R32 Rotors GTS?

[guitaraholic]

I have a set of R32 calipers (aluminum), I installed them thinking that the Z32 rotors would work. However, after installing them, I found that the rotors are a bit to small with about 1/4" extending past the outside the the rotor (11"). I did a little research and found the Z33 rotors are 11.6" which would be about right. Is the offset off for the rotors the same as Z32 rotors,, basically asking,, are they the same as Z32's just bigger and a tiny bit thinner?

[Ca_laurier]

are you sure you have gts calipers???

because between the 2 they are exactly the same. when doing brakes on a r32 gts we just use z32 turbo parts. so you could have gtr calipers

[guitaraholic]

After doing a bit more research, They are R32 gtr rotors,, will Z33 rotors work, or maybe VR4 rotors, they are almost exactly the same dimension.

[Ca_laurier]

i would get ahold of rbmotoring and ask them. rotora also makes a rotor for the r32 but i will ask around. i ussually only deal with gts cars at my work and rarely see bnr32's

[drift freaq]

are you sure you have gts calipers???

because between the 2 they are exactly the same. when doing brakes on a r32 gts we just use z32 turbo parts. so you could have gtr calipers

That is false R32 GTR Calipers and R33 GTST calipers are 32mm and the rotors are around a 1/2 larger in diameter than the Z32 TT rotor. If your hanging off the edge you either have R33 GTST Calipers or R32 GTR calipers.

[Sileighty_85]

the R32 GTS (NA) uses Single Piston Calipiers so the rotors are gonna be smaller
The R32-R33 GTS-T's or GTS25-T (Turbo Models) Use the Same setup as the Z32 TT Bake System
Sooo No the R32 GTS Rotors will not work with Z32 Calipers