240RS Maxi Twin Scroll Turbo Setup FS

[driftstyre]

The turbo is a Lancer Evolution 6 Tommi Makkinen with a Titanium Aluminide turbine/shaft designed for high EGT/Antilag. It has the newest Evo 9 turbine housing with the single flap wastegate. This turbo produces great torque and made 360 ft/lbs, 322 hp at the wheels on our Dyno Dynamics. A stock WRX makes 150-160 here, Evo 210-220. The long tube twin scroll manifold is 304/321 stainless, turbine/compressor outlets are 304. The compressor outlet is also included as well. The turbo is $1050 new. I have put less than 1000 competition miles on it with 4 oil changes. The turbo is in great shape but I need more hp so I will be stepping up to a GT30 based turbo. No cracks in the manifold or turbine outlet.
The one off manifold, turbine/compressor outlets would cost ~$2500+ to make for an SR20. I am asking $1500 for all four items. I would consider selling the manifold, turbine outlet and compressor outlet (minus turbo) for $900. There would need to be some fabrication involved and though this setup bolts on to the engine, it would need an intake, oil lines and a few other items.

http://www.dentsport.com/gallery/d/6823-2/five.jpg

New 16 months ago.
http://www.dentsport.com/gallery/d/4388-2/twin_scroll3.jpg
http://www.dentsport.com/gallery/d/3000-2/turbo.jpg

Taken off today.
http://www.dentsport.com/gallery/d/9019-2/DSCF4572.JPG
http://www.dentsport.com/gallery/d/9024-2/DSCF4574.JPG
http://www.dentsport.com/gallery/d/9029-2/DSCF4570.JPG
http://www.dentsport.com/gallery/d/9084-2/DSCF4586.JPG
http://www.dentsport.com/gallery/d/9074-2/DSCF4584.JPG
http://www.dentsport.com/gallery/d/9079-2/DSCF4588.JPG
http://www.dentsport.com/gallery/d/9044-2/DSCF4576.JPG

[sr20detguy]

a buddy of mine is running a VERY similar setup done by Forcedfab here in dayton, ohio(www.forcedfabllc.com (http://www.forcedfabllc.com)) this past summer. His manifold is done differently though. Its a nice setup! Good luck with the sale and I will say that this is a very good setup..would recommend someone to buy!

[BLiTz]

Hey I have a S14 with S14 SR20 and was wondering if this manifold would work with AC and everything involved. My car is a street car very much unlike your track attacking beast. Im interested though I know you probably haven't test fitted it on a S14 but what is your insight since you built the kit.
Thanks let me know.

[driftstyre]

I don't think this would work with AC and I am not sure about the factory location for the power steering pump either. It should fit an S14 though.

[burnsauto]

bump for a nasty manifold :)

[Dvs1]

more pics of the car please....i nutted and i want to go again...

[driftstyre]

Here is a video of the car this July
http://www.youtube.com/watch?v=id2f4DO2hyc

Photos
http://www.dentsport.com/gallery/v/dsg/DEMO/bill240_001/

[98koukile]

I've seen this manifold in person and it's a sweet setup... I would say clearance wouldnt work on a DD with everything installed but perfect for a track car

[ichibans13.5]

bump for a sick shop and good guys

[Sil-Eighty SE-K]

iv been dreaming of the day i could take home your custom manifold bill!!!! LOL....i wish i had the money..... BUMP for the most gangsta turbo/mani setup ever!

[LoCoBooSt]

wow..... that video is some gunsi togue shit, nice driving and nice mani!

[driftstyre]

Thanks John!

someone make an offer for this stuff. Otherwise the turbo is going on EvoM and I'd rather see the whole setup go to an SR20 torque hungry monster.

[driftstyre]

Any offers? I am asking next to nothing for the amount of fabrication/time involved in making this and someone has to be crazy enough to run this. Make a reasonable offer and I will throw in the -10 oil return/custom oil pan and maybe the carbon airbox/itg filter.

[driftstyre]

I am parting this out so someone can find a second hand evo VIII turbo.
Manifold and Turbine Outlet $450.

Evo VI TME Turbo $550

[driftstyre]

$400 shipped

[IKnowAllOfNothing]

so someone could buy this manifold with out the turbo then buy a new turbo like GT3071R Twinscroll Turbo BB from full race and then just need to fabricate up a downpipe and intercooler pipes?
If so its like a full race tc manifold for a third the price...dam

[driftstyre]

$400 shipped for the manifold and turbine outlet oil return and oil pan

[yoel]

i vouch for this guy i saw this car running at lime rock in connecticut last year, the pictures dont do it justice this thing IS SICK!!!

[wantboost]

how hard would it be to replace the flange with say a divided t3 flange?
any sort of bracing included?

[driftstyre]

no bracing is provided as it was specifically for my setup but it wouldn't be hard. You could adapt a different flange if you wanted.