nissan240sxkid
11-01-2007, 07:55 AM
PART OUT!! Nissan SR20DET Engine & 5-Speed Tranny S13
GReddy Tomei Cusco Nismo Tanabe Garrett 2871R 240sx S14
1994 Nissan SR20DET Blacktop Engine & 5-speed Transmission
with many EXTRAS !
CONTACT ME ABOUT PARTING OUT!
WILL: (732) 312-4270
DESCRIPTION:
When I bought this motor back in April 2007 I was able to hand pick it myself, and I installed the complete swap with all the extras listed below by May 2007. This engine is super clean and runs great. I have done several SR20DET swaps and whenever I get a new idea to do something different, I sell off some parts and change my setup. There isn't anything wrong with this setup, just selling because I have other SR engines in my possession and I'm toying around with different setups. This setup for sale was my daily driver, so I did not do any motor work. I never boosted more than 18lbs. This setup made about 350rwhp tuned on AEM, and I honestly want a 400+hp car and with my other parts and engines lying around that will be my next project. I am selling the entire engine bay with the complete exhaust system.
Items Included:
1994 Nissan SR20DET Blacktop with 5-speed Transmission (stock bottom end and stock head)
*painted valve cover included
GReddy: Oil pan, pulleys, intake manifold, oil catch can, RSPL front mount intercooler, suction kit, hot pipe, cold pipe
Tomei: 555cc injectors SOLD, head gasket (new-not installed), exhaust manifold (not installed), 70mm throttle body (installed but not shown in picture), turbo elbow SOLD
HKS: SSQV Blow-off valve, accuator SOLD
Garrett: 2871R Turbo 54 Trim, .64 A/R SOLD
Taka: turbo lines
Brian Crower: Springs and retainers (not installed)
Enjuku Racing: stainless steel exhaust studs
Copper exhaust manifold gasket/ stock exhaust manifold
Cusco: Super single clutch
300zx MAF
Koyo: Radiator
Dual 12" Flex-A-Lite fans
Samco: radiator hoses (Blue)
Nismo: motor/ tranny mounts
Blitz: downpipe
Megan Racing: test pipe
Tanabe: Concept-G Exhaust
I also have for sale:
peakboost mani top mount t3 38mm wastegate
Q45 throttle body
autometer 52 carbon water, egt, volts, oil press, maybe boost and air fuel
few s13 heads
few stock intake manifolds
2871r 56 trim .86 a/r
momo D35 stearing wheel
Greedy e manage harness
sparco evo seats
bride brixII seats
sabet blue 3 points
almost new fat O2
tech edge wide band
s14 block and head
other stock parts
***Things that are NOT for sale are: the shell, AEM EMS and wiring harness, boost controller, AEM Wideband, ARC spark plug cover, GReddy oil cap (I will supply stock one), GReddy radiator cap, GReddy strut brace, DiF Dual Fan Controller, Tanabe suspension, drivetrain, and exterior/ interior pieces.***Unless discussed with me other wise
http://i187.photobucket.com/albums/x59/BabiDollEvo8/CIMG0231.jpg
GReddy Tomei Cusco Nismo Tanabe Garrett 2871R 240sx S14
1994 Nissan SR20DET Blacktop Engine & 5-speed Transmission
with many EXTRAS !
CONTACT ME ABOUT PARTING OUT!
WILL: (732) 312-4270
DESCRIPTION:
When I bought this motor back in April 2007 I was able to hand pick it myself, and I installed the complete swap with all the extras listed below by May 2007. This engine is super clean and runs great. I have done several SR20DET swaps and whenever I get a new idea to do something different, I sell off some parts and change my setup. There isn't anything wrong with this setup, just selling because I have other SR engines in my possession and I'm toying around with different setups. This setup for sale was my daily driver, so I did not do any motor work. I never boosted more than 18lbs. This setup made about 350rwhp tuned on AEM, and I honestly want a 400+hp car and with my other parts and engines lying around that will be my next project. I am selling the entire engine bay with the complete exhaust system.
Items Included:
1994 Nissan SR20DET Blacktop with 5-speed Transmission (stock bottom end and stock head)
*painted valve cover included
GReddy: Oil pan, pulleys, intake manifold, oil catch can, RSPL front mount intercooler, suction kit, hot pipe, cold pipe
Tomei: 555cc injectors SOLD, head gasket (new-not installed), exhaust manifold (not installed), 70mm throttle body (installed but not shown in picture), turbo elbow SOLD
HKS: SSQV Blow-off valve, accuator SOLD
Garrett: 2871R Turbo 54 Trim, .64 A/R SOLD
Taka: turbo lines
Brian Crower: Springs and retainers (not installed)
Enjuku Racing: stainless steel exhaust studs
Copper exhaust manifold gasket/ stock exhaust manifold
Cusco: Super single clutch
300zx MAF
Koyo: Radiator
Dual 12" Flex-A-Lite fans
Samco: radiator hoses (Blue)
Nismo: motor/ tranny mounts
Blitz: downpipe
Megan Racing: test pipe
Tanabe: Concept-G Exhaust
I also have for sale:
peakboost mani top mount t3 38mm wastegate
Q45 throttle body
autometer 52 carbon water, egt, volts, oil press, maybe boost and air fuel
few s13 heads
few stock intake manifolds
2871r 56 trim .86 a/r
momo D35 stearing wheel
Greedy e manage harness
sparco evo seats
bride brixII seats
sabet blue 3 points
almost new fat O2
tech edge wide band
s14 block and head
other stock parts
***Things that are NOT for sale are: the shell, AEM EMS and wiring harness, boost controller, AEM Wideband, ARC spark plug cover, GReddy oil cap (I will supply stock one), GReddy radiator cap, GReddy strut brace, DiF Dual Fan Controller, Tanabe suspension, drivetrain, and exterior/ interior pieces.***Unless discussed with me other wise
http://i187.photobucket.com/albums/x59/BabiDollEvo8/CIMG0231.jpg