Brownrice
10-14-2007, 11:55 PM
Ok guys, Have a few things lying around I want to sell (yeap, just like everyone else it seems like lately!). First off prices are all without shipping. Everything is OBO. All parts are located in SoCal and pickups are happily accepted. I am located in the 951. emails will be the fastest way to get my attention, then come PM's, then forum posts. I'll be happy to answer any questions to the best of my knowledge. I think I covered it...here is the stuff...
HKS CAST RB25 Manifold. It's drilled for a T3 turbine but has enough surface to also mount a T4. (see picture for reference) It's a bottom mount. Reason I'm selling is with a precision 60-1 turbo and mckinney mounts just wont fit. SEEN that it fits with skyline crossmember though. Has flange for HKS wastegate. Nice cast piece keeping runners 123 seperate from 456 all the way to the divided housing for the turbo and wastegate! small crack at the divider across. (see picture for reference) does not affect performance at all. looking to get SOLD
http://i30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/IMG_0540.jpg
http://i30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/IMG_0451.jpg
http://i30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/IMG_0461.jpg
For the rest of the pictures goto:HKS MANIFOLD (http://s30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/)
Next is a RB25 Downpipe. It's a true 3 inch diameter and a direct bolt on. This unit still retains the stock cat configuration. It's jet hot coated. comes with no bolts or gaskets. NOT ebay item, custom made locally. can get hardware at additional cost if you REALLY need them. looking to get $150 for it.
http://i30.photobucket.com/albums/c336/rafael80/rb25%20downpipe/IMG_0429.jpg
http://i30.photobucket.com/albums/c336/rafael80/rb25%20downpipe/IMG_0428.jpg
complete album here: RB25 Downpipe (http://s30.photobucket.com/albums/c336/rafael80/rb25%20downpipe/)
Next is my Intercooler piping with HKS BOV and flange on it. It is made of stainless steel except for the reducer at the Q45 throttle body which is aluminized steel. This was fabricated by Mckinney Motorsports using a 2 inch hot side and 2.5 cold side. Routes to any center mount bottom port intercooler. Made for stock turbo to greddy intake manifold and Q45 throttle body but could be cut and fabricated to your spec. Will not part out. If you want BOV only tell me where to cut and I'll send it and scrap the rest. so offer accordinely! BOV has optional insert. makes a small chirp (greddy) and followed by a huge whoosh sound. perfect IMO. looking for SOLD
http://i30.photobucket.com/albums/c336/rafael80/intercooler%20piping/IMG_0449.jpg
http://i30.photobucket.com/albums/c336/rafael80/intercooler%20piping/IMG_0448.jpg
all pix:PIPING and HKS SSQV (http://s30.photobucket.com/albums/c336/rafael80/intercooler%20piping/)
Continuing on, Stock RB25 turbo. Good as of time I removed it. It has a T3 footprint. comes with everything you see attached. Held boost fine. looking to get SOLD
http://i30.photobucket.com/albums/c336/rafael80/RB25%20Turbo/IMG_0432.jpg
http://i30.photobucket.com/albums/c336/rafael80/RB25%20Turbo/IMG_0431.jpg
rest o pix: RB25 Turbo (http://s30.photobucket.com/albums/c336/rafael80/RB25%20Turbo/)
Anybody need any 6x9 JL speakers? These sound pretty good. no tears, look fine. no idea $50?
http://i30.photobucket.com/albums/c336/rafael80/JL%206x9/IMG_025.jpg
http://i30.photobucket.com/albums/c336/rafael80/JL%206x9/IMG_024-1.jpg
stock rb25 exhaust manifold. Hack it up and put an external wastegate! port it out without having your own car down. make me an offer! $40?
http://i30.photobucket.com/albums/c336/rafael80/Stock%20ex%20manifold/IMG_0439.jpg
http://i30.photobucket.com/albums/c336/rafael80/Stock%20ex%20manifold/IMG_0437.jpg
much mas pix: http://s30.photobucket.com/albums/c336/rafael80/Stock%20ex%20manifold/
anyone with a 98-02 GS300/400 daily driver? I have a Driver side non HID headlight, metra radio install kit, and RCA harness also! thanks, hit me up. For shipping quotes, please make educated guess at weight and shipping from 92507 zip code. Thanks for looking!!
-Rafael
[email protected]
HKS CAST RB25 Manifold. It's drilled for a T3 turbine but has enough surface to also mount a T4. (see picture for reference) It's a bottom mount. Reason I'm selling is with a precision 60-1 turbo and mckinney mounts just wont fit. SEEN that it fits with skyline crossmember though. Has flange for HKS wastegate. Nice cast piece keeping runners 123 seperate from 456 all the way to the divided housing for the turbo and wastegate! small crack at the divider across. (see picture for reference) does not affect performance at all. looking to get SOLD
http://i30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/IMG_0540.jpg
http://i30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/IMG_0451.jpg
http://i30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/IMG_0461.jpg
For the rest of the pictures goto:HKS MANIFOLD (http://s30.photobucket.com/albums/c336/rafael80/HKS%20MANIFOLD/)
Next is a RB25 Downpipe. It's a true 3 inch diameter and a direct bolt on. This unit still retains the stock cat configuration. It's jet hot coated. comes with no bolts or gaskets. NOT ebay item, custom made locally. can get hardware at additional cost if you REALLY need them. looking to get $150 for it.
http://i30.photobucket.com/albums/c336/rafael80/rb25%20downpipe/IMG_0429.jpg
http://i30.photobucket.com/albums/c336/rafael80/rb25%20downpipe/IMG_0428.jpg
complete album here: RB25 Downpipe (http://s30.photobucket.com/albums/c336/rafael80/rb25%20downpipe/)
Next is my Intercooler piping with HKS BOV and flange on it. It is made of stainless steel except for the reducer at the Q45 throttle body which is aluminized steel. This was fabricated by Mckinney Motorsports using a 2 inch hot side and 2.5 cold side. Routes to any center mount bottom port intercooler. Made for stock turbo to greddy intake manifold and Q45 throttle body but could be cut and fabricated to your spec. Will not part out. If you want BOV only tell me where to cut and I'll send it and scrap the rest. so offer accordinely! BOV has optional insert. makes a small chirp (greddy) and followed by a huge whoosh sound. perfect IMO. looking for SOLD
http://i30.photobucket.com/albums/c336/rafael80/intercooler%20piping/IMG_0449.jpg
http://i30.photobucket.com/albums/c336/rafael80/intercooler%20piping/IMG_0448.jpg
all pix:PIPING and HKS SSQV (http://s30.photobucket.com/albums/c336/rafael80/intercooler%20piping/)
Continuing on, Stock RB25 turbo. Good as of time I removed it. It has a T3 footprint. comes with everything you see attached. Held boost fine. looking to get SOLD
http://i30.photobucket.com/albums/c336/rafael80/RB25%20Turbo/IMG_0432.jpg
http://i30.photobucket.com/albums/c336/rafael80/RB25%20Turbo/IMG_0431.jpg
rest o pix: RB25 Turbo (http://s30.photobucket.com/albums/c336/rafael80/RB25%20Turbo/)
Anybody need any 6x9 JL speakers? These sound pretty good. no tears, look fine. no idea $50?
http://i30.photobucket.com/albums/c336/rafael80/JL%206x9/IMG_025.jpg
http://i30.photobucket.com/albums/c336/rafael80/JL%206x9/IMG_024-1.jpg
stock rb25 exhaust manifold. Hack it up and put an external wastegate! port it out without having your own car down. make me an offer! $40?
http://i30.photobucket.com/albums/c336/rafael80/Stock%20ex%20manifold/IMG_0439.jpg
http://i30.photobucket.com/albums/c336/rafael80/Stock%20ex%20manifold/IMG_0437.jpg
much mas pix: http://s30.photobucket.com/albums/c336/rafael80/Stock%20ex%20manifold/
anyone with a 98-02 GS300/400 daily driver? I have a Driver side non HID headlight, metra radio install kit, and RCA harness also! thanks, hit me up. For shipping quotes, please make educated guess at weight and shipping from 92507 zip code. Thanks for looking!!
-Rafael
[email protected]