JDM S13 front clips for sale $1900~2700

[davies2k]

Hey gang,
We just recieved a large shipment and preparing for one more this coming Monday.. The following is a site with pics of some of the goodies we have in stock.

http://briefcase.yahoo.com/bc/dealoha/lst?.dir=/JDM+Recycler+Inventory

If there is something you did not see, let us know what it is and i'm sure we can prolly find is somewhere. clips start at $1900 for red's and $2100 for Blacks. Avg. is 40,000 kilometers to 80,000 Kilometers.

We also have 5 silivia front clips ready for shipping. Prices start at $2500 for full front clip for silvia conversion. Call me direct with any questions.
714.713.1749

David N.

[rancid240]

davies i dont have the money to buy a clip yet, or the need too, but i just want to thank you for bringing in clips and having great prices.

[adey]

Holy wow! Although I don't have the cash either (actually, I do, but I'm going with suspension before engine... call me crazy! ) I have to give you guys at JDM Recycler two BIG <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'> for bringing this kind of good stuff to us. Top notch stuff... and again guys, I can vouch for this guy's validity as I've been to the warehouses and seen the hardware.

Also-- I hope to put you in touch with a friend of mine who's looking for a DC5 type R engine, so expect to hear from me in a few days. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

[b18c1ek]

Dave,
Do you have any Silvia front clips with the body panels intact as well? I am planning on doing a full S13 Silvia engine and front end conversion... please let me know.

Thanks,
Please email me at:
[email protected]

[adey]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Sep. 18 2002,11:20)</td></tr><tr><td id="QUOTE">We also have 5 silivia front clips ready for shipping. Prices start at $2500 for full front clip for silvia conversion. Call me direct with any questions.
714.713.1749</td></tr></table><span id='postcolor'>
I assume this (quote) means it includes body panels.
Or by "silvia conversion" did you (david) mean convert to RHD and not necessarily with panels?

[davies2k]

Adey~ again thnks for the vouche. &nbsp;I have two DC5 type R clips in stock. &nbsp;Also have the new Civic type R clip as well. &nbsp;Let me know how I can help your friend. &nbsp;BTW, did you see our DC 5 type R car on your last visit to us?

B181~ &nbsp;I have three full silvia clips in stock. &nbsp;I have one is near perfect condtion with very low mileage. &nbsp;The other two are in good condition. &nbsp;I will have a shipment coming in this monday so silvia clips will be abundant. hehehe ... now i want to convert to sileighty.... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

Again, thanks for reading my post.
David N.

[TheTicTac]

How much is shipping to norcal typically?

[davies2k]

Shipping to No. Cal will prolly run around $500 for everything. &nbsp;I have a 3rd party shipping and compression testing, which is all included in the purchase.

[Crab Spirits]

PM sent. Thanks again for the "non-bendover" pricing.

[kojiosuna]

HI ..
This is koji... I would like to get your e-mail David N. I want to talk further about potential purchases. I need 1 sr20det black top clip for a s14. Give me the price for both the red top and black top. IF red top please let it be s13 with lights panels etc. No major dents to the point where I have to throw away the panels and or I have to take the panels for major body work.
e-mail me at
[email protected]
I will try to call but no garantee.

[adey]

Yes, I saw the DC5... it's beautiful! I imagine it's chock full of JIC-magic parts too, eh? &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> &nbsp;
Since you guys seem to be importers of JIC-magic, this seems a fitting question for you-- Do the FLT-A2 coilovers have an optional "circuit-spec" spring rate? I'm under the impression that regular FLT-A2 springrates for S13 are 7k/5k f/r.

[b18c1ek]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Sep. 20 2002,03:28)</td></tr><tr><td id="QUOTE">B181~ I have three full silvia clips in stock. I have one is near perfect condtion with very low mileage. The other two are in good condition. I will have a shipment coming in this monday so silvia clips will be abundant. hehehe ... now i want to convert to sileighty.... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'></td></tr></table><span id='postcolor'>
Dave,
Please email me a price on a full Silvia front end conversion in good to perfect shape, with both fenders, hood, bumper, headlights, radiator support, etc.
Thanks <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

[davies2k]

Adey~ &nbsp;I believe the FLT A2's come with 8/6 k spring rates. &nbsp;I know that John at JIC will be able to order what ever spring rates you desire . &nbsp;He is awesome at suspension setups. &nbsp;

B18C1ek~ I sent you an email. &nbsp;I currently have another gentelman asking about the same clip so please let me know what you prefer. &nbsp;

We just blew two motors this weekend racing, &nbsp;so part are avail to anyone needing SR engine parts. IE. .. head, turbo, h2o pump, etc....

David N

[highpsi]

just wondering where you are located? &nbsp;I don't think I saw where you were located in the post.

also please email me davies2k, I have some questions about the clips.....thanks a lot!!

[email protected]

[exitsanity]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (highpsi @ Sep. 21 2002,2:01)</td></tr><tr><td id="QUOTE">just wondering where you are located? I don't think I saw where you were located in the post.

also please email me davies2k, I have some questions about the clips.....thanks a lot!!

[email protected]</td></tr></table><span id='postcolor'>
from the area code he listed (714), I'd assume Orange County, or near there (SoCal)

[fast-datsun]

If the Silvia clips have good sheet metal and lights with bumper call me... &nbsp; 619-449-4748 ask for Walter... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sigh.gif" border="0" valign="absmiddle" alt=':rolleyes:'>

[adey]

Yes, David's in Socal... Off the 60fwy somewhere, but I forget. Montbello was it?
Anyway.

David, when's a good time for me to get in touch w/ you? I have questions re: the DC5 clip, JIC majic suspension and a note about the hood I've been meaning to pick up.
I assume you will not be working (at the shop) today (sat) or tomorrow (sunday).

Feel free to drop me an email or PM.
<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>
-AD

[davies2k]

Hey Adey,
Call me anytime about your questions, I never stop working. &nbsp;If it's not cars then it's cell phones. heheh.
David N.

[erbs45]

hey dave, im interested in a silvia conversion, but only need headlights ( 2 projector ), brackets, hood and fenders. &nbsp;do not need the grill, or bumper unless you have the rare silvia K's AERO bumper.
let me know how much. &nbsp;also what your email address?
thanks edward

[SxMachine]

Beautiful engines, great prices. &nbsp;I'll be buying a s13 clip soon i'll keep u in mind.

[davies2k]

Erbs45~ my email is [email protected] &nbsp;Please either email or call me direct with questions.

Sxmachine~ Thanks for the visting my pictures. &nbsp;Please let me know if I can be of further assistance.

**UPDATE** We just recieved our most recent shipment. I will try to update some pics. &nbsp;If any of you guys/gals have friends that need JDM HOnda swaps I have over 50 B16 and B18 swaps avail.. $800+shipping for B16.....

Regards,
David N>

[silviase]

WOW! that is the largest shippment of silvia front clips I've
ever seen. hey dave where do you live man. I would love
to pic one of these clips up or have it shipped.

[davies2k]

Silvease~ I am in the Los Angeles area. &nbsp;Please give me a call for more information. &nbsp;We just recieved more clips updates to be posted.

[Yoshi]

Davies2k,
does your shop do installs as well? &nbsp;i"m assuming so, considering the amount of clip you guys have, damn! &nbsp;Very impressive! &nbsp;How much for installs?

[sayuki]

Hey there,

Right now I'm looking for s13 silvia front fenders. Do you have any/sell them seperately from clips etc.? &nbsp;

Also, do you ever get any of the old school j-spec rims?

[davies2k]

Yoshi~ &nbsp;Yes, We do complete installs. &nbsp;Basically, you drop off your car in the morning pickup by 5pm same day and that's it. &nbsp;Cost is $1200 for basic install. &nbsp;

Sayuki~ I have a pair of fenders avail. &nbsp;Asking $375 since these are very hard to find sold seperately. &nbsp;

David N.

[Yoshi]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Sep. 26 2002,11:04)</td></tr><tr><td id="QUOTE">Yoshi~ Yes, We do complete installs. Basically, you drop off your car in the morning pickup by 5pm same day and that's it. Cost is $1200 for basic install.

Sayuki~ I have a pair of fenders avail. Asking $375 since these are very hard to find sold seperately.

David N.</td></tr></table><span id='postcolor'>
Davies: wow, that's really fast... actually, that's kinda scary fast... but you said basic install

do you have a website for your shop I can check out? I hate to bother you with so many questions if I could check myself, but I have family right in that area, and I'm planning on either doing a blacktop (s14) swap to my 13, complete with FMIC, BOV, etc &nbsp;OR buying a 3000GT VR4. It's not an easy choice <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

Do you have an email address I could write to? I got lots of questions. &nbsp;thanks man

[davies2k]

Yoshi~ At the moment we are developing at website. you can check out some pics on the link posted at the begining of this thread. You will find prices and pictures on the link.

The best way to have all your questions answered is to call me direct on the telly (714.713.1749).

MY $.02 keep the S13, do and SR swap and your face will look like this everyday going sideways:D <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>.

The VR-4 is a great car but the S13 just make me wanna take every turn sideways. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'>

David.

[SR20Fastback]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Sep. 26 2002,9:09)</td></tr><tr><td id="QUOTE">Yoshi~ At the moment we are developing at website. you can check out some pics on the think posted at the begining of this thread. You will find prices and pictures on the link.

The best way to have all your questions answered is to call me direct on the telly (714.713.1749).

MY $.02 keep the S13, do and SR swap and your face will look like this everyday going sideways:D <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>.

The VR-4 is a great car but the S13 just make me wanna take every turn sideways. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'>

David.</td></tr></table><span id='postcolor'>
damn stop making me want to keep my car. Such hard decisions, but damn... how in gods name do you install the SR in such short time?

Theoreticly (lol) if I were to drive down from my residence in Washington... and take my car to your shop, you do the swap in the day, is that going to be guarenteed or anything like that? Assuming maintence is very well taken care of, and the engine isnt being abused? Do you replace the belts and fluids and what not?

You seem very proffessional, and you show it strongly through your detailed and heart filled (dunno why thats there?). Well it seems as if it would be worth the trip to LA for your expertise of the SR.

I will hopefully be in contact with you shortly. For some reason something drastic happens (i.e you get close to running out of SR's and wont order more) please contact me through PM... I may be able to get the money...

Allan

[kanekz]

David,

Can you get a S14 front clip (Blacktop)? If so, is it going to be coming from a Zenki or Kouki S14. What will be the price? &nbsp;Will the S14 front clips be coming with body panels too? &nbsp;Thanks.

Mike

[davies2k]

Kanekz~ &nbsp;At the moment we do not have any S14's in stock. &nbsp;I will have some on the next shippment due in two weeks. &nbsp;


****UpDate*** most &nbsp;of the S13 clips have been sold <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> , I have one very clean clip left. &nbsp;It is the clip #13 on my link. &nbsp;If anyone is interested in more clips I have access to only five more clips at another warehouse. &nbsp;Please let me know if you guy/gals are interested. &nbsp;Next, shipment is in Two weeks, I can take pre-orders , you will save $150/clip if you pre-order....
David N.

[wpayne]

Davies, How long will you guys be providing this service? I'm planning on doing an SR swap but can't 'till January. Will you guys still be importing engines at that time?

If I buy a whole clip, do I have to spend money on any other parts that may be needed can everything from it be used(ie:intercooler, powersteering pump,fuse box, etc...)? Oh, by the way, I have an S13 Hatchback.

[Crab Spirits]

(Giggles) One of those clips is mine. I can't wait. Soon...... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'>
Thanks for the great service Dave.

[Crab Spirits]

Hey Dave, do you think you could import some R32 Skyline GTS-t clips (I belive this is the model without AWD and RB26DETT)? I have a few z-buddies interested in RB swaps. Could you give a ballpark figure on that?

[davies2k]

Wpayne~ my intention of opeing JDM Recycler is to continue to offer the best wholesale direct pricing. &nbsp; I have a 5 year lease on my building so January should'nt be a problem for us to find you a clean clip. &nbsp;Please give me one weeks notice before you are ready. &nbsp;I will ensure everything is perfect for you... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

Crab Spirits~ &nbsp; "kojiosuna" koji and some friends drove over 6hours from San francisco to see you clip neatly sitting in anticipation of being shipped out to you. They wanted a Silvia clip but you got the last one. &nbsp;I'll notifiy you of any shipping date I may have.

kojiosuna~ Thanks for visiting JDM Recycler today all the way from the bay area. &nbsp;I hope the parts you picked up will help your car make it to one of our track events. &nbsp;let Ken know that I will put him on the list for the next Silvia shipemnts. &nbsp;

I have one S13 black top for sale if anyone is interested. &nbsp;Has 88km was sold to local customer but he decided on an S14 swap instead. It's up for graps for $2600 complete swap...

david N.

[davies2k]

Almost forgot,

Crab Spirits~ &nbsp;Can you check on the exact engine code (ex.. RB25dett ....) &nbsp;If you can provide me with that information I can check with Japan and see pricing. &nbsp; Hopefully, we can sqeeze what your looking for in the next container. &nbsp;I can take special orders but will require a deposit to insure timely delivery from Japan.

David n>

[adey]

The R33 and R34 GTS-Ts came with the RB25DET. Only R32, 33 and 34 GTRs came with the RB26DETT.

The R32 GTS-T is RWD with the RB20DET.


edit: David, thanks for the hospitality today! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> Tom was great to watch, and I can only imagine what it must have been like to sit in the passenger seat (like Jacky did)! I've been having putting the susp. in because I forgot to rent spring compressors (duhhhh!<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> and will hopefully finish up the install tomorrow (this) morning. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

[davies2k]

Adey~ if memory serves me right you will not need a spring compressor to install the JIC Magics. &nbsp;Simply remove the stock struts and re-install the new JIC's . they will easily fit since the coilover setup is naturally lower then the OEM struts. &nbsp;Give me a call if you have any trouble installing.
David N.

[SR20Fastback]

David-

It seems that you have container ships from japan delivering your clips, do you put anything else in these containers... maybe some brides? hah Just wondering, might be a nice present to go along with the SR. Im hoping to road trip it from WA either around thanksgiving or when I get out for Xmas break I believe the 2nd week maybe 3rd of December. This one day SR install just sounds too good to pass up, and I look forward to that date. Do you do anything to guarentee running, by this I mean replace belts, fluids, make sure everything is clean and running?

Thanks,
Allan

[adey]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Sep. 29 2002,11:22)</td></tr><tr><td id="QUOTE">if memory serves me right you will not need a spring compressor to install the JIC Magics. </td></tr></table><span id='postcolor'>
thanks for the tip -- I didn't need spring compressors to install the JICs (rather, the 1 damper I have in so far! ) &nbsp;but I will probably need it to take out the stock springs/shocks.
The JICs are *sexy* .... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'>

[saga240]

hey david are there any tours of JDM recycler on saturdays.. hah like more specifically next saturday?!@.. hah i finally have a day off then and thought id like to go up there and check it out..

-james

[adey]

I can't speak for David and JDM recycler, but I do believe they're open on saturdays. They were open this saturday, at least, and one of the owners I spoke to said that yes, they are (usually) open Saturdays.

Hey David, I've got a few Q's for you re: taking out the old suspension (I'm completely and utterly stumped... and frustrated) -- if I haven't worked out my &nbsp;big glitch by monday, I'll give you a call. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

[wpayne]

Hey davies, I'm looking forward to an SR swap this winter. I'll let you know when I'm ready. How long does it take to get engines. For example, if I wanted to get an S14 SR20DET.

Oh, one more question, if we just pay the $1200 for the install and buy a clip, will you have the car up and running in perfect shape for that price?

Thanks

[davies2k]

Saga~ We are usually open on Saturday's, but this week we will be out at the racetrack for the SCCA regionals. If you can stop by some time during the week it will be best. I used to go to a korean club called Saga... I miss the ole days... Unlimited booze and foxy ladies.. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'>

Adey~ give me a buzz anytime if your stuck on your efforts to install the JIC'S. Should be a simple 17 or 19 mm on the bottom and Two 14mm on top. It should slide right under the car.... lemme know

Wpayne~ In "MOST CASES" $1200 for the install should suffice for a basic install IE.. engine swaped in and running. AC is extra since it requires some wiring and welding.... As for as being in "perfect shape," I'm not certain what you are referring too. Most of the cars that leave the shop, will start, boost, and sometimes an occassion celebration drift in the parking lot( at discretion of vehicle owner), but beyond that i'm not sure what else we can do to insure perfection. We have at least 4 container/month so availability is not an issue. Your payment for the clip is the determining factor for timely delivery. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

*** I will have 5 more SR clips avail this Monday.. Please call to reserve your SR motor.. B16A are still on special pricing at $900 for complete swap. Call for other honda inquiries I have ton's in stock.***


Regards,
David >

[shawya]

I am very interested in a Sylvia clip (or complete motorset if that's cheaper, since I'm just a poor college student) for an S13 Fastback, especially at that $1900 price. I tried emailing you, but didn't hear back, so figured I'd post. Hit me up with info on the cheapest ones you've got or are going to get, as well as what shipping would be to area code 206 (seattle). If shipping to a dock or other nearby city decreases shipping that'd be great, too. Any help would be great, so thanks in advance. My email is [email protected]

[wpayne]

Thanks Davies. Your description of the cars leaving was good enough:). So I wouldn't have to pay extra for a downpipe or intercooler? Just want to get all the facts.

Also, I would like an SR20DET from an S14, preferably a whole front clip with as low mileage as possible. And is there any way to prove how many miles were put on the engine?

How much do you charge to get the A/C up and running?

Finally, when I reserve a clip, what do I have to do and how much of a down-payment do you require?

Thanks!

[adey]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (wpayne @ Oct. 01 2002,3:55)</td></tr><tr><td id="QUOTE">Thanks Davies. Your description of the cars leaving was good enough:). So I wouldn't have to pay extra for a downpipe or intercooler? Just want to get all the facts.

Also, I would like an SR20DET from an S14, preferably a whole front clip with as low mileage as possible. And is there any way to prove how many miles were put on the engine?

How much do you charge to get the A/C up and running?

Finally, when I reserve a clip, what do I have to do and how much of a down-payment do you require?</td></tr></table><span id='postcolor'>
Let me see what I can answer for JDM Recycler... I hope you don't mind, David. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'>

1) You don't have to pay extra for IC and DP IF they are intact and useable on the clip. that's why it's so important to put your deposit down early, and get the low-mileage, good-shaped clips when they come in.
If IC and DP are missing/broken, you will (I imagine) have to source them yourself.

2) The Front Clip comes with dash board and gauge cluster -- you can see for yourself how many miles are on the engine/tranny! Unless you mean actual, PHYSICAL travelled distance -- in which case you'd figure in the distance from Japan to wherever you are. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

--I'll let david answer #s 3 and 4.

[wpayne]

thanks adey:)

[Phlip]

Are you able to just sell body parts also? If so, I am trying to get my hands on the JDM S14 lights (not the MCS14, not my fancy)

[davies2k]

Adey~ your answers couldn't be any better . &nbsp;Thanks!!!!

Wpayne~ To have the Ac up and running there will be an extra $200 charge to re-weld some of the piping and wires. &nbsp;As for down payment, I would like to see at least half the price of the clip. &nbsp;Lets take on average $2000/clip. &nbsp;I would like to have $1000 as a deposit. &nbsp;In the past we have brought over various clips at customers requests and were stuck with them for over 6months because the customer backed out. &nbsp;If we have your deposit you will be insured of having Premium choice clips. &nbsp;

Shaway~ as far as prices go, it veries with every shipment. &nbsp;Since currency fluctuate so to the prices of each clip.. &nbsp;If you are seriously interested I can reserve a cleaner clip at the price you are inquiring about. &nbsp;Again, if deposits are made early I will offer a $150 discount!!!! &nbsp;Shipping is around $500~700 to your zip code. &nbsp;

Phlip~ At the moment we are completely sold out on S14 goodies. &nbsp;They are usually the first to be sold since they are so limited. &nbsp;

Thanks for reading my posts,

David N.

[wpayne]

Thanks davies. I won't be able to make a downpayment 'till atleast December. Hopefully you'll get a shipment of nice clips around that time:)

Thanks!

[shawya]

Thank you very much Davies. I should be calling you up shortly to talk more specifically about what you'll be getting in stock and hopefully putting in an early deposit so I can get that discount!

[nismo013]

Great prices.. &nbsp;Tried to email you but you acct is full. &nbsp;Anyways just wondering if you still have a sr20det front clip for sale and if so how much shipped to 97224.

Thanks for your time
Patrick Lynch
[email protected]

[davies2k]

Nismo013~ Yes, I still have three clips avail. Please call me for pricing and any other questions you may have. 714.713.1749
David n

[nismo013]

David looks like everything is a go! &nbsp;I should be down there late. late Thursday maybe very early Friday. &nbsp;I'm planning on bringing in my car Friday Morning to drop it off. &nbsp;Can you please email me with your shops address and/or contact info?

Thanks
Pat Lynch
[email protected]

[davies2k]

Perfect Pat!!!!

We'll have the motor pulled from the clip thurs. evening. &nbsp;You should be boosting friday nite. &nbsp; <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> I hope you have a safe drive down. especially with a trailer.

David N.

[Crab Spirits]

:crazy:Ahhhhh! Davey!
All this talk is making me all antsy! What's going on with my clip?!

[davies2k]

Crap Spirits~
Your clip left this past Thursday. Hopefully, you will see it by Wednesday.. I will have a tracking # for you on Monday.. Your Blitz downpipe is in the shipment as well.

BTW,Compression was over 180 psi!!!!! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/alien.gif" border="0" valign="absmiddle" alt=':alien:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/turn.gif" border="0" valign="absmiddle" alt=':turn:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> l

***I have one Black top and one red top avail. &nbsp;Low mileage.*** &nbsp;Asking $2600 take your pick

Call me with any questions.
David N.

[SR20Fastback]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Oct. 13 2002,12:37)</td></tr><tr><td id="QUOTE">Crap Spirits~
Your clip left this past Thursday. Hopefully, you will see it by Wednesday.. I will have a tracking # for you on Monday.. Your Blitz downpipe is in the shipment as well.

BTW,Compression was over 180 psi!!!!! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/alien.gif" border="0" valign="absmiddle" alt=':alien:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/turn.gif" border="0" valign="absmiddle" alt=':turn:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> l

***I have one Black top and one red top avail. Low mileage.*** Asking $2600 take your pick

Call me with any questions.
David N.</td></tr></table><span id='postcolor'>
Both S13? How low of mileage?

[Crab Spirits]

(In Mr. Burns tone of voice) Excellent. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/devil.gif" border="0" valign="absmiddle" alt=':devil:'>

[davies2k]

SR20FASTBACK~ the black top has 85km redtop has 62km. &nbsp;the body is near perfect on both of them. &nbsp;
David N.

[Fastem]

Been lurking the forums for a while finally decided to post...

Anyway Davies my step brother is gonna be wanting a b16a and your considerably cheaper then anywhere so Ill let him know about you.

And on to my question - I am thinking of doing an sr20 swap into my 240sx and was also thinking of doing the silvia front end conversion , do your clips have the body panels/ lights for that too? &nbsp;

AND When I will be buying this if I give you enough notice would it be possible to get a lower mileage motor and if at all possible try to match close to the color I have? Just curious on that one.

You can email me at [email protected] I also wanted to know how much shipping would be to 97055 . Thanks alot.

[davies2k]

Fastem~ First of all, Welcome Zilvia.net. &nbsp;I'm sure you will and have gained a wealth of knowledge on this forum..... &nbsp;I have about 15~20 Silvia clips coming.. I am not sure which shipment they are in due to the recent port strikes.... They will include near perfect body panels and lights. &nbsp;Please let me know what color you would like and we can possibly set one aside for you. &nbsp;

Please reach me at 323.356.0523 for any questions you may have. &nbsp;This is my temporary cell #, my other cell # will be up in a few days. &nbsp;If anyone see's a Flashing Nextel I 90 on Ebay please let me know since it's the one someone stole from me this past weekend...gurrrrrr <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

David N.

[CoasTek240]

wow.. that's amazing.. i wish u were selling like this in march when i bought mine from srswap(recently sold it though). oh &nbsp;well...i'll contact u later when i get a 240. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/baaa.gif" border="0" valign="absmiddle" alt=':baaa:'> this sux
FWD makes me wanna kill my self

[S14lover]

Dave you are the golden goose my friend!!!!!.....i am in the market to buy a Sr20 in DEC its my christmas gift to ME dammit and i was looking for a redtop now mind you i am putting it into a S14 so i will not require the qtr panels and the like so hopefully you can give them (sell) to someone out there. And just for laughs please let me know how much a S14 blacktop would be (VVT right?) also shipping it to 31905 (GA) is gonna cost me huh? oh well email me at [email protected] P.S. you got a military discount? &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> &nbsp;jk

[NismoElzo]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Sep. 19 2002,01:20)</td></tr><tr><td id="QUOTE">Hey gang,
We just recieved a large shipment and preparing for one more this coming Monday.. The following is a site with pics of some of the goodies we have in stock.

http://briefcase.yahoo.com/bc/dealoha/lst?.dir=/JDM+Recycler+Inventory

If there is something you did not see, let us know what it is and i'm sure we can prolly find is somewhere. clips start at $1900 for red's and $2100 for Blacks. Avg. is 40,000 kilometers to 80,000 Kilometers.

We also have 5 silivia front clips ready for shipping. Prices start at $2500 for full front clip for silvia conversion. Call me direct with any questions.
714.713.1749

David N.</td></tr></table><span id='postcolor'>
Hello

What area are you from??? canada or the us? &nbsp;cuz if thats canadian dollars thats not bad. &nbsp;I am getting a group buy deal here from this place, front clips s13 redtops for 2200cdn! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> so let me know if ur located in canada <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> &nbsp;and maybe i'll get them from you.

THanx

Elzo

[adey]

errr "nizmoelzo" (what's 'nizmo'?) &nbsp;if you bothered to read any of this thread, you'd realize that he was located in Southern California. All prices are in USD. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/dozingoff.gif" border="0" valign="absmiddle" alt=':zzz:'> &nbsp;

S14lover -- AFAIK, no SR20DETs had variable valve timing in the VTEC/VVTL sense; they had some sort of variable cam timing or something like that.
However, the new(ish) SR20VE has variable valve timing.

[Yoshi]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (adey @ Oct. 15 2002,03:03)</td></tr><tr><td id="QUOTE">S14lover -- AFAIK, no SR20DETs had variable valve timing in the VTEC/VVTL sense; they had some sort of variable cam timing or something like that.
However, the new(ish) SR20VE has variable valve timing.</td></tr></table><span id='postcolor'>
Um... no, s14 SR's had VVT like he says.
Here's a lil paste from heavy throttle:


Horsepower: &nbsp;220hp at 6000rpm &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;Torque: &nbsp;203 ft/lbs at 4800rpm

Turbo specs:

&nbsp; &nbsp; &nbsp; &nbsp;Compressor: T-28, 60 trim 60 mm BCI-1 compressor in T-04B housing

&nbsp; &nbsp; &nbsp; &nbsp;Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.

&nbsp; &nbsp; &nbsp; &nbsp;Center Section: Ball Bearing



Variable valve timing system and a different turbo are the significant changes from the S13 SR20DET engines. &nbsp; S14 uses 'low port' intake design vs. S13 'high port' design.

[the3SecondJerk]

Adey-
I don't read nizmo anywhere...it says Nismo(nissan motorsports &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> ) followed by his name. Don't need to be rude to the guy.

[S14Dreaming]

I'm looking for a pretty good condition S14, clip or just engine. &nbsp;I know that these are good deals, and I am just wondering what I can expect to get either of these for. &nbsp;Also, my friend is planning on going frankenstien on his civic with a 2.0 litre block from a CRV. &nbsp;My qusetion is, do you import these also? &nbsp;Thanks a lot. &nbsp;-BEN
[email protected]

[davies2k]

S14Dreaming~ &nbsp;We usually import only front clips, only because they are usually in the best condition and include all the neccessary parts to complet a full swap. &nbsp;Please call me for pricing. &nbsp;I should have a shipment in two weeks (crossing fingers). &nbsp;As for a Frankenstien motor we do these swaps on a daily basis. &nbsp;Again call me for details. &nbsp;My temp. # is 323.356.0523. &nbsp;
david N.

[Tyler Durdan]

damn...one day installs...nice.

I am interested in a s14 sr20det for my 97. &nbsp;I am shooting for december, so how could I gurantee to get it done. &nbsp;I would be coming from Texas on my winter break from college...luckily my aunt will let me borrow one of her condos. &nbsp;How much extra will it be to get the ac, power whatever hooked up? &nbsp;Also, do you gurantee the engines in anyway? &nbsp;And when you said $2600 earlier for the sr...does that include install?

Also, sr20fastback...when are you going to go out there...setup a date to meet a fellow zilvia member from WA...plus...free room at the condo if you want to save some cash.

[MasterOFDrift]

Dave wondering if you import Ca18DET front clips!! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> any prices on these would be helpful thanks!!!

[Crab Spirits]

Dave, tried calling your cell but it wasn't working.
I got the clip today, the body parts don't look like they made it through the trip so well. I guess that's understandable though. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sarcasm.gif" border="0" valign="absmiddle" alt=':sarcasm:'> The hood got flattened pretty good. Do you have another one you could hook me up with?

I am missing some parts too. I am missing:
corner lights
intercooler assy w/recirc valve
pipe from IC to throttle

On the plus side, the clip came with an intact 3" downpipe on it already. Since I don't really need the blitz DP, maybe we could work out some kind of trade for a aftermarket blowoff valve you might have or something? Give me a call when you have a chance.

[SR20Fastback]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Tyler Durdan @ Oct. 15 2002,9:28)</td></tr><tr><td id="QUOTE">damn...one day installs...nice.

I am interested in a s14 sr20det for my 97. I am shooting for december, so how could I gurantee to get it done. I would be coming from Texas on my winter break from college...luckily my aunt will let me borrow one of her condos. How much extra will it be to get the ac, power whatever hooked up? Also, do you gurantee the engines in anyway? And when you said $2600 earlier for the sr...does that include install?

Also, sr20fastback...when are you going to go out there...setup a date to meet a fellow zilvia member from WA...plus...free room at the condo if you want to save some cash.</td></tr></table><span id='postcolor'>
hell yeah man, I'll let you know. Definately sometime like 2nd week or 3rd for my trip. I heard the mt's (cant remember name) that you go in through I-5 that are at the very northern border get bad snow wise in the winter. Sooo more fun for me <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[Tyler Durdan]

Let me know...it's a sweet ass condo right on Huntington Beach (right on PCH), and the other one is just up the road in Long Beach (right on PCH again facing the ocean. The Huntington Beach one will be the one I try to score...badass condo facing the beach with hotties in and out of the place. My aunt's comin in to town today, then off to Antartica or Russia...can't remember. But I'll check with her to see if it's cool...more than likely she will give up one of the condos.

[adey]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (sidewayzCA18 @ Oct. 15 2002,1:23)</td></tr><tr><td id="QUOTE">I don't read nizmo anywhere...it says Nismo(nissan motorsports <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> ) followed by his name.</td></tr></table><span id='postcolor'>
I went back and looked closely.. you're right!
Apologies for the groundless remark. &nbsp;I was looking desparately for something to attack the guy with... OTOH not reading a post and responding to it asking what it's about is pretty poor forum etiquette.

[SR20Fastback]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Tyler Durdan @ Oct. 16 2002,3:21)</td></tr><tr><td id="QUOTE">Let me know...it's a sweet ass condo right on Huntington Beach (right on PCH), and the other one is just up the road in Long Beach (right on PCH again facing the ocean. The Huntington Beach one will be the one I try to score...badass condo facing the beach with hotties in and out of the place. My aunt's comin in to town today, then off to Antartica or Russia...can't remember. But I'll check with her to see if it's cool...more than likely she will give up one of the condos.</td></tr></table><span id='postcolor'>
hell yeah, hotties, 1 day SR installs, hotties, maybe some beer? lol I cant wait &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>

[davies2k]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Tyler Durdan @ Oct. 16 2002,5:21)</td></tr><tr><td id="QUOTE">Let me know...it's a sweet ass condo right on Huntington Beach (right on PCH), and the other one is just up the road in Long Beach (right on PCH again facing the ocean. The Huntington Beach one will be the one I try to score...badass condo facing the beach with hotties in and out of the place. My aunt's comin in to town today, then off to Antartica or Russia...can't remember. But I'll check with her to see if it's cool...more than likely she will give up one of the condos.</td></tr></table><span id='postcolor'>
Wow!!! I'm tempted to do the work for free for a week at the condo &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;Let me know when the house warming party is I'll bring the drinks and high octane fuel. &nbsp; <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/devil.gif" border="0" valign="absmiddle" alt=':devil:'>
Davidn

[Tyler Durdan]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Oct. 15 2002,11:08)</td></tr><tr><td id="QUOTE">Wow!!! I'm tempted to do the work for free for a week at the condo <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> Let me know when the house warming party is I'll bring the drinks and high octane fuel. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/devil.gif" border="0" valign="absmiddle" alt=':devil:'>
Davidn</td></tr></table><span id='postcolor'>
damn...you do the install for free...houseparty on me...beer, women, and the high octane. &nbsp;I think I can score the one on Huntington Beach...she said she would have some remodeling done to her Long Beach condo, so the Huntington one will be open.

How much would an s14 sr20det install, engine, and ac hookup run me roughly? &nbsp;

I am trying to get the budget together, and have no idea on what price range to be shooting for...any help is appreciated...shooting for December, just want to know how long I'm gonna be on peanut butter and jelly. &nbsp; <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/huh2.gif" border="0" valign="absmiddle" alt=':huh2:'>

[SR20Fastback]

Wait would the house party make my install free? Id be willing to take my STASH of beer,wine, tequila, vodka, and then buy the ice down there. This will be a huge party. Just dont let anyone do drunken SR installs &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

[SR20Fastback]

I'll also go to costco and buy like a 1000 pack of condoms!!

we can call this my congradulations you got accepted to UTI as of October 10th and now you're finally buying a damn SR party... well for me at least <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[MasterOFDrift]

dave you carry ca18det front clips???If you do how much you charging for 'em?

[Crab Spirits]

Come on Dave, help me out here. See my post on the 3rd page.

[adey]

MasterOfDrift-
No, unfortunately JDM Recycler do _not_ carry CA18DET clips... I wish they did though, I think I'd like the high revving nature of that thing. I'm also a sucker for 1.8 litre turbos. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> &nbsp;
Maybe if enough of us ask for them, he'll start to look into CA18s!

[davies2k]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Crab Spirits @ Oct. 18 2002,2:25)</td></tr><tr><td id="QUOTE">Come on Dave, help me out here. See my post on the 3rd page.</td></tr></table><span id='postcolor'>
Hey Crab Spirits~ I apologize for not seeing your post. &nbsp;I lost my phone this past weekend. &nbsp;I will express ship the items missing for you . &nbsp;Please reach me on my old number it's up and working again. &nbsp;Praise cellular insurance, I got my new phone in 3 days. hehehe. 714.713.1749

[the3SecondJerk]

I also asked him for the CA18DET. C'mon davies there is a market for them &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> &nbsp;puh puh puh please?

[slivic]

Dave, &nbsp;

Do you have any redtops in stock? &nbsp;I Blew my KA today and need one asap.

[BEISSEN]

Hey dave Ie-mailed you about soe prices?Are you going to reply cus i am looking for a good dea on a s13 blacktop sr and s/h to 22060?I was wondering prices for a clip and some that might be missing &nbsp;somethings not major parts but like cluster,i/c&pipeing and what kind of deal we can work out.Just e-mail me and let me know.

[davies2k]

SidewayzCA18~ I can import these motors if there is enough interest and deposits made. &nbsp;Like with any special orders we can locate and imports just about anything JDM. &nbsp;Please let me know ifyour seriously interested and I'll check on pricing and due dates.

Slivic~ sad to hear the Ole KA is blown.... I have one redtop instock... very clean and low mileage. &nbsp;reach me direct for questions. &nbsp;714.713.1749


Beissen~ you have email.. &nbsp;I must have over looked your message. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>
David

[240SXFORUMS.COM]

Hey David i sent you an email.

[damnbump]

I need a few dash peices for a s-13.would it be posible to get them from you?I can send you a pic of the parts I need.I am in the process of converting my 92 nissan over to RHD.would it be possible to get the steering box and idler arm imported?
also I am interested in doing a sr20-det swap into my truck later but money is a little tight right now

[davies2k]

Damnbump~ &nbsp;As for converting to RHD I would recommend you buy an entire clip to convert rather then cutting the firewwall. &nbsp;You run into safety issues when you cut the FireWall. &nbsp;When we convert to RHD we use the entire clip and use the OEM weld spots to reattache the car as a whole. &nbsp;I have several bare clips avail with all the necessary part to complete a swap easily and quickly. &nbsp;Better yet send us your car and we'll have your car done is less then 2 weeks full JDM spec.. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> I am askig $350+shipping for the entire bare clip.."frame only"


DavidN.

[chokudoriS13]

David,

I want to get some pricing info from you. My S13 project looks like its falling through, so I need to start anew. The previous car had Silvia panels, but this one is going to need them. Basically, I need an entire S13 front clip--engine/tranny as well as body panels (and dash/steering if possible for the RHD conversion). The new project shell is auto, so I need everything to convert to manual (which is all contained within the clip, right?). &nbsp;Redtop is fine, and I want straight body panels if possible. Also, are the intercooler (side-mount) and downpipe included with the clip? &nbsp;I guess, basically what I'm asking is, can I drop it in and drive off, or do I need anything else?

I won't be getting this until the car I have now is gone (about a month), but I will be able to put down a deposit in cash or pre-pay when I decide on this (less than a month), if that makes any difference in price, and price is a pretty important factor <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'>.

I'm "just up the street" from you in the San Fernando Valley. how much does "local" delivery usually run? Also, since I haven't dealt with this yet, how simple/complex would it be for the shadetree mechanic to do a RHD conversion on his own (as you can see, I'm trying to avoid installation costs)?

Thanks

[davies2k]

chokudoriS13~ &nbsp;As far as Rhd conversions. please read a couple of previous replies in regards to this question. &nbsp;Bascially, everything you need to convert to Rhd will be included on the full clip... Again,it's all dependant on which clip is avail at the time you are ready to buy.. I currently have a list of people who have deposited and will have the opportunity for first picks when the containers are unloaded.... &nbsp;

For a DIY mechanic, it's very involved to successfully convert to RHD.. There are many safety issues involved when converting... The most important factor is to preserve the OEM crumple zones in case of an accident... &nbsp;

We offer conversion service and install of all JDM motors.. &nbsp;Please let me know if you have any further questions.
David

[davies2k]

*** Update***
Our new containers have arrived &nbsp;and will be unloaded this Tuesday. &nbsp;I will update with pics and prices as the become avail. &nbsp;For those with deposits, please reach me direct to pick up your clip or have shipping arrangements.

David >

[exitsanity]

davies:
do you have any S13 silvia body conversions (headlights, grille, mounts, wiring, body panels, hood) available? complete or incomplete information would be appreciated ;-) thanks

[devil_s13]

Dave, Im doing the swap real soon, looking for a good SR motor that comes with uncut harness and ECU.. The price as you said is about $1,900-$2,700, so what makes the difference in price? Im in New York Area, I was gonna get one from Heavythrottle.com, but they dont have any in stock now because of the dock strike. I'd make all kind of payment as long as i can get the best deal. Please give me a quote the shipping. My zip is 11717

[davies2k]

Devil S13~
you have &nbsp;PM.

[Crab Spirits]

Davies, you rock!

http://members.aol.com/movistar323/images/afterside.jpg

http://members.aol.com/movistar323/images/silclip.jpg
Insurance money rules. Along with the front end swap, I had to do a partial frame swap because of the 240's front end damage. Five hours of cutting/drilling/welding. Not fun.

[davies2k]

Crab Spirits~ Very nice body work... I cant wait to see it complete with paint and corner lamps. &nbsp; <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> Keep the picks coming with your project updates.

David N.

[240SXFORUMS.COM]

I ordered the Blacktop S13 from David, Thanks man. I can't wait to have it in my hands and install it.. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

[jvh22a]

do you have any s13 silvia front end conversion? &nbsp;would you happen to have some stock ka24de left over from sr20det swaps?
thanks

[TheDorfitas]

May I ask how much you charge for the S13 RHD conversion??
I was thinking about doing the conversion myself, but was also concerned about the firewall cutout/safety issues... so I may as have a professional do the job right!
Also, although you're using the OEM weld spots to reattach the whole front, does cutting and rewelding affect the structural integrity of the chassis??
Thanks!

[NismoGear5]

just got my money together, are you still selling S13 Silvia fenders? How much ? What's your number? Thanks.

[davies2k]

JVH22a~ At the moment I have one Silvia convertion avail. &nbsp;Please call me direct for more info. &nbsp;I am told by our suppliers that our next shippment will have over 10 complete silvia clips. &nbsp;

TheDorfitas~ &nbsp;The price varies with each conversion. &nbsp; With regards to the integrity of the car by re-welding. &nbsp;I am told that the car is acutually stronger since along with the spot weld's we complete the seam with a full weld. &nbsp;Many chasis tuning shops use this method on race cars. &nbsp;It's simply much stiffer and rigid.

NismoGear5~ &nbsp;My number is 714.713.1749 &nbsp;please call me for avail..


David &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/alien.gif" border="0" valign="absmiddle" alt=':alien:'>

[Crab Spirits]

members.aol.com/movistar323/images/afterfront.jpg
Does that mean I have corner lights coming? <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/lookaround.gif" border="0" valign="absmiddle" alt=':look:'>

[davies2k]

Crab Spirits~ I have not forgotten about you. &nbsp;I am still waiting for my shipments for your intercooler. &nbsp;I have all your other parts. Only thing missing is that darn IC. &nbsp;Hows your swap coming along? &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/alien.gif" border="0" valign="absmiddle" alt=':alien:'>
David N.

[Crab Spirits]

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (davies2k @ Nov. 12 2002,12:54)</td></tr><tr><td id="QUOTE">Crab Spirits~ I have not forgotten about you. I am still waiting for my shipments for your intercooler. I have all your other parts. Only thing missing is that darn IC. Hows your swap coming along? <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/alien.gif" border="0" valign="absmiddle" alt=':alien:'>
David N.</td></tr></table><span id='postcolor'>
I've pulled the engine and wire harness from the clip. Just getting all the details sorted out on the install. The clip was an obvious drift car. When I pulled the clutch I found a roasted flywheel and pressure plate, and a brand new stock clutch disk (Painted numbers were not even worn off the facing yet). Looks like they slid backward into something pretty hard cause it broke the trans mount. I've kinda reached a standstill while I look around for these parts.

If all you're waiting for is the IC, don't bother. I'll probly just go with the Blitz LM kit. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'>

Thanks for the support.

[davies2k]

Crab spirits~ your clip was prolly one from the Option D1 drift competition cars that made it's way to the US... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'> Lemme know what parts you need and i'll send them to you. If I have the parts it's FREEE!!!!!. As for the clutch you recieved it's simple just have the flywheels and pressure plate resurfaced and your good to go... Lemme know if there is anything else you need to complete your swap..
David

[Crab Spirits]

Bonus! The turbo on my redtop looks like it's an S14 Ball bearing! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/notify.gif" border="0" valign="absmiddle" alt=':notify:'>

[S13FREEAAK]

How many redtop clips do you have left?

Thanks

[nokuntrol]

Do you accept Credit cards?
I wanna charge a portion of the SR on my credit card, and pay the rest in Cash. I can show you ID that the cards are mine, and give you any other info you need.

hehe...credit decreased my APR, and give me no interest til 06/2003. i have 7 months to pay my SR off! hehe

[davies2k]

S13Freeaak~ &nbsp;I am still expecting our second "mystery" shipment.. It will have 7 redtops 4 blacks and 2 s14's.. I have several people who have paid in full for the clips and will have prime choice of the clips.. Please reserve yours asap..

Nokuntrol~ &nbsp;At the moment we do not accept credit card payments.. we can do a paypal payment if you wish.. As for the unbeatable no interest, you might consider taking a cash advance on your card...and still not pay any interest... Give me a call and we'll see how we can work something out..
DAvid <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/alien.gif" border="0" valign="absmiddle" alt=':alien:'>

[autobahNESSA]

Did you recieve your shippment yet? &nbsp;Can you post pictures of them.

[andrave]

if you can get a very competitive offer on the ca18 det engine or front clip, I would be interested.. you said if you got enough offers you might be able to get it- well my engine is on the high side of 155k and is going the way of the crapper. &nbsp;I'm thinking about dropping a fuel cell and limited slip in and then just running the shit out of it till it blows up, then buying a ca18det with student loan money and hooking my car up.
irresponsible sure, but after lawschool I'll be 50k in debt either way, so 1k doesn't make much difference.
I know its possible to get the ca18det clips here for cheap- I've seen low mileage engine/tranny/ecu combo's go for under 800..... &nbsp;so if you could get the clip here for 1000 or at least under 1200 you would be a hero.

[davies2k]

Bayarea240~ &nbsp;We have recieved shipments of some SR motors but are sold out.. Our most recent shipment was only Honda's.. &nbsp;I am expecting a large NISSAN shipment Dec. 10th <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'> . I will post pictures as they become avail..

Andrave~ at the moment we are not bringing in the CA's.... sources tell me that the SR is a better swap since part are readily avail. and the CA are a bit more grenade happy.. Again, this is just from speaking to various suppliers and tuning shops that we supply too.... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/devil.gif" border="0" valign="absmiddle" alt=':devil:'>

I have a dozen S13 Vlsd's avail.. Holiday Special Pricing $300 for pumpkin and $475 for entire rear subframe...

Happy holidays,
David
JDMRecycler.com

[andrave]

wow 300 bucks for the pumpkin alone? &nbsp;
what brand are they, how much mileage is on them, does that include shipping, and do the splines bolt up the stock s13 sohc axles?

[davies2k]

Andrave~ They are all "OEM" S13 rear diffs. &nbsp;We sometimes find KAAZ or Cusco clutch type hidden in the pumpkins.. They are direct bolt on affairs for S13 and S14's .. I also have the some rear subframe sets with the thicker drive shafts.
David

[andrave]

man I feel like I'm posting a lot but... &nbsp;
so is 300 shipped? &nbsp;and will they bolt up to my axles and driftshaft and such in the back? &nbsp;if so I may get one in january when I get back in the country.

[Lavondyss]

I've been watching this post for a LONG time now. First off, I'd like to thank you for offering these clips at such great prices. It's obvious you have a very sturdy business going, and great customer skills, and good prices. So here's what I need, and let me know how we can work this out. I'm pulling money out that I've been saving for a couple years now, and this will bleed me dry, but I've had to shut down my business (the economy sux), and I'm focusing the next 3 years to finish up school. Here's what I need:

S13 Silvia Front Clip
With Intercooler Piping, intercooler, and everything intact.
Would like sub 50k mile clip.
Including Silvia Body Panels + Lights
Non-projector Headlights
Optional OEM Aero Front Bumper w/ lights and bumper support
http://www.jspec.com/s13aero2.html
Also one of those VLSD Subframes you have.
Shipped to Houston, TX.

I'll be ready to make a purchase within the next month. I can wait as long as it takes for this stuff to be located, and a deposit is not a problem. Let me know what kind of deal you can work out with me. The body panels DO NOT all have to be the same color, and I would like to purchase this all at once!

[email protected]

Thanks,
Charles Weller

[davies2k]

Andrave~ Yes, everything will bolt to our USDM cars.. Shipping is not included in the quoted $300.. These things are heavy so either UPS or freight will be used...

Lavondyss~ Thank you for the encouraging response to my LONG thread <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> . &nbsp;What your asking for is fairly common.. I am expecting two more shipments this year and that's it... &nbsp;Basically, it seems Japan goes on a long vacation during the holiday season... &nbsp;I have a list of people who are putting deposits on their clips.. Let me know when your ready and we'll have your clip waiting for you. &nbsp;At the moment I have 9 people on the list for the next shipment expected around Dec. 10th.

David

[andrave]

hey I tried to go to your site, jdmrecycler.com, and it says there is no page available with that name... what is up with that?

[andrave]

hey I tried to go to your site, jdmrecycler.com, and it says there is no page available with that name... what is up with that?

[wpayne]

Dave, I've contacted you before on this board and told you that I intend to do a swap.

I want to do an S14 SR20DET if possible. When is your next shipment after the Dec. 10 shipment? I might be able to make a downpayment on the Dec. 10 shipment but that depends on what is still available.

If not, I'd would like to make a downpayment at the begining of next year for your next shipment that comes in January.

[davies2k]

Andrave~ we are currently under a new host for our website.. According to my webmaster we should have it up in 1 week. &nbsp;For now please visit the link below for some of the items we bring in and might still have in stock. &nbsp;

http://briefcase.yahoo.com/dealoha

Wpayne~ I remember your reply some months ago.. Sure let me know when your ready to move forward with your S14 swap.. &nbsp;Have you considered either S13 swap or go with the full S15 Swap <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> ? &nbsp;

I'm in the process of dropping in a S15 into my S13 body. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'> If any one has any helpfull tips on the install please chime in, I'll need all the support I can get on this project.

David

[wpayne]

David, I know I don't have the money for an S15 swap <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('> . How much better is the S14 than the S14? I'm just more worried about the S13's having more wear on them. Have you had any problems withe the engines or complaints from customers for either engines?

Do you know when if and when a shipment is coming in after the Dec. 10 one?

Thanks &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>, Wes

[davies2k]

Wpayne~ &nbsp;As far as the difference between the S13 and S14, there are a few ponies difference and the rare ball bearing turbo.. True the S14 will have less mileage, but we have not had any issues so far regarding either engines... &nbsp;The cost saved with an S13 you can easily build more power in the long run. &nbsp; It's a difficult choice between both engines... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>

Best of luck,
David

[A51PS13]

W payne there is more than just the turbo and ponies. Fuel maps are obviously slightly different. The s13 and s14 have diferent style intake manifolds. If im correct the s13 is a highport and if you intend on keeping the stock intake manifold it does have better flow characteristics than the S14 and S15 manifolds. If Davies2k doesnt have the motor you are looking for you should check out my forum for motors. Just tryin to be helpful.
&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;-Serge B

[JRTurbo909]

David,

I called you a while back bout an S13 redtop w front end conversion. I am ready to buy. Email me at [email protected] . &nbsp;Thanks

Shah

[Lavondyss]

Ditto. &nbsp;I'm ready to make a purchase. &nbsp;Quick question though... &nbsp;How quickly could I get a front clip delivered to me? &nbsp;I've located a good shell, but if I don't make it happen within the next month, it won't happen for 7 months. &nbsp;I've got to have a reliable car to get to and from school, and I'm moving for a semester. &nbsp;So, I have to purchase the shell, and do the swap before the 5th of January, or I have to Locate a strong running s13 coupe before then.

So, same question as before. &nbsp;How much for a CLEAN s13 front clip w/body panels, and non projector headlights shipped to Houston, Tx. &nbsp;And how quickly could it be sent here? &nbsp;I'm buying one through ya'll either way. &nbsp;Just depends on if it's a deposit for THIS shipment, or one 6 months from now.

Thanks,
Charles Weller

[davies2k]

JRTurbo909~ It good hearing from you again. &nbsp;Next shipment is due in around Dec. 10th.. I will email you details.

Lavondyss~our shipping company usually ships to your door within the week.. I have shipped several clips to Texas and only took 4 days to arrive. &nbsp;We can have your car running easily before the new years <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

David

[autobahNESSA]

Dave, your email is [email protected] right?

Ive emailed you a couple days ago, and have not recieved a reply. &nbsp;I was asking about your lsd's. &nbsp;What type of deal can you give me for 2 of them since im buying 3 clips from you?
Thanks
Chris

[davies2k]

Hello Chris,
Yes that is my companies email.. One of my salesperson read your post and mistakenly deleted the post.. I got the message and have checked on pricing for you...Anyhow, are you looking for just the LSD pumpkin or the entire rear subframe... &nbsp;Subframes include all rear suspension arms and links, thicker drive shafts, rear knuckles...Please email me direct at [email protected] for future inquiries.
Thanks
David

[mixedwell]

DAvies... are you from the same JDM recycler the one loacted in the city of industry? cuz they have the same name and they do good stuff too. anyways i sent you email so email me back asap. also i wanted to know if we could pick up from you and if we can get group buys... you know, cheaper? <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'> &nbsp;anything to save a buck or two. ok stay easy




silvia... my love <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'>

[davies2k]

Mixedwell~ Yes! I am JDMRecycler in S. El Monte.. when did you have a chance to visit my warehouse? I would be more then happy to assist the forum community in a Group Buy!!! If you would like to organize one. Please let me know how I can be of any assistance. I can drop ship any where in the US.

I am not sure if I recieved your email. Please try to email [email protected] for any questions.

Anyone coming out to WWW.Speedtrialusa.com 's event this weekend.. I hope to see everyone there this weekend... <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'>

Regards,
David

[mixedwell]

davies can you give me directions on how to get to your shop/place wherever? im in the walnut area that should be right next to you guys. if not, im in west covina. if anyone can tell me how to get there from the 60 or the 10. i know my way around.

yeah i went to your shop once but i dindt talk to anyone. yeah i saw a bunch of front clips and stuff and an evo lancer i think. my friend murk has a left hand EVO VII. dont ask me how he got it. he works for DSM. davies i think you know him. skinny tall black guy. thats all. eheh i need directions!


silvia... my love

[adey]

From memory, to the SHOP (not warehouse/office)
60E exit Santa Anita. Left at the light,
Go over freeway and left at first light,
Left at first Stop Sign,
Go through "park" area, down about 1/4 mile then take the 90degree right turn,
go straight and make a right on "Al Paca" or something to that extent. It's an industrial estate, you could say.
ABCD/JDM Recycler will be on the right, about 3 garages in.

if you get lost, don't blame me. =)

[SimpleS14]

Dave,

Is it possible to obtain a S14 front clip? &nbsp;

If your cool with a down payment I would gladly do it. &nbsp;I'm looking for a S14 front clip at a good price, but I really don't intend on doing to swap until spring/summer. &nbsp;Let me know if you can obtain a clip. &nbsp;I can always wait until spring or summer time.....buy then I have the ALL money saved up and ready to go. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sly.gif" border="0" valign="absmiddle" alt=':sly:'>

[davies2k]

Adey~ *pats on the back* &nbsp;Thanks for the accurate direction.. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=':D'> &nbsp;Hope to see you at the drift day in January..

GT SpecR~ &nbsp;S14's are a common item we stock. &nbsp;However, they are extremely difficult to import *rare* and usually are the first to sell once we receive them.. Please give me a few weeks heads up when your ready to order...

WOW!!!! 6pages already.. I wonder who is gonna own Page Lucky 7!!!!!!

Happy Holidays,
David

[mixedwell]

davies i worked with you guys before. i used to work at a shop in la puente called "KD extreme work" ABCD. i know you guys. you might know my old boos keit. well holla.

hope this was the 7th page.


silvia... my love <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'>

[SimpleS14]

Cool...so how much are S14 front clips?

[SilviaDriver]

i havent read the whole post, but do you have price numbers on the clips, not exact but varying numbers. i found a s14 clip for 3800 with 22XXX miles on it. i have personally checked it out and it looks clean and good to do. if you can beat that in any way,ill be sure to go check urs out as well!

Thanks

[davies2k]

Mixedwell~ &nbsp;Yeah La Puente is very near us. &nbsp; Stop by again can say hello...

GT Spec R~ S14 clips start at $3000. This includes the full clip from the e-brake forward.

SilviaDriver~ &nbsp;We should be able to sell you a S14 clips for considerably less.. &nbsp;$3800 is a fair market price for a low mileage S14, but again we are trying to offer wholesale level pricing...

Regards,
David

[SilviaDriver]

whoa, that is an awsome starting price davies2k, ill check out urs for sure, where is ur shop located? im thinking about checking out the shop in Livermore since its near me

[adey]

Davies2k- &nbsp;just trying to help you guys out! I have a few things I'm looking for now, as well as someone who does good body work. I shot you an email yesterday/lastnight, but am not sure if you've received it. (I also do realize it's only been 12 hours or so, I'm just making sure you hear me)... &nbsp;
In any case shoot me an email at [email protected] or give me a call if you still have my number, I have a couple 'requests' before I make my way home for winter break. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=':)'> &nbsp;

silviadriver- look up about 5 posts, and you'll see my directions.

[Garage Battle]

Davies.....I need 2 redtop clips. &nbsp;What methods of payment do you accept? &nbsp;Looking to buy asap. &nbsp;Sent you an e-mail. &nbsp;Thanks!

[Garage Battle]

TTT what hapened to this?

[AE86180SX]

Hey David would you ship to Honolulu Hawaii 96825? How much would I be looking at if you could ship a redtop to me? Thanks

[davies2k]

Garage Battle~ Please reach me direct at 714.713.1749 for questions and availability...

AE86180SX~ aloha!!! I will check on shipping to Hawaii. I sure do miss the nice warm Trade winds in aloha land.. I used to live in kahala when I went to school there.

I love this new VB format.. *tips hat to the people involved in the changes* :)

Happy Holidays everyone!!!!

I love this new VB format..

David

[AE86180SX]

Sup David you got mail. E mail me that price quote please.
[email protected]
Thanks

[Garage Battle]

ill drop you a line thursday. So, whats the story on the inventory....did you get the shipment?

[Garage Battle]

can I get a list of whos gotten their motors so far and what experience they've had so far? Thanks!!

[mixedwell]

you know what? i remember working with JDM recycler/ABCD when i woked in a garage at KD extreme work. we ordered alot of motors (lets see... 2 B16s 2 B20s and other fun stuff... i wonder what we were going to make? :D ) yeah anyways they hooked us up pretty sick. and i mean these were some nice motors we got. and i can say from experience the peopl are relible and friendly. no really. im going back to ABCD/JDM recycler when i put another s14 motor on the s13 chasis. and you knwo what? JDM recycler rocks. the best prices in town. the best goodies in town. holla

mixedwell ;)

Davies you ROCK. you guys still have that black truck you haul your motors in? expect a call from me im gonna call your office or i might just drop by. which is best? thanks for the motors.

[turboex]

hey dave can i get a total on a s13 vlsd shipped to minot ND 58703. thanks man

[ae86kaizoku]

Hey Dave, just read through this whole post...wow! Awesome prices, on installs and clips...I'm going on deployment in January, coming back sometime in July(hopefully), so I'm gonna pick up a 240 and have the $ for a swap...so, can you give me an estimated total for the following:

low mileage redtop front clip
silvia panels/lights etc.
install with A/C

Also, how much would the price change if I had you guys install a new clutch(that I will buy from a friend) when I get the SR put it?

Thanks!

[email protected]

[AE86180SX]

BUMP:D

[wicked s13]

Im interested in a s13 silvia clip with good pannels lights and so on what is total cost to Denver Colorado, thanks

[Crab Spirits]

Originally posted by Garage Battle
can I get a list of whos gotten their motors so far and what experience they've had so far? Thanks!!

I can vouch for Davies. I had a clip sent to Chicago. Took longer than I expected, but so does everything from Japan.:rolleyes:
Great to do buisiness with!

BTW Davies, you wouldn't happen to have any s13 silvia aftermarket bumpers laying around in that magical warehouse of yours would you? I need something more vicious looking to frame my LM intercooler. :cool:

[SimpleS14]

How much is shipping for a front clip?

say to zip code: 22191

[davies2k]

I hope everyone had a safe Holiday... We have been busy in the past few weeks to prepare a few of our cars for the 2003 L.A. auto show..... JDMRecycler will be located in the Kentia Hall at the Staple Center... I hope to see everyone there this year..

AE86180SX~ email sent

Garage Battle~ It was a pleasure speaking to you on the phone. did you recieve all the information you needed?

mixedwell~ Yes we still have our faithful deliver/tow truck.. stop by and hang out ... :D Let me know what you still need.


ae86kaizoku~ Thanks for reading all of the posts. :D :D gosh that is a lot of reading you did.... I can have your clutch installed at now additional charge to you.. just bring your clutch and I'll have the techs install for you.. Please call me direct with further questions...

wicked s13~ PM sent :D :D

Crab Spirits~ Hey!!! How is your mad swap coming along.. send us west coasters some pics of your car.... I will be recieving a large shipement of silvia goodies in the next few weeks ... if anything comes up I will update you...

GT specR~ PM sent ... please contact me direct for info....

**** for all the lucky people attending the LA Auto show please stop by and pick up one of our flyers.. You will not be dissappointed.... We are having a special Show pricing for all of our swaps..****

Pssssttt... complete swaps /installed $2500 shhhhhhhh****

Regards,
David

[nonameface]

Holy crap! I wish you were in WA!

[AE86180SX]

Dave I didnt get your email. Can you send me a quote again to [email protected] or PM me if that doesnt work again.
Damn $2500 installed huh? Maybe I should move to Cali.

[joo02]

I don't see JDMrecycler on the exhibitors list.

http://www.laautoshow.com/exhibitorlist.asp

One more thing.... is Staple Center a part of LA Convention Center?

[wicked s13]

hey For some reason I cant pick up you pm's so can you email me about the s13 silvia clip with good pannels and shiping to Denver Colorado

[joo02]

I went to LA auto show today, went to Kentia Hall, but couldn't find JDMRecycler. No such exhibitor name.
Are you under different name?

[davies2k]

joo02~there are some exhibitors names that did not update on the list.. I will check with the show admins... We are next to a Cell Phone accessory booth...

wicked s13~ I will email you with a quote.

joo02~ We are either registered as SpeedtrialUSA or JDMrecycler.. I will confirm later today with the show admins...We are located in the Kentia Hall next to the cell phone accessory booth .. we have our Hunter Green Silvia and 03' Civic Type R on display....

I will be at the show all week, please leave your messages with me and I will reply as promptly as possible.

David

:D

[NismoSkylineR34]

I went to the Auto Show yesterday at seen their both the silvia was awesome. they are right across from Drifter X's Drift car. The people at your both were all very nice and informative i hope to be doing buisness with you guys when i can get the money for the swap.

[SR20DET S14]

did i read that right? a complete swap for 2500?...... i bring my car...hand u 2500...and drive away swapped?!! please tell me its true!! just blew my engine and am or was planning on getting another KA...

[AE86180SX]

Hey David I didnt get your e mail on the quote yet. I know you been busy lately.Thanks [email protected]

[davies2k]

NismoSkylineR34~ Thanks for visting our booth and the feedback about your experience with us.. I hope all of your questions were answered... :D :D


SR20DET S14~ YES!!! your eyes are telling you the truth.. we are extending this offer until the end of January.... Place your orders b4 we are sold out...


AE86180SX ~ Email sent

[NismoGear5]

Hi

I'm selling my coupe this sunday and getting a 89 hatch for cheap. So is it really $2500? If so, I would like this swap done within 2 months. Email me at [email protected]

Also my bro has been thinking of a swap lately, tell us what's up. Thanks and have a nice day.

[wicked s13]

hey man Im not sure if you have my email it [email protected] Thanks

[Rocking_S14]

Where you located?

[Rocking_S14]

I'm bringing a JDM S14 to California, what would you charge to do a complete swap from the JDM S14 to a 93 240SX? I'll have all the necessary parts...just need labor quote.
thanks
email me at: [email protected]

BTW where are you located in Cali?

[JRTurbo909]

Hey, I emailed you bout a month ago and taked to you on the phone but after that, you didnt returned my emails. I am very interested in getting a CA18DET Silvia Front clip. Would you be able to get those? I am ready to buy. Email me at [email protected]

[Firelance]

just wanted to let you know that someone at 240sx.org is asking questions about jdmrecycler. Go defend your honor :) The link is here:

http://www.nissaninfiniticlub.net/vbulletin225/showthread.php?threadid=9961

[Garage Battle]

hey david, i need a price on a s13 sr20det ECU. give me a price shipped to area code 34221. thanks!

[autobahNESSA]

Wow, 2500
man whish I knew that, I would have waited the xtra month.

Well I will vouch for dave, he has been good to work with. He stands behind his products, and so far has shipped out xtra needed parts, and stuff that got left behind in a timely manner.

Dave- It would be nice if I can get the turbo in by thursday, that
way I can start swapping on friday.

How do I get the output shafts on the lsd out? It looks like thier is a special tool, but as I went through the web, nobody made menion of using these tools.
Thanks

Chris
[email protected]

[stvr6]

man, those are some great deals! I could only wish somebody here in Houston Texas, could match them.. in any case, how much for a s13 redtop ECU Wiring Harness shipped to 77057? I envy you west coast peeps!

[Grant]

ok sorry davies. I'm going to temporary close this due to new guidelines for business postings..

pending authorization.

Thanks..

[davies2k]

Hello Grant,
I left you a message on your tel.. and email.. just checking if you recieved them. I hope this post is Ok.. please let me know otherwise... Paypal payment was sent today to become a full- fledged sponsor of this forum. !!!!! :D :D

***Peeps, the mother load container just arrived.. we have over 30 SR20DET clips instock ready to ship...!!!! We are expecting over 100 complete clips withing the next few months so hurry and reserve yours soon.. Please reach me direct at 714.713.1749 for info..***

Thanks everyone who took the time to stop by our booth at the LA auto show to give support and introduce yourselves.. Two more days left....

Regards,

David:D :D

[saga240]

david rocks :D thanks for your time to show us around on saturday.. hah sorry i was kinda sick with the flu so i wasnt thinking too well. normally id be star struck seeing all the SR's.. lol

i forgot to ask though, do you weld pipings there.. like for intercooler piping or downpipes?.. or is that all sent to mufflers shops to do?


-james

[davies2k]

Saga240~ YOur Welcome.. thanks for stopping by.... Yes we do all of our welding inhouse.. which means we weld just about anything you can think of.. Please let us know what you are interested in doing..

Out of our 30 clips.. we have 4 left avail.. they are all SR20DET Red tops... If anyone is interested in our special L.A. Auto show deal you have a few days left... $2500 installed into your car....!!!!

Hope to see most of you guys this weekend at WWW.Speedtrialusa.com's event... If you havent already registered come to California Speedway and register.... JDM Recycler will sponsor $40 of your entry fee... all you have to do is bring out your car and have fun....:D :D :D ...

Wow I cant wait to rip the track up...

David
www.jdmrecycler.com

[Grant]

ok cool! I believe you talked to Mark though. He's the super admin of the forums. Sorry, I received no message. I guess you're all good to go now David. Good luck!

:D

[lVll2. S14]

hey wassup dave ..its alan ...we met a while ago i came down from sf...anywho jus wondering if u could still hook me up with those s14 jic coilovers u were talking about...leme kno email me at [email protected]

[NismoGear5]

Hi

would you happen to have any special deals anytime soon?

I have a spare $2000 right now, not enough for $2500 yet. Let us know thanks.

[davies2k]

Hey gang,
It's been awhile since my last visit to this thread.. Sorry for all the delayed responses.. We have been swamped with SR20DET installs for the last three weeks... I hope everyone had an incredible New Years and Holiday Season...

lVll2. S14~ Hey Alan,, good hearing from you.. Yeah I can help you out with the JIC Coilovers.. we are a Dealer for JIC and can get just about any part they make.... Please reach me direct for more questions.. I will send email too..

NismoGear5 ~ The $2500 installed package is ending soon... I am not sure what other specials we will be offering but you never know what's on the specials list.... Give me a call and we can work on making something work for you...

For all the peeps who celebrate Chinese New Years..

GONG XI FA TSAI!!!!! "Happy New Years"

Best of luck,
David
714.713.1749
WWW.JDMRECYCLER.com

[240Driver39]

man, i have to agree with other guys, wish that kinda deal would be around here, pa.

[turboex]

Wired my money into today. Soon as they get there shipping stuff figured out ill have mine and be posting the pics. So far so good a great company to deal with

[saga240]

well david just let me know when your next special is.. hah ill definitely be in for that one.. too bad i just cant have the motor now.. but oh well.. my KA is good to me.. so i might as well use her for a lil while longer..

-james

[cooldill]

hey david, seems like u giving everyone the hookups. can i get an estimate on a s14 front clip shipped to honolulu, HI 96816. thanks alot.

[hkssilvia]

Hey David, please can you give me a quote for JIC Rear Camber Adjustable Upper Arms for S13 shipped to Boise, ID 83709? I am ready to purchase. Do you accept paypal? Please email me at [email protected] Thanks a lot, Johnny

[ryan hagen]

hey do you still have any off those parts form your blown up sr20's, i know you posted it awhile back but i m just checking. thanks

[saga240]

hey david,

how much extra is it to make piping for an fmic when you do the swap?.. just the intercooler by itself.. not the ones that have a kit with piping and everything..

-james

[S13wannabe]

David, do you guys get in any JDM toyota motors ? I have a friend looking for a JDM engine for his MR2.

[sykikchimp]

David - If you get any S15 hlsd's or s15 rear subframes with LSD attached.. let me know.

[TheDorfitas]

David, you mentioned that you do Spot Welding/Seam Welding when you perform a RHD conversion...

I was wondering if you've had any experience Spot Welding the chasis on a 85-86 Toyota Corolla GTS(AE86)?? I've read in many Japanese mags that spot welding the AE86 chasis greatly improves the structural rigidity.
Just wondering if you've ever spot welded an AE86 chasis, and if so, how much??
Thanks!!!

[adey]

Since it seems like David hasn't been around for a while, let me see if I can at least partially answer some of these questions...

Sykikchimp, I do believe David and JDMRecycler can get you S15 subframes and HLSDs, although it may be special order, as I'm not sure if (front) clips come with rear subframes. S15 clips (and they have had a couple come and go) generally come with all shocks and brakes, possibly some of the rear arms, but subframe/LSD... might be tough (or take time). If you need answers fast, I'd recommend calling David. :thumbsup:

TheDorfitas, JDMRecycler do spot welding, roll cage installs, clip-to-clip weld/installs, and all sort of funky stuff... if you told them where you wanted the chassis spot welded, I'm sure they could do it for you quickly and for a reasonable price. If I had gotten my frame pulled with them, I would undoubtedly have gotten at least my front shock towers spot welded as well, but as things turned out they didn't have space/time for my car and I had a deadline, so I ended up getting a half-assed job done somewhere else. Give David a call, and I'm sure he'd be more than happy to help you out!

[davies2k]

Thanks Adey!!! I hope the drift beast is back in cosmetic order....

Between our race schedule and customer cars we have been swamped.... Due apologies for the delayed responses....

240Driver39~ The special was for local L.A. Auto show peeps, but to be far to our out of state members I will extend something special for you all... Please give me a call for details..

turboex~ Thanks for the kind words.. your clips should arrive in a few days.... If anyone has dealt with a good reputable frieght company please chime in .... :D

saga240~ our specials are Top Secret I will announce them as they become avail.. in the mean time call for promos we may have.. or just stop by again and visit...


S13wannabe~ YEs we have Toyota MR2 clips avail.. let me know what generation you are looking for..

sykikchimp~ Still looking for mysterious Hlsd? I only have one avail. but it's for the S15 clip... I will let you know if anything special pops up... How are all the JIC suspension goodies working on your cars?? Post some pics for us!!! :)

TheDorfitas~ Yes we can perform custom chassis stiffening for you... We do it on all of our race cars and what an improvement it makes.... We will basically sand down the seams to bare metal then spot TIG weld the seams with beads and repaint ... Please call or stop by for pricing since work jobs vary...

Like Adey the Drift prince has mentioned please give me a call direct with any questions that may arise.. you can reach me direct at 714.713.1749

Regards,
David
www.JDMRecycler.com

[sykikchimp]

the new ride height:
http://charles.sykikchimp.org/images/JICMagic/JIC240.jpg
lots of random HUGE pictures here:
http://charles.sykikchimp.org/images/JICMagic/


I LOVE MY SUSPENSION.. seriously kicakss. Rides better than I could have imagined. Body roll is almost completely eliminated. I have stock sway bars.. Got the Rear upper arms on last weekend too.. the Rear feels even more planted than it did before. Thanks david!

yeah.. still want that hsld! I have money sitting in the bank with your name on it.. simply waiting for you to say.. hey.. I got it!

Need the Diff, and output shafts. nothing else. The reason I was thinking about getting the whole subframe is that I hear the s15 subframe has a lower roll center.. Do you know if this can be grafted onto an S13?

[fridexter]

I ended up going to JDM Recycler's warehouse this past week and I have to say, it was definately fun! I brought along a few friends, and we ended up staying a lot longer than we originally planned. But I guess that's what happens when there's a bunch of neat cars (ranging from a Soarer to a Buddy Club Civic) around, and someone as nice as Dave explaining all the little knick-knacks about each. And the cool thing about everything was that me and my friends were free to roam around and just look at whatever. Needless to say, it's a place I wouldn't mind going back soon!

Fortunately for me, I'll be back this Monday to exchange a rear set of shocks because I ended up getting OEM Nissan Tokico ones instead of aftermarket ones. :o Should be fun! :)

-Dan

[davies2k]

sykikchimp~ I wish I can make by black ITR shine like that. :) We will be planning a trip for Asia to hand pick our next shipment. I will make certain that your HLSD is on that container... I will up date as I have confirmation for you....

I thought I would repost this message from another thread... Since, it has been brought to my attention that many members have used this lengthy 7 pager as a resource for JDM information.

TheSparo wrote,

“JDM Recycler
do they offer tech support and make sure their engines work b4 they send them? r they as good as heavy throttle? would u trust them? thanx if u can help!
-Jeff”


TheSparo~ As an importer/wholesaler we will offer you the most comprehensive testing available to insure your clip is in certified running order.
As a new policy, prior to any shipping or installing of any clip we test start and run all of the clips for at least 2 minutes. During this time we are listening for any irregularities or signs of a weak engine. We still continue to perform our routine leak down and compression test on all of our motors.
On our next large shipment both mike and myself will be traveling overseas to hand pick our shipments. We are in the process of fabricating a simple fuel delivery system to simply attach to clips allowing our overseas counterparts to test and run every clip that is sent to us. We will be bringing our test equipment and show our suppliers how to test and insure we are receiving the best possible clips.


Thanks to all the members who have traveled all from all over the country to visit and allowed JDMRecycler to perform your swaps... We will try to offer another JDM Deal on the next shipment.. Keep your eyes posted for our Deals...

For all you East coasters, keep those early 6am wakeup calls coming... I know it's only 8am eastcoast time and those JDM questions just need to be answered ASAP!!!! hehehe :)



Regards,
David
WWW.JDMRecycler.com

[ryan hagen]

Hey can I get prices on these shocks and the estimated shipping to rhinelander wi 54501 for the shocks and front clips……
and for the shocks which are for s13?

jdmaccess.1 016 +s/h

jdmaccess.1 015 +s/h

jdmaccess.1 018 +s/h

Clips 013…….+ s/h

Clips 003……..+s/h

[wicked s13]

Hey man I need a price on a complete s13 clip shipped to Denver Colorado. And a second price on a complete s13 silvia conversion and clip, also shipped to Denver Colorado. Thanks man
[email protected]

[Domexicano]

I don't know if you carry toyota clips, but my friend wants to Turbo his NA 95 supra, and I just wanted to know how much it would cost if you can get full front clips. Please email to [email protected] also if you could email the price for a silvia clip with panels to 11520 that would be great. Thanks.

[davies2k]

ryan hagen~ We are currently sold out on the S13 suspension components.. I expect some more in our next shipment... We are an authorized JIC Magic dealer and are able to custom order you any suspension parts you need. As for the other parts you are inquiring , please reach me direct for availability and pricing...

wicked s13~ Email Sent!!! I will be visiting Denver, Co this Tues~Thurs on business... Are there any good tuning shops or places to go while i'm in town... Especially any nite life info. would be :D :D ...

Domexicano~ Email Sent!!! We just sold our last 2jz clips .. please let me know if your friend would like to order one....

Since, I will be out of town between the dates of 2/18~2/20.. Please allow me a few days to reply to any messages you guys and gals might have...


Regards,
David

[2kvsix]

so when is the next sr20det special going to happen? interested in what price you have to get a SR20det redtop swap shipped to Dallas (75228)?

[davies2k]

2kvsix ~ I am not certain when our next special will be.. I have one very clean redtop avail for immediate shipping if your interested... Please call me for shipping info..


Just got back from Colorado.... What a gorgeous State.. especially driving along those curvy mountain roads... :) :)


I am back in town and may have missed several calls.. Please reach me with any questions.

David
WWW.JDMRecycler.com

[davies2k]

***Update***

Two of our guys just recently returned from Asia to hand pick our next large shipment.. They were able to find some very clean parts for our cars.... I will update pics as they become avail... We are expecting 30 more clips in this next shipment.

I currently just recieved two very clean mid mileage S14 clips.. Please reach me direct if your interested.. These are getting harder to find...

Regards,
David

[davies2k]

For those interested WWW.SpeedtrialUSA is having a private event this coming week 3/22/03 at the Big track at Willow Springs.. hurry and sign up before sessions are closed... Come and drive the fastest track in the west :)

David

[four]

Yay, you're getting a new shipment. perfect timing from me. I'm looking to get a clip within the next month or two. When do you think you'll be getting this new shipment? TAKE YOUR TIME :p .... Also, as soon as pricing becomes available, please e-mail me at [email protected] Thanks

[fridexter]

Hey David, not sure if you remember me but this is Dan with the 91 white 240sx. I'm still waiting for those coilovers in this coming shipment. Hopefully it's not too far off before they're in at your shop. Definately can't wait. :D

-Dan

[thecancer]

i have cash and want one //// i wont need most the clip(cus im not putting it into a 240) so if anyone wants stuff off it email me and we can work it out

[FriscoMgM2]

David, I am very interested in the SR deals you have been giving everybody! Man if I would have had 2500 for the installed deal I would'ave been all over it. Now I have some dough though and am ready and looking for a full sr swap on my 89 auto. I will try to give you a call tomorrow!

[saga240]

Hey David do you carry any parts for the mr2?.. specifically SW20 ones.. =) hehe just let me know

[fridexter]

To all the people who have questions for David, the best way to reach him is through his number @ 714.713.1749. He's a really nice guy and will answer all your questions, so give him a call. ;)

-Dan

[saga240]

yea hes even nicer in person

:)

ill just post here.. hah i wouldnt call him for anything until im absolutely sure i want to buy stuff.. hes a busy guy and i dont wanna waste his time.. heh

[TM180sx]

Hi, I'm looking for a SR power steering pump with all the hoses, bracket and bolts. Let me know if you have any available, thanks!! My email address is [email protected]

[reccakun08]

need this to come back alive!! someone start a GB for sr20's

[four]

Yes, Agreed. Someone start one within the next month or so.

[VLOWS13]

I'm very interested in a group buy as well

[andrave]

If davies happens to come around again, I'm shopping for a ca18det clip. [email protected] if you can help.

[Rick-95ZE]

count me in, if you get it going

[DSMDriver]

Anyone know if David is still sellin Clips?

[davies2k]

Hey Ladies and Gents,
After many phone calls within the last few weeks, I thought it would a good idea to chime in ... As many callers have asked we have had several containers since my last post and have been very busy meeting the demands. Along with our busy race season things have been :hammer: ;) . Anyways, we are expecting our next container withing the next few weeks and have been taking orders and deposits on them.. Currently there are 12 individuals that have reserved clips with deposits. Please call me direct if anyone has any questions or would like more information about our policies or deposit programs..

Aside from staying busy sending out clips we are finishing up our JDM widebody S13.. I'm crossing my fingers for 550 Hp to the wheels.. I"ll post some pices and detailed shots of our new monster project... Peace

David N
WWW.JDMRecycler.com
714.713.1749

[240sxspeedracer1]

the website doesn't seem to work anymore...

[s15lover]

Hey man I was really impressed by your balls to shoot prices that well...and I didn't believe it either till I went to the site...anyway sorry for not believing...anyway here's what I need you tell me the lowest price you can give me and tell me if you give out foodstamps cuz this is gonna break my wallet seriously...I just need this stuff priced cuz I'm still waiting on Mckinney, night7, supertunermtrsports, and some other companies to shoot some more info back my way but I'm guessing pretty well on this judging from the SCC article this month hybrid how to...Anyway I need a low mileage clean RB26dett w/ RB25 RWD tranny and R33 crossmember...I'm getting the mounts from Mckinney and most likely the driveshaft...also...see what you can do with this...I've tried contacting imporfan.com and even the manufacturer BN sports and have had no luck ...bn sent me to racegears but you have to download the jap characters...I need a widebody blister kit mix for my 96's14.5 and it's gotta be lower than importfan.com...cuz my s15's broke me I searched for a long time and got a pair of silver housing s15 projectors for 820...beats black housings ya heard...anyway see what you can do with all that...if you can't do that kit then I have some other nice stuff I'd like YOU to price off autoimaging.com...thanx pal---Joe--private 240 parts broker

[meme]

i paided $2300+tax+shipping. i thought i was getting the cluster,pillow mounts,coilovers,brakes,lights etc.. as the clip was showed to me. i didn't even try to deal and brought the cash about 1-2 hours later. the clip was delivered to me that day( i live a city over). when it came all the parts were gone! at the time he said nothing about stripping it off the parts that made it a really good deal. this guy jsaon said it was company policy to stripe it before they deliver it. now there was a clip they were shipping out that day that still has all that stuff intact. oh the oil pan was dented to. but he had said he lifted the clip up to check the oil pan.

so my experiance with them is not good. i saw some of the parts up on ebay after i got the clip. am i going back to get another clip hell no.

[davies2k]

Meme,
I am glad to hear you recieved your clip the same day you purchased your Clip.. In order to offer the best prices around we do remove all of the non essential parts for resale. Jason did mention to you that if you would like the parts that he would offer them to you at a highly discounted rate to appease your needs. As for the clips you saw packaged with all the parts intact. Those are mostly for our customers who do request all the parts and have paid for them separately.

As for the terms of shipping. We are not a licensed shipping company and do not do door to door shipping on a regular basis. Before we prepare any clip for shipping we always inspect for any missing parts, broken parts and also check for "dented oil pans". In your case you did not have your own shipping company and wanted the clips ASAP. Jason in efforts to service you volunteered our company truck and trailer to deliver the clip to your garage without any heavy lifting equipement at your place. As you know you had to basically slide the clip off our flat bed trailer, which probably resulted in a dent in your oil pan.
I think this is minor considering a shipping company would have prolly charged you over $500 to deliver this size clip to your garage on the same day.. what you saved is definately worth 30 minutes of your time repairing the dent on the oil pan.

If you havent done so.. repair work on Sr oil pans is extremely easy.. basically remove all the 10 mm bolts that hold the oil pan to the block. Clean the excess oil out of the inside of the pan, using the handle of a hammer knock out the dents against the floor or a flat surface.. Thats it.. :hammer:

This would have prolly been much easier for you then spending the time on this forum spilling your short sighted frustration on this thread. Please vent your concerns through the appropriate channels. If you any question please contact me directly.

Regards,
David
714.713.1749

[mbmbmb23]

Maybe all the extra "non essential" parts should be removed before showing off the clips if it's not made EXTREMELY blatantly clear to the customers what all is considered "non essential"? I realize its a waste of your time to remove these extra parts if the customer wants them (by paying extra), but how on earth can someone decide to buy a clip and yet not realize it'll get completely stripped of all the goodies unless they pay extra for them?

-m

[zero.counter]

Originally posted by davies2k

This would have prolly been much easier for you then spending the time on this forum spilling your short sighted frustration on this thread. Please vent your concerns through the appropriate channels. If you any question please contact me directly.

Regards,
David
714.713.1749
Ouch, getting a little defensive there. This kind of unprofessional attitude is why I went with another clip seller located in SoCal in the past. I dealt them down and made sure that I was getting what I asked for.

He almost sounds worried that his companies image was hurt by someone posting a review. Thats life buddy. Oh well, you win some you lose some.

:boink:

[brakeoff]

I personally had a good experience with David / JDM Recycler. I purchased my SR20DET front clip from them and had it installed through them. The swap was fast. My engine runs great. My AC is cold. It was a good price. I can't complain.

I believe the buyer has a responsibility to find out what he/she is buying also. (Come on, this is not a small amount of money we're talking about.) We discussed with David on exactly what I'd be getting while picking out my clip. I was VERY clear on what I was getting. At the end of the swap, I got exactly what I paid for, nothing less. I think it's definitely worth the time to ask questions.

David went out of his way to help me during the swap and I appreciate it. Thanks.

johnny

[meme]

not saying the motor was bad. just that i pointed to the coil-over and pillow mount and nothing was said about removing it. i never said anyting about shipping. i was fine with the shipping service that jason did. my main problem was that the parts that made the clip such a great deal was thrown out the window. i did not try and deal to get a lower price. he told me the price and came back with the money.

you as a vender should be saying ;hey i'm sorry for the missunderstanding and will try to service you better next time. and to think i was thinking about getting an s14 clip from you.

i didn't ask about the parts before paying because i thought it was included. that is my mistake so hope others learn from this .

just because jdmrecycler post on the forum doesn't make him a nice guy (not that you are bad; i do not know this guy) but you just meet this guy.so to all be carefull and ask questions like the guy above said. my next motor swap i will have to point at everything and make sure

[meme]

as the last guy said "I believe the buyer has a responsibility to find out what he/she is buying also."

it should also be the sellers responsibility to tell the customer that the so called " nonessintal" parts are not part of the special price as advertised.

so this is not really a special price.

this is business, you will always have happy customers and not so happy customers. how you respond to customers complaint shows how big headed you are. like you are alwasy right. hell you weren't even there to see the clip that day.

that first post was meant as a review. not talking **** and putting down your company. just letting others know what top look out for

the end for me.

[1121S13]

I wont discuss my experience.


But WELL PUT.

[davies2k]

AWWW!! is good to be back again. Race season is finally over and now Xmas is around the corner... For those who have been asking if we are selling clips the answer is YES!!! Tons of them.... :D :D :D:D:D

Just a recap and update on this years list of events:
5 Championship wins at the Mexicali GP and Tijuana GP, and Mexicali. This is a FIA sanctioned group that hosts Grand Prix style racing south of the border... a must see for "Grippers". It's probably the best racing south of the border tons of spicy tacos and 10,000 fans to cheer you on... Wow did i forget to mention the ladies!!!!

Tom (Speedtrialusa )and I both hold our SCCA track records at Buttonwillow... the record has not been beaten for over 1.5 years now it makes me :D knowing no one has beaten our Buttonwillow track time.

We have been traveling extensively to Asia in hope to harvest the last of the SR20Det breed.. As supply in Asia is diminishing we have be more challenged with finding usable clips to import.

The good news is we have over 150 clips available for the xmas season.. I have attached a link to the pics of the clips we have in the warehouse.. I am expecting 3 more containers within the next two weeks. We are filling up the wHouse....

Just a thought if someone would like to coordinate a get-together drop me a line I will see what we can do at the wharehouse.. maybe a bbq or something.....
\

Enjoy Happy Holidays,

http://f1.pg.photos.yahoo.com/ph/jdmrecycler2002/album?.dir=/Nov03SRinventory&.src=ph&store=&prodid=&.done=http%3a//f1.pg.photos.yahoo.com/ph/jdmrecycler2002/my_photos
David N.
WWW.JDMRecycler.com
714.713.1749

[mbmbmb23]

Where are you located??? (714?...cali??)


Also, do you ever have S13 Silvia clips with good body panels??




-m

[adey]

David is located in South El Monte, somewhat near San Gabriel, in LA county.
I've not purchased a clip from David (yet), but I've made other purchases (in excess of $1500) and I can say that he's definitely an honest seller. Their warehouse is like a playpen full of JDM engines and other toys... anyone in the area who's considering a clip should definitely go down to his shop/warehouse and check it out!

mbmbmb23 - last I checked, yes, David does/did stock S13 clips w/ body panels. Worst comes to worst, he could probably piece together a front end body panel set for you.
And yes, 714 is LA, CA.

[95zilvia]

So what's the deal now, any christmas present specials?
I've been talkin to several different companies about my SR20DET and haven't picked one specifically yet. I am a buyer looking for an engine/JDM s13 front end swap. I was really impressed by the $2500 installed deal you had about a year ago.
If you're still out there davie, please come back! :P We need you

[davies2k]

Hey Adey,
I have'nt heard from you for some time.. busy with school?? anyways you have to update me on your project car or stop by the shop....

mbmbmb23~ Yes, as Adey replied we are located in S. El Monte , Ca. We have about 15 Silvia conversion in stock.

95Silvia~ YOU had to ask so Yes, we are having a Xmas deal this year with the installes and motors.. Please call me for further details.

[Sliding_S14]

not sure if its been answerd (7pages I could have missed something) but was wondering how much a rb25det motorset would set my wallet back? hoping to pick up spring/summer and install next winter. And i know you do sr installs but what about rb's? and the length of the install/price?

[240KAT]

Hey, my KA just seized up, so I guess I'll buy my motor a little early. Lol, you still have the full front Silvia clips for 2500? Also, where is Rowland Heights? Do you have any pics? (this might be a dumb question) but do any of the full silvia clips come with blacktops? If not, im not really that worried about the variable timing. Last time my car decided to try changing its timing on its own, all my valves went crazy like so many black women's weaves. :axe:

[doriftomunkee]

hey davies..still have any clips in stock...i would love to buy a clip from you with the panels and lights for the conversion...$2500 you said? how much shipping to orlando fl...im ready to order and i have money on hand..any pics...GIVE ME MORE INFO bro...thanks

jap

[ldjinfernol]

Davies i sent you an email. Im interested in possibly purchasing a motor from you because of ur terrific prices.

[adey]

Hey David!

Yeah, I've been really busy with school; haven't been able to play with the car (which needs a LOT of work!) much less buy nice pretty pieces for it.... I've been focusing on maintenance and upkeep. Oh well! I'll swing by some time when I have time.

Hope the racing's going well... Take care!

OH btw I'll be swinging by some time not too long from now to pick up some 180sx rotors... if you could pick out and pull off a nice set for me some time I'd be grateful. Cheers!
-AD

[tew photy]

hey i was just browsing through, and i had a few questions.

are you expecting redtops in anytime soon? if so, does that come shipped with everything you need to swap, assuming i give you a down payment.

also, how much are they now, im not sure if your prices are the same as in similar posts. depending on how good the news is, i might be able to get the ball rolling on this by later this month :)

would there be any package deal including the motor and a LSD?

and a noob question here...on a "clip" do you get the dash, steering wheel, like a car literally cut in half? because im looking for just the motor, tranny, ecu, whatever i needed to drop into my car now. thanks for the help

Andy

[adey]

Since I know david Doesn't come online too often, let me try to answer as best I can for him. To be sure, though, you'll have to give him a call. His number is listed somewhere earlier in this thread. (also try jdmrecycler.com, which is down as I write this, but may be up later)

Redtops:
JDMRecycler usually have a lot of motorsets/clips in stock, chances are that they have either an S13 redtop or blacktop available for you. S13 motors are all the same, the difference between red/black tops being that redtops are older. Aside from that there's absolutely no difference.
These clips/sets come with whatever you ask for, and price should vary accordingly. You can probably ask them to just ship out a motorset for you, although everyone agrees that a clip is easier since it will have a few peripherals that you may find handy come swap time.

Prices - you'll have to email/call. (not sure if he left an email address). I think each clip varies depending on condition, mileage etc. FWIW, I would expect to pay no less than $2300 - 2500 for a good working clip (not motorset - that should be very slightly cheaper). Again, I can't be sure, so get in touch with David!

As for LSD - You'd save on shipping, but as for price, I don't know what he can give you. Again, get in touch with him.

Re: clips--
Yes, clips usually come with everything forward of the A-pillars, sometimes if you get lucky, everything (almost) forward of the B-pillars. Keep in mind that sometimes there will be front end damage causing radiators etc ("peripherals) to be damaged. Usually body panels will not be useable without repair.
So - Yes, it usually comes with dash, steering wheel, ac and all.
Again, let me reiterate that you WILL need more than just motor, tranny and ecu to get the thing working in your car.

Good luck, and for more detailed answers give David a call!

-AD