right size rimz?

[bobbyhill]

i was wondering if 17x9+5 and 17x10+17 would be ok for a stock body s13?if you have any pic ofwheels close to this could you post them?


thanks bobby

[Luvs2slide]

i was wondering if 17x9+5 and 17x10+17 would be ok for a stock body s13?if you have any pic ofwheels close to this could you post them?


thanks bobby


Depening on the offset for the front they would fit, but I guarantee they will stick out past the body. You can always take a fender roller and puller to it definately...or get some wide fenders. You will have to pull your fenders though if you want it to look decent. They have a wheel fitment thread floating around here soemwhere...check it out.

[5t341tH]

those would fit with the right persuasion. at least a roll/pull

[smelly240]

the wheel whore thread has a ton of pics of similar specs to what ur lookin at.

[bamaboy]

Depening on the offset for the front they would fit, but I guarantee they will stick out past the body. You can always take a fender roller and puller to it definately...or get some wide fenders. You will have to pull your fenders though if you want it to look decent. They have a wheel fitment thread floating around here soemwhere...check it out.
seems to me that he listed the offset......uh 17x9 +5, and If I'm not mistaken he said stock body.......so the rest of your post was a waste of breathe

[fliprayzin240sx]

Itll all depend on the size tires you decide to run. Stretch some 225/45 up front and some negative camber. The rear, with a roll and slight pull, you can get away with 245/40s.

[bobbyhill]

Itll all depend on the size tires you decide to run. Stretch some 225/45 up front and some negative camber. The rear, with a roll and slight pull, you can get away with 245/40s.
could i go 225/40 or 215/40 so i don't have to run as much negative chamber

[Bushido]

you're gonna want the 215's with that offset up front definitely..
also, you better not be afraid of neg camber if you're running these on stock fenders.

[S14DB]

You are not going to pull a stock fender wide enough to run these.

[gotta240]

Let me save you time.

IGNORE ALL THE FUCKING RETARDED ASS COMMENTS ABOVE.(except s14db)

Stock body= NO 17x10 17.

[Aoshi112]

how bout for those who don't want to pull/roll fenders or get overfenders, running a lot of neg camber and stretching tires?? Are you restricted to mainly 17x8 in front and 17x9 in rear at about +25 offset front and back? The wheel fitment whore thread shows everyone with extreme offsets, stretched tires and fender pulling and rolling. I rather not deal with that at all. I don't need to have the deepest dish.

[FaLKoN240]

how bout for those who don't want to pull/roll fenders or get overfenders, running a lot of neg camber and stretching tires?? Are you restricted to mainly 17x8 in front and 17x9 in rear at about +25 offset front and back? The wheel fitment whore thread shows everyone with extreme offsets, stretched tires and fender pulling and rolling. I rather not deal with that at all. I don't need to have the deepest dish.

Sounds like you should stick with stock or 15x7 wheels.

[JVD]

You guys are fucking pussies. 215/40/17 front and 235/40/17 rear. Make it fit. Done.

[kensreliableb18b]

could make it fit. wouldnt look good tho on a stock body. even with 215/235 and neg. camber. backs in those specs are easier to fit, fronts i'd bump it up to around 10-12 if you want lower offset.

[JVD]

could make it fit. wouldnt look good tho on a stock body. even with 215/235 and neg. camber. backs in those specs are easier to fit, fronts i'd bump it up to around 10-12 if you want lower offset.
Ya, rears are EEEEEZZZZ. Front will be tight. Prob want wide front fenders or pound the shit out of stockers. You can pound stock fronts out quite a bit from my experience.

[CKAMC]

front offset still sounds a bit high... if it was +10 then yeah no problem but thats going to be a hard pull up front... rear idk but someone should have searched

[Aoshi112]

Sounds like you should stick with stock or 15x7 wheels.

nahh :)




msglength

[bobbyhill]

i am just going to save up more money to get some Work Equips 17x9 +15 and 17x10 +18 like this.love the car and the rims.RB motoring said they will be about $1500.sounds good to me:drool:
http://img159.imageshack.us/img159/1216/workequips0011qz9.jpg

[pimpinomar]

great s13 on this picture and i think the sizing is perfect

[ROIDMONKEY]

i am just going to save up more money to get some Work Equips 17x9 +15 and 17x10 +18 like this.love the car and the rims.RB motoring said they will be about $1500.sounds good to me:drool:
http://img159.imageshack.us/img159/1216/workequips0011qz9.jpg
17? do they come in 17? and 1500 bucks is freaking cheap for that wheel . 3 piece wheel bro, i got to call RB then :)