PDA

View Full Version : new bee question..s13 into a s14 chasis


tony96240sx
10-16-2007, 02:43 PM
i did some search before i posted this up here..i was wondering if anyone has a good write up and wire diagram if i am putting a red top s13 engine into a s14 chasis..

which intercooler do i go with..a s13 or s14 IC kit?

hey thanks guys..sorry for the new bee questions..

azndoc
10-16-2007, 02:46 PM
You would go with a S13 FMIC kit.

I don't have the diagram your looking for though.

stinky_180
10-16-2007, 02:59 PM
kinda confused, two responses with two different answers? or can you use either or?

S14DB
10-16-2007, 03:02 PM
Use the FMIC kit for the engine you are using. KA uses the S13 kit.

azndoc
10-16-2007, 03:05 PM
The TB/Intake manifold and turbo compressor outlet tube are at different position for the two engines.

You would go with the engine, not the car.

So if your putting a S13 redtop into a S14 you would use a S13 FMIC kit and if your using a S14 engine into a S13 then you would use a S14 FMIC kit. Then the whole drilling holes for the pipings are different too. But that doesn't concern the OP.

stinky_180
10-16-2007, 03:07 PM
Use the FMIC kit for the engine you are using. KA uses the S13 kit.

that was fast. thanks for clearing that up.... for us noobs :bigok:

tony96240sx
10-17-2007, 06:13 AM
thanks for the response...now for the wiring the s13 into a s14 chasis..i was thinking of sending the dam thing out to wire specialties. ?

Sileighty_85
10-17-2007, 08:54 AM
thanks for the response...now for the wiring the s13 into a s14 chasis..i was thinking of sending the dam thing out to wire specialties. ?

definatly! I sent mine off to them, its totally worth it, mine dropped right in and fired up first time, With no problems

vvtisupra
10-17-2007, 10:07 AM
i used an s13 hot pipe and stock sidemount and stock s13 cold pipes and stock s13 air box

LongGrain
10-17-2007, 10:21 AM
Use the FMIC kit for the engine you are using. KA uses the S13 kit.

correction, DOHC KA uses the s13 kit, sohc would use the s14

statik
10-17-2007, 10:29 AM
i did some search before i posted this up here..i was wondering if anyone has a good write up and wire diagram if i am putting a red top s13 engine into a s14 chasis..

which intercooler do i go with..a s13 or s14 IC kit?

hey thanks guys..sorry for the new bee questions..

s13 sr20det ECU pinout (http://static.carvolution.org/files/S13%20SR20%20full%20pinouts.pdf)

s13 sr20det into s14 chassis wiring guide (http://static.carvolution.org/files/S13SRInstallationIntoS14.pdf)

tony96240sx
10-17-2007, 01:46 PM
dam you guys are good....thanks for the quick response..i keep you guys posted