Z32 aluminum rear uprights, six pair available

[projectRDM]

I have no clue where I got all these, but I don't need them. $50 a pair gets them to your door unless you're in HI, PR, or somewhere crazy like that. Direct bolt on replacement for the heavy steel uprights used on S13/S14, S13s will need to use a Z32 rear shock or Z32 lower mounts for coilovers, S14 will use ECR33 rear shock or again the Z32 style lower mounts for coilovers. Knock several pounds off the back end with these, plus bushing replacement is a snap since the steel sleeves don't corrode into them like the S13/S14 does. In fact throw another $10 in and I'll press the bushings out for you so you can throw a set of ES bushings right in. Email to [email protected] for more info. I do not have pics, you guys know what they look like.

To recap - $50/pair shipped, or $60/pair with bushings removed, shipped.

[PoorMans180SX]

e-mailed

msglngth

[water]

Do they come with the little conical inserts for the balljoint? Does the bushing removal include the shock mount too?

[water]

Bump

:mepoke:

[projectRDM]

Sorry, missed this. I do not have the conical seats but can include the part number to order them, they're less than $12 new. I can press the shock mount out if you want, but due to the slight difference in angle when using them on an Schassis it's nice to keep the softer OE bushing, you need to tweak it just a hair to line it up right. A solid bushing would not allow for any play and bind up.

[PoorMans180SX]

I sent payment, any word on when you'll be shipping?

[projectRDM]

Already shipped, look for it soon.