S15 T28 Ball Bearing Turbo

[cheapscheisst]

have an extra t28 ball bearing turbo from an s15 sitting around. almost no shaft play. asking $500 shipped OBO. also includes the intake and compressor outlet pipes and the bolts needed for attachment.
**edit** this is a spec-r 6-spd turbo.
http://i25.photobucket.com/albums/c73/lonelydrifters13/DSC01507.jpg
http://i25.photobucket.com/albums/c73/lonelydrifters13/DSC01509.jpg

[Sil-Eighty SE-K]

thats an s14 t28.... 1-1 is S14 and 1-2 is S15.... just so u know.... GL with sale...

[brian m]

^^^ How is that an s14 turbo? Only certain s15 turbos had the divider wall.

OP GLWS.

[cheapscheisst]

^^^ How is that an s14 turbo? Only certain s15 turbos had the divider wall.

OP GLWS.

yep. dn about the number though. it is a ball bearing, which only came w/the s15.

[JVD]

yep. dn about the number though. it is a ball bearing, which only came w/the s15.
S14 has ball bearing too.

[1five10]

Get the part number of the Garrett stamp which is a tiny metal plate. That actually looks like the Spec-R S15 turbo. The stamp will tell you exactly the Nissan OEM part number is. I can let you know which one that is with that number.

[TonKpilS14]

hmm.. if i get this i wouldnt need to buy ems to dyno my T51.

how much hp can i get out of this 1. under 300whp right?

[Sil-Eighty SE-K]

my bad...ive read the 1-1 is s14 and the 1-2 is s15....but ONLY the s15 came withthe divider wall...i totyally missed that.... and yes J-spec s14 turbos are ball bearing....aussie spec s14 t28's are not.... looks like its an s15 turbo with an s14 compressor housing....or maybe what i read about those numbers is BS..... GL anyways

[cheapscheisst]

Get the part number of the Garrett stamp which is a tiny metal plate. That actually looks like the Spec-R S15 turbo. The stamp will tell you exactly the Nissan OEM part number is. I can let you know which one that is with that number.

it has a lot of numbers on it. the number on the bottom is 466501 i think. idk if that is the right one.

[1five10]

It should be the number on top of that one..If it's an S15, it should have one of these number:

14411-91F00 = comes with the baffle like the picture you have. The best one you can buy. 6MT tranny Spec R turbo

14411-75F00 = this is also a s15 turbo but its the last generation of turbo made for the S15. Comes with Baffle.

14111-69F00 = Same as the s14 turbo ballbearing but smaller in trim/ar Its for the automatic s15.

These are the OEM S15 turbo part number...GL

[cheapscheisst]

just checked. it's 14411-91F00. guess it's the spec r then. awesome.

[stockevokiller]

Any pics of the pipes and bolts that are included? Would this be everything needed to install on a s13 redtop(besides oil lines)?

[cheapscheisst]

Any pics of the pipes and bolts that are included? Would this be everything needed to install on a s13 redtop(besides oil lines)?

for an s13 you need to either get an adapter plate for the compressor outlet or get the outlet from a ca18 so that it goes straight up and matches with your intercooler piping. (otherwise it points slightly to the side). the adapter plate is around $35 from enjuku racing (it's made by ap boss). other than that, you need oil lines and that's it. i'm going to be busy for the rest of the day, but i can get you pics of the pipe and stuff later tonight if you want.

[karlspackler]

sent pm about turbo

[karlspackler]

paypal'ed money!

[cheapscheisst]

sold! msglngth

[Gumballf355]

I have an S13 turbo, and it says 1-2 on it. Anyway of verifying it is S13 (which is what i believe, the previous owner said its an S14 ball bearing turbo) the part # is 14411-50FOO

Also i took this all apart, no ball bearings. Thats probably an indicator he didn't know what the hell he was talking about

[eclipse_dsm]

I have an S13 turbo, and it says 1-2 on it. Anyway of verifying it is S13 (which is what i believe, the previous owner said its an S14 ball bearing turbo) the part # is 14411-50FOO

Also i took this all apart, no ball bearings. Thats probably an indicator he didn't know what the hell he was talking about

That part# is for the JDM S13 T25 Turbo.

[Sil-Eighty SE-K]

so whats this???

http://a127.ac-images.myspacecdn.com/images01/57/l_a9172db75a9f892d21e10506620f2d86.jpg

[RYAN_S-14]

so whats this???

http://a127.ac-images.myspacecdn.com/images01/57/l_a9172db75a9f892d21e10506620f2d86.jpg

looks like a s14 turbo part #

[nelsboosted14]

hmm.. if i get this i wouldnt need to buy ems to dyno my T51.

how much hp can i get out of this 1. under 300whp right?

i put down 300rwhp with mine and other bolt ons, on 17psi.