PDA

View Full Version : [ 240sxMotoring SALE ] Aluminum Driveshafts - FREE SHIPPING, READY TO SHIP!!!

Andrew @ 240sxMotoring
10-09-2007, 03:52 PM
240SX MOTORING PRESENTS
http://site.240sxmotoring.com/images/misc/240sx_banner4.gif


1 PIECE ALUMINUM AND STEEL DRIVESHAFTS
READY TO SHIP ON ORDER!


http://i77.photobucket.com/albums/j76/Neurowave/ds.jpg


Still got that overweight SPEC-OEM 2 piece driveshaft under that 240 of yours? WHY?! Toss that POS for this SPEC-UBER aluminum or steel driveshaft!

Want that extra snap while drifting? Want a stronger driveshaft for your beast? Missing that critical yet pesty driveshaft to finish your manual conversion? You want THIS!

Aluminum driveshafts are made from 3" diameter tubing, 6061-T6 aluminum.
These driveshafts are an simple DIRECT BOLT-IN REPLACEMENT!!

They're high speed balanced as a complete assembly, yada, yada, yada. I could throw out more technicalities out at you but the point here is that you are getting a QUALITY DRIVESHAFT.



So, how much? I won't make you go through that PM me for pricing BS. Here's the numbers:
Special over. PM or EMAIL for BEST PRICES!
DRIVESHAFTS STILL IN STOCK!

OMGWTFBBQ!! Aluminum driveshaft only $40 more!? Why WOULDN'T you get it?

Free ground shipping only to the Continental US. Everywhere else, PM me for ship quote!

S13, S14, even S15! ABS, Non-ABS, and even you crazy RB transmissions are all ready to be shipped out RIGHT NOW!



To place an order, ask me questions, or for general heckling:

EMAIL: [email protected]
AIM: CIPAndrewJ
PHONE: 203-783-1422


www.240sxmotoring.com (http://www.240sxmotoring.com/)
mtx450
10-09-2007, 04:18 PM
I can't afford one yet, but this ad is awesome! You guys rule...
khmerguy618
10-10-2007, 02:10 AM
that is a good frickin' price!
fluidd
10-10-2007, 07:46 AM
this is awesome.. i want one..

but i'm wondering.. how much of a difference will it make to put this on my stock ka24de..

right now i've got, headers, underdrive pulley, 3" catback + test pipe, lightened flywheel + stage 2 clutch.. would i gain even more response with the lightened driveshaft? and also in terms of drifting, would it be easier to lose it?
KA-T_240
10-10-2007, 11:10 PM
I will be ordering an aluminum one tomorrow!

Do you know how much lighter they are then the facotry one?
nvstyles
10-11-2007, 12:11 AM
How long are you going to have this deal for?
soon2bs13
10-11-2007, 02:11 AM
whats the advantage of running aluminum versus steel?
sunnys14
10-11-2007, 04:56 AM
just to make sure, these driveshafts are ready and in stock? i went with another vendor before and waited 2 months b4 getting a refund because the joints were on backorder...
KA-T_240
10-11-2007, 08:37 AM
whats the advantage of running aluminum versus steel?

Less wieght is the main advantage I am aware of. Lighter driveshaft=less rotational mass. And, IIRC rotational mass has an effect on HP.


Ordered! Thanks for the sweet deal.
SILEIGHTY_DET
10-11-2007, 04:40 PM
ordered yesterday , and recieved tracking number today ! awesome response time ! :D will post when i reieve product

thanks

Scott
Andrew @ 240sxMotoring
10-12-2007, 10:13 AM
just to make sure, these driveshafts are ready and in stock? i went with another vendor before and waited 2 months b4 getting a refund because the joints were on backorder...

Yep!!! Ready to SHIP ON ORDER!
ReLevent1
10-15-2007, 02:20 AM
who makes the driveshafts? and what kind of u-joint do they use?
drifter_for_life06
10-15-2007, 11:44 PM
still got this deal? if so im ordering asap
Kiro1968
10-17-2007, 08:52 AM
Hi, do you have in stock the aluminum shaft for a
1995 240sx se w/abs w/vlsd w/5spd tranny

Thank you,
KA-T_240
10-17-2007, 10:06 PM
Got mine today, now to figure out what kind of modification you guys are talking about(on your website) to clear KAs cause the trannys are pretty much the same. You got pics
boosteds14
10-18-2007, 06:44 AM
Got mine today, now to figure out what kind of modification you guys are talking about(on your website) to clear KAs cause the trannys are pretty much the same. You got pics

see that dust boot at the end of the tranny? just knock it off.
DALAZ_68
10-18-2007, 10:29 AM
for those needing the info...and theres plenty
Stock 2-piece 20lb
Steel 1-piece 15lb
alum 1-piece 11lb

and yes non abs / abs matters
Andrew @ 240sxMotoring
10-22-2007, 12:30 PM
Back to full stock! Driveshafts still readily available!
Temple240
10-25-2007, 02:36 PM
Can't wait to get my drive shaft on the car. Shipping was insanely fast! Thanks guys.
evmal613
10-11-2009, 12:29 AM
how much shipped to 91381, aluminum s13 non abs
Frappe
10-12-2009, 06:28 PM
Can you shoot me the price shipped for an S14, non-abs, non-vlsd (does that matter?), to 07924? And, if any price difference, price picked up?
satal95
10-13-2009, 08:09 PM
s13 steel non-abs shipped to 78237 please DAmn just did a noob mistake just saw the original posted date. Oh well if you can still give good prices on them lmk
fckillerbee
07-16-2010, 05:32 PM
1 piece aluminum shipped to 90602 non abs s14
DRFTER34
02-23-2011, 09:12 AM
How much shipped to 75042 s13 steel drive shaft non abs