S13 OEM disk brake diameter,

[Rezlo]

Can somone please tell me what the OEM diameter of the S13 front rotors is.

Also, do the US S13's get 2 sizes of front factory fitted brakes?

[slim]

its close to 10 inches if not right on.

[UNISA JECS]

S13 w/o ABS 9.92in

S13 w/ABS 10.12in

[smelly240]

i think the jdm s13's have the same brakes as the maxima... but yeah - the abs cars have bigger brakes than non-abs

[Rezlo]

Well hell that sux, our (euro) S13's with ABS have 11" disks and ive just had 3 sets delivered.

Any idea what other cars the ABS S13's front rotors fit?

[UNISA JECS]

Well hell that sux, our (euro) S13's with ABS have 11" disks and ive just had 3 sets delivered.

Any idea what other cars the ABS S13's front rotors fit?

Thats must be becasue the euro spec use's the same calipers and rotors as the jdm S13 silvia.

[Rezlo]

Its looking that way!

What year and engine size maxima uses the same front rotors as the JDM S13's? w/abs

any idea what other nissans share front rotors with the US ones? sentra's maybe?

[UNISA JECS]

Pretty much all Altima's and Maximas and P11 Infinti G20's use 280mm x 22mm thick
except for the new current Altimas and Maximas

[Rezlo]

So I can just say, 2000 Maxima V6 and they will be right for the JDM S13?

Must remember this is an exensive mistake, costs $200 to get to me in shipping alone ;)

[UNISA JECS]

So I can just say, 2000 Maxima V6 and they will be right for the JDM S13?

Must remember this is an exensive mistake, costs $200 to get to me in shipping alone ;)

If you want 280mm x 22mm rotors they come in either 4 lug or 5 lug Altima's a re 4 lug and Maximas are 5 lug and ask for 94-97 year.

But I do believe the S13 silvia calipers use a 24mm or 26mm thick rotor to be sure measure the recesse in the caliper and if there 26mm you can use 90 300ZX NA front rotors but they will be 5 lug.

[UNISA JECS]

I forgot what the thickness was of the JDM S13 SILVIA rotors

[WISH ONE]

wow this thread helped me soo much...well... so far yet. i couldnt figure out why my rotors where 11in. on 4 lug i put my 5 lug on and the rotors where way smaller for the 5 and didnt fit my calipers on my s13.. thanks..

[2iv0 sx]

I forgot what the thickness was of the JDM S13 SILVIA rotors

180sx rotors are 22mm thick. They use mid 90s Altima 4 lug rotors along with mid 90s Maxima pads

Are those the ones you talking about? or bigger silvia brakes?

[2iv0 sx]

Double post.

[Rezlo]

Thanks guys, the rear's are even harder to find, they are right on 268mm (10.55") over all, 9mm thick (.35"), 40mm (1.5") contact area and about 54mm (2.1) hat from hub to outer surface area, any guess's to what this swaps with?