nevaland9
10-24-2007, 11:44 AM
Selling for my over the border buddy Sasha from Sequence Garage, Super cool guy check out his site. DO IT!
http://www.sg-motorsport.com/main.html
Everything is firm, racer's discount is already included in the price haha
email me at [email protected] with any questions
Brakes:
300zx Front Calipers w/ Brembo Rotors – one event 250$
300zx Rear Calipers w/ Brembo Rotors – three events 250$
Custom steel braided brake lines – 40$
Hawk Blue Racing Pads Rear – two events – 40$
Ferrodo DS300 Racing Pads Front (300$ pads) – one event – 80$
This is everything you need to do a 4 wheel 300zx brake upgrade and have spare racing pads for when you go to the track
Looking for 620$ For Everything
Engine:
SR20DET S14 NVCS w/ HKS Step 1 Cams, Apex’I 86mm headgasket – 350whp, 350wtq still running perfect. Does not burn oil or puff – 1000$
Intake manifold with SARD 850cc injectors – 200$
Stock exhaust manifold with Garrett GT2871 0.86 a/r turbo, megan exhaust housing, 3” silicone outlet coupler 90degree, taka turbo lines – 650$ *NOTE: Compressor wheel has small damage from debris, one water line is sealing but is in poor condition and should be replaced before being used, will replace for additional 50$
RPS Max 6puck Clutch and JUN Flywheel – 600$
MSD Intake manifold mounted coils, with spark plug wires and wiring harness – 200$ - WILL FIX YOUR IGNITION BREAKUP!
Total Motor Package With Clutch And Both Manifolds: 2400$
Cooling:
SG Motorsport Oil Cooler w/ Remote oil filter and Setrab core, AN-8 lines, adapter for S14 oil filter block adapter, with mounts for S14. Includes AIM Oil temp and Oil Pressure sensors in Filter block adapter: 350$
Koyo S14 Aluminum Radiator With Insane Ford Tarus Fan: 250$
Samco Radiator Hoses – Blue, cut for Koyo: 50$
Plumbing:
3” Oval side exit exhaust – 150$
GReddy R-SPL Intercooler piping for S14 SR plus 2” stainless hotpipe with Greddy Type-R BOV, SG-Motorsport coupler brace, all couplers and clamps, in good condition with taiwain intercooler core with brackets – 500$ *intercooler has a small leak which has been patched with resin, a new core can be purchased from bing if you care about looks.
Drivetrain:
B&M Shortshifter modified for easier 5th gear engagement: 150$
S14 SR20DET Transmission In Amazing Shape: 240$
Axles: 100$ for both
Suspension:
S14 Rear subframe painted orange with 5lug hubs including SPL SOLID HUB SPHERICAL BUSHINGS (550$), bings.ca suspension arms, energy suspension lower control arm bushings, everything is SOLID in this subframe. Solid aluminum subframe mounts, solid aluminum diff mounts
750$ - with diff for 1350$
Stance GR3+ Tripple adjustable shocks with 10/9 springs, setup and ready to race on, discontinued from stance – GREAT shocks – 1500$
Front S14 5lug hubs with lower control arms and Cusco TC rods: 250$
JIC Strut tower bars, front and rear: 250$
Electronics:
AIM Motorsports PISTA Dash, works with AEM and all sorts of ballerness – 1500$
AEM EMS with internal wideband for S14 SR – 1200$
SG Motorsport modified engine wiring harness for AEM EMS – 350$
SG Motorsport chassis wiring harness with switchboard including pit speed, boost up, fuel pump 1 + 2, lights, ecu, ignition, starter, aux ems switch, connects to AEM EMS and AIM motorsports dash, wiring for headlights, taillights, brake lights, alternator, starter etc. works with stock gauge cluster for speedo, for more options add it in yourself. – 700$
This is something that is better for you to buy as a package, as everything is designed to be integrated into each other, the chassis harness, the aim and the aem ems. On their own they will take a lot of time to setup to whatever system you are using. Package price – 3400$.
Shell and Bodywork:
Smashed carbon hood – 400$
Smashed overfenders – 200$
Smashed rear bumper – 20$
Smashed side skirts – 100$
Come see it to decide for yourself if you want it haha
Bare shell, non rolling, with CASC certified roll cage, mounts for flatbottom and diffuser (flat bottom and diffuser included) has some damage that would require some potential pulling or hammering – 1500$
Chargespeed Carbon Fibre Trunk painted blue with holes for hoodpins and APR wing: 400$
APR GTC-300 wing, minor damage to mounting point on wing and cut wing stands (both can be purchased from APR) – 600$
[email protected] E-mail Sasha for part inquires or call him
__________________
http://www.sg-motorsport.com/main.html
Everything is firm, racer's discount is already included in the price haha
email me at [email protected] with any questions
Brakes:
300zx Front Calipers w/ Brembo Rotors – one event 250$
300zx Rear Calipers w/ Brembo Rotors – three events 250$
Custom steel braided brake lines – 40$
Hawk Blue Racing Pads Rear – two events – 40$
Ferrodo DS300 Racing Pads Front (300$ pads) – one event – 80$
This is everything you need to do a 4 wheel 300zx brake upgrade and have spare racing pads for when you go to the track
Looking for 620$ For Everything
Engine:
SR20DET S14 NVCS w/ HKS Step 1 Cams, Apex’I 86mm headgasket – 350whp, 350wtq still running perfect. Does not burn oil or puff – 1000$
Intake manifold with SARD 850cc injectors – 200$
Stock exhaust manifold with Garrett GT2871 0.86 a/r turbo, megan exhaust housing, 3” silicone outlet coupler 90degree, taka turbo lines – 650$ *NOTE: Compressor wheel has small damage from debris, one water line is sealing but is in poor condition and should be replaced before being used, will replace for additional 50$
RPS Max 6puck Clutch and JUN Flywheel – 600$
MSD Intake manifold mounted coils, with spark plug wires and wiring harness – 200$ - WILL FIX YOUR IGNITION BREAKUP!
Total Motor Package With Clutch And Both Manifolds: 2400$
Cooling:
SG Motorsport Oil Cooler w/ Remote oil filter and Setrab core, AN-8 lines, adapter for S14 oil filter block adapter, with mounts for S14. Includes AIM Oil temp and Oil Pressure sensors in Filter block adapter: 350$
Koyo S14 Aluminum Radiator With Insane Ford Tarus Fan: 250$
Samco Radiator Hoses – Blue, cut for Koyo: 50$
Plumbing:
3” Oval side exit exhaust – 150$
GReddy R-SPL Intercooler piping for S14 SR plus 2” stainless hotpipe with Greddy Type-R BOV, SG-Motorsport coupler brace, all couplers and clamps, in good condition with taiwain intercooler core with brackets – 500$ *intercooler has a small leak which has been patched with resin, a new core can be purchased from bing if you care about looks.
Drivetrain:
B&M Shortshifter modified for easier 5th gear engagement: 150$
S14 SR20DET Transmission In Amazing Shape: 240$
Axles: 100$ for both
Suspension:
S14 Rear subframe painted orange with 5lug hubs including SPL SOLID HUB SPHERICAL BUSHINGS (550$), bings.ca suspension arms, energy suspension lower control arm bushings, everything is SOLID in this subframe. Solid aluminum subframe mounts, solid aluminum diff mounts
750$ - with diff for 1350$
Stance GR3+ Tripple adjustable shocks with 10/9 springs, setup and ready to race on, discontinued from stance – GREAT shocks – 1500$
Front S14 5lug hubs with lower control arms and Cusco TC rods: 250$
JIC Strut tower bars, front and rear: 250$
Electronics:
AIM Motorsports PISTA Dash, works with AEM and all sorts of ballerness – 1500$
AEM EMS with internal wideband for S14 SR – 1200$
SG Motorsport modified engine wiring harness for AEM EMS – 350$
SG Motorsport chassis wiring harness with switchboard including pit speed, boost up, fuel pump 1 + 2, lights, ecu, ignition, starter, aux ems switch, connects to AEM EMS and AIM motorsports dash, wiring for headlights, taillights, brake lights, alternator, starter etc. works with stock gauge cluster for speedo, for more options add it in yourself. – 700$
This is something that is better for you to buy as a package, as everything is designed to be integrated into each other, the chassis harness, the aim and the aem ems. On their own they will take a lot of time to setup to whatever system you are using. Package price – 3400$.
Shell and Bodywork:
Smashed carbon hood – 400$
Smashed overfenders – 200$
Smashed rear bumper – 20$
Smashed side skirts – 100$
Come see it to decide for yourself if you want it haha
Bare shell, non rolling, with CASC certified roll cage, mounts for flatbottom and diffuser (flat bottom and diffuser included) has some damage that would require some potential pulling or hammering – 1500$
Chargespeed Carbon Fibre Trunk painted blue with holes for hoodpins and APR wing: 400$
APR GTC-300 wing, minor damage to mounting point on wing and cut wing stands (both can be purchased from APR) – 600$
[email protected] E-mail Sasha for part inquires or call him
__________________