PDA

View Full Version : s13 silvia conversion

itzsolloCUH
10-02-2007, 12:24 AM
guys can anyone pls help me?
i just got my silvia conversion and for some reason the shop cant install the wiring..
they saying the wire cable does not match
i have the triple projector, and signal dont work and high beam dont work
does anyone know how to fix that problem?
projekt_s13
10-02-2007, 12:30 AM
http://img159.imageshack.us/img159/6338/zilviasb0.jpg

There are 1337323123 threads on this.
ayuaddict
10-02-2007, 03:45 AM
you had a "Shop" install your fenders, hood, bumper and lights?

wait wait

you had a "shop" that cant figure out simple wiring install your feners, hood, bumper and lights?
dvdevo
10-02-2007, 03:48 AM
step one: ask for your money back
step two: search on zilvia for wiring of silvia lights
step three: give money to appropriate place that helped you
Dirty Habit
10-02-2007, 05:52 AM
step one: ask for your money back
step two: search on zilvia for wiring of silvia lights
step three: give money to appropriate place that helped you
step four: sell your car and never touch another again

Fixed. Msglgth.
unicoladron
10-02-2007, 07:33 AM
just go out there and mess around. i was bored one day and mocked up my tri-projectors with my pop-up harness. Mine plugged right in, but yeah slight modification is needed for high-beams.
itzsolloCUH
10-02-2007, 09:41 AM
they installed everything perfet its just that high beam and signal dont work
im driving around with low beam only lol
KA24DESOneThree
10-02-2007, 09:50 AM
They installed everything else perfectly because it's REALLY, REALLY easy to install.

Why not take the car to someone who actually knows what they're doing?
PRADOgy
10-02-2007, 09:50 AM
May i ask what shop this was.... im dying to know.. even though i think i already do..
itzsolloCUH
10-02-2007, 10:18 AM
it was some shop running by mexicans i went there cuz it was cheap got my whole painted for 600 and they pulled the frame and everything for 600.. anywayz anyone can help me let those light work?
when i bought those head lights harness was cut, so i only have the wire
Suk02Si
10-02-2007, 10:30 AM
it was some shop running by mexicans i went there cuz it was cheap got my whole painted for 600 and they pulled the frame and everything for 600.. anywayz anyone can help me let those light work?
when i bought those head lights harness was cut, so i only have the wire

wtfchusey?

Its really simple, just splice a couple wires here and there. Just search, you'll find it.
SiI40sx
10-02-2007, 10:37 AM
it was some shop running by mexicans i went there cuz it was cheap got my whole painted for 600 and they pulled the frame and everything for 600.. anywayz anyone can help me let those light work?
when i bought those head lights harness was cut, so i only have the wire

bullshit, that shop isnt ran by mexican because if it WAS, they would have NO problem wiring that shit up...... we're masters in the art of splicing, electrical tape, duct tape, mickey mouse, super glue etc. If they really cant wire it up, then theyre not 100% mexicans
sil_eighteeh
10-02-2007, 10:48 AM
bullshit, that shop isnt ran by mexican because if it WAS, they would have NO problem wiring that shit up...... we're masters in the art of splicing, electrical tape, duct tape, mickey mouse, super glue etc. If they really cant wire it up, then theyre not 100% mexicans

hahahahahaha
tangch
10-02-2007, 06:30 PM
Are you sure you are going to a body shop?? or that is someone's back yard?? I think you should just pay some member here to install the front end for you.
If you have the projector headlights, you can only turn on either low or high beam at a time with the stock wiring.

1. just buy/find some light bulb plugs if that was not provided with your front end.
2. cut the wire from the H4 headlight wire to the silvia headlight that you want it to turn on
3. find turn signal wire form the 240 (the day light wire should be with with it too), get a wire that can reach the silvia corner light and the bumper light and wire them up.

It is pretty easy, try to find some article here or nico for the wiring, I am sure we have it somewhere.
Next time just search for it, people will flame you bad...
MrFairlady
10-02-2007, 06:42 PM
Pull the headlight Relay located beside Intake Mani.
Pull the whole top off the relay.May have to use a flathead to help.
Highbeams should work then pending the next step.

Only other issue could be the Bulbs.Mine gave me hell because of that.1 bulb if you hit it just right would finally cut on so I kept thinking it was the wiring but i was right from the beginning.(espically when needing H3C bulbs) but I had dual proj.Your lights should have came w/ some kind of wiring.

You have to split off the regular Blinker (Green/Blk wires I think) and run those to the blinkers so the Lights in the bumper and Corner lights blink together.
green wire is what makes it blink and not stay Soild.

Should be VERY easy @ that point your @.The hard part is Done...if you wanna call it hard even.