joewantstodrift
09-27-2007, 12:36 PM
looking to sell outright but i will consider trading for anything that runs and drives.
interior is extremely clean
RB25DET Motor (50,000 miles)
5-speed trans w/ slave cylinder
R33 GTS-T guage cluster
R33 engine crossmember
complete uncut wiring harness
ECU
HKS twin disc clutch w/ HKS flywheel
completely polished Q45 throttle body
K&N cone air filter
GReddy intake manifold (brand new)
OEM Nissan oil filter (brand new)
OEM Nissan Z32 fuel filter (brand new)
OEM Nissan oilpan (brand new)
OEM Nissan oil sump (brand new)
OEM Nissan exhaust manifold gasket (brand new)
ARP exhaust manifold studs (brand new)
Goodyear Gatorback belts (brand new)
Syko Performance engine mounts (brand new)
Syko Performance 1 piece drive shaft (brand new)
Syko Performance 3" stainless steel down pipe w/ARP bolts (brand new)
Syko Performance sway bar spacers and trans crossmember brackets (brand new)
GReddy fmic
parts needed to complete this project:
radiator
fans
ic piping
exhaust
blow off valve
THINGS YOU SHOULD KNOW:
I HAVE EVERYTHING TO PUT THE FRONT END BACK TOGETHER.
there are 2 exh. mani. studs broken off flush in the head. i've already bought new ARP studs and a new gasket, just need to get the broken ones out.
THE CAR WILL COME WITH THE FOLLOWING UNINSTALLED PARTS:
used KYB AGX shocks with tanabe springs
R33 VLSD
R33 front AND rear brakes
350z wheels
Stock SE wheels
the interior, body, and suspension are stock. i think it has some ss brake lines and drilled rotors. call, pm, or email for any details. 217-369-3588
ASKING PRICE IS $7200 FOR EVERYTHING LISTED ABOVE
i am willing to negotiate.
-Joe
interior is extremely clean
RB25DET Motor (50,000 miles)
5-speed trans w/ slave cylinder
R33 GTS-T guage cluster
R33 engine crossmember
complete uncut wiring harness
ECU
HKS twin disc clutch w/ HKS flywheel
completely polished Q45 throttle body
K&N cone air filter
GReddy intake manifold (brand new)
OEM Nissan oil filter (brand new)
OEM Nissan Z32 fuel filter (brand new)
OEM Nissan oilpan (brand new)
OEM Nissan oil sump (brand new)
OEM Nissan exhaust manifold gasket (brand new)
ARP exhaust manifold studs (brand new)
Goodyear Gatorback belts (brand new)
Syko Performance engine mounts (brand new)
Syko Performance 1 piece drive shaft (brand new)
Syko Performance 3" stainless steel down pipe w/ARP bolts (brand new)
Syko Performance sway bar spacers and trans crossmember brackets (brand new)
GReddy fmic
parts needed to complete this project:
radiator
fans
ic piping
exhaust
blow off valve
THINGS YOU SHOULD KNOW:
I HAVE EVERYTHING TO PUT THE FRONT END BACK TOGETHER.
there are 2 exh. mani. studs broken off flush in the head. i've already bought new ARP studs and a new gasket, just need to get the broken ones out.
THE CAR WILL COME WITH THE FOLLOWING UNINSTALLED PARTS:
used KYB AGX shocks with tanabe springs
R33 VLSD
R33 front AND rear brakes
350z wheels
Stock SE wheels
the interior, body, and suspension are stock. i think it has some ss brake lines and drilled rotors. call, pm, or email for any details. 217-369-3588
ASKING PRICE IS $7200 FOR EVERYTHING LISTED ABOVE
i am willing to negotiate.
-Joe