscles or is it seized?

[Koopa Troopa]

Use WD40 and a can of M.A.N.