Log in

View Full Version : SR20 won't start????


bobbyhill
10-29-2007, 04:45 PM
I tried starting my SR the other day and when you turn the ignition to try to start it clicks and doesn't start. The starter checked out good at AutoZone. I checked all grounds, fuses under dash and underneath hood and everything seems to be good. Is there any other switches or fuses that I need to check??? Thanks

EAT Motorsports
10-29-2007, 06:18 PM
Sounds like a dead battery to me.

sr20boostn20
10-29-2007, 06:20 PM
yea, clicking is like you have enough power for accessories, but not the motor

2bad240
10-29-2007, 06:39 PM
dead battery, or bad wiring.

bobbyhill
10-30-2007, 06:07 AM
Sounds like a dead battery to me.
i tried jump starting it and it didn't work

mayco_86
10-30-2007, 07:39 AM
It might be that your alternator is no good and your car was running with nothing but the battery and the battery got drained and this whats not letting your started get enough juice.

bobbyhill
10-30-2007, 05:56 PM
[quote=mayco_86;1617042]It might be that your alternator is no good and your car was running with nothing but the battery and the battery got drained and this whats not letting your started get enough juice.[/quote
we put a voltage meter on the starter and it reads 12 volts when you try to start it

Gjohnson7
10-30-2007, 06:20 PM
I'm having the same issue trying to start my SR for the first time after install. I think my problem might be grounding, you might check that out.

bobbyhill
10-30-2007, 06:24 PM
I'm having the same issue trying to start my SR for the first time after install. I think my problem might be grounding, you might check that out.
is there any diagram to show were are all the grounds are on s13 blacktop sr

Gjohnson7
10-30-2007, 06:42 PM
Do a search for a SR FSM and go to the EL (electrical section)

I downloaded the S14 SR FSM. I think there is a link in the SRfaqs.

jskateborders
10-30-2007, 07:41 PM
corrosion on the battery terminals

GabeS14
10-31-2007, 01:52 AM
i had corrosion on the alternator wire,(main power cable) and it woudl do the same thing, i wiggled it around to break some loose and it started right up, check the grounds, then check the alternator wire