PDA

View Full Version : Alignment shops in/near Gardena?

JGON85
10-30-2007, 01:45 PM
My 95 s14 has been suffering from the jitters and I need to take it to get it checked out. Any shops near Gardena?

The main issue is cruising on the freeway from 60mph-70mph I have a lot of wheel jittering, but after 70 it reverts back to normal. I've checked for any improperly tightened lug nuts but still nothing. A buddy of mine said that I might have a damaged control arm. But I don't remember any instance in which it could have been damaged.

Also what service does my 95 s14 need at 79000 miles?
mayco_86
10-30-2007, 01:52 PM
My 95 s14 has been suffering from the jitters and I need to take it to get it checked out. Any shops near Gardena?

The main issue is cruising on the freeway from 60mph-70mph I have a lot of wheel jittering, but after 70 it reverts back to normal. I've checked for any improperly tightened lug nuts but still nothing. A buddy of mine said that I might have a damaged control arm. But I don't remember any instance in which it could have been damaged.

Also what service does my 95 s14 need at 79000 miles?

check for wheel balancing that might do the trick
usdm180sx
10-30-2007, 02:01 PM
west end alignment off vermont and 190th Darrin is the man
Jbma327
10-30-2007, 02:03 PM
check your tie rod ends for play. Other then that you probably need to get your tires re- balanced.
drift into a curb
10-30-2007, 02:14 PM
It's none of those. Check your tension rods. Most likely the bushing is shot. Get under the car and look at the rubber bushing that connects your tension rod to the bracket

lower control arm and tension rod (bushing is in the very bottom right corner)
http://www.devster.net/roni/web/m30_files/image026.jpg
sideview_180sx
10-30-2007, 05:02 PM
west end alignment. hiro's auto repair. all are good shops.
-you should start with wheel balancing. if that doesn't fix it.

-tension rods bushing check. still have problems.

-check for bolts that maybe loose. still have problems.

-something is bent, either an arm or the frame.
s13gold
10-30-2007, 05:04 PM
west end alignment off vermont and 190th Darrin is the man

Norm is dead on.


yup. LOCK THIS SHIT UP.

done. done. and done.
ManoNegra
10-30-2007, 06:14 PM
Also make sure your suspension bolts are tight - after checking everything else mentioned.
ThatGuy
10-31-2007, 05:13 AM
This should have been posted in Regional.

:lockd: